Categories: Victory

Victory Hammer S (2011-12)

The Victory Hammer S is a motorcycle model produced in 2011-2012 with a four-stroke, 50-degree V twin engine that has a capacity of 1731cc. The engine has a compression ratio of 9.4:1 and is cooled by air/oil. The bike has a fuel injection system with dual 45mm throttle bodies and a battery of 12 volts and 18 amp hours. The clutch is a wet, multi-plate system, and the bike has a maximum power of 96.9 hp and a maximum torque of 153 Nm. The transmission is a six-speed system, and the final drive is a carbon fiber reinforced belt. The bike has a 33-degree rake and a trail of 140mm. It has a length of 93.8 inches and a wheelbase of 1689mm. The seat height is 660mm, and the ground clearance is 135mm. The bike weighs 305kg dry and has a fuel capacity of 17 liters. The front suspension is an inverted cartridge telescopic fork with a 43mm diameter, while the rear suspension is a single mono-tube gas system with rising rate linkage and a preload adjustable spring. The front and rear brakes are single 300mm floating rotors with four-piston and two-piston calipers, respectively. The front and rear tires are 130/70R18 and 250/40R18, respectively. The Victory Hammer S has a GVWR of 532kg or 1173lbs.


Technical specifications:

Make Model: Victory Hammer S

Year: 2011 – 12

Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder

Capacity: 1731 cc / 106 cu-in



Bore x Stroke: 101 x 108 mm

Cooling System: Air / oil

Compression Ratio: 9.4:1

Induction: Fuel Injection with dual 45mm throttle body

Oil Capacity: 5.0 qts / 4.73 ltr

Exhaust: Staggered slash-cut dual exhaust with crossover

Battery: 12 volts / 18 amp hours

Starting: Electric

Clutch: Wet, multi-plate

Max Power: 96.9 hp / 71.3 kW

Max Torque: 153 Nm / 15.6 kg-m

Clutch: Wet, multi-plate

Transmission: 6 Speed


Final Drive: Carbon Fiber Reinforced Belt

Primary Drive: Gear drive with torque compensator

Front Suspension: Inverted cartridge telescopic fork, 43 mm diameter

Front Wheel Travel: 130 mm / 5.1 in

Rear Suspension: Single, mono-tube gas, cast aluminum with rising rate linkage, preload adjustable spring

Rear Wheel Travel: 76 mm / 3.0 in

Front Brakes: Single 300mm floating rotor 4 piston caliper

Rear Brakes: Single 300mm floating rotor 2 piston caliper

Front Tyre: 130/70R18

Rear Tyre: 250/40R18


Rakem: 33 degrees

Trail: 140 mm / 5.5 in

Dimensions: Length 93.8 in / 2382 mm

Wheelbase: 1689 mm / 66.5 in

Seat Height: 660 mm / 26 in

GVWR: 532 kg / 1173 lbs

Ground Clearance: 135 mm / 5.3 in

Dry Weight: 305 kg / 672 lbs

Fuel Capacity: 17 Litres / 4.5 US gal
admin

Recent Posts

Moto Guzzi V7 750 Sport Verde Legnano (1971)

Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…

7 months ago

Moto Guzzi V9 Roamer (2016-17)

Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…

7 months ago

Honda XL 600V Transalp (1996)

The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…

1 year ago

Yamaha FZ250 (1985)

The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…

1 year ago

Roehr eSuperBike / RR (2009)

The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…

1 year ago

BSA A65R (1964-72)

The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…

1 year ago