Categories: Victory

Victory Hammer S (2009-10)

The Victory Hammer S motorcycle was produced in 2009-2010 with a four-stroke, 50-degree V-twin SOHC engine that has a capacity of 1731cc. It has a compression ratio of 9.4:1, and fuel injection with dual 45mm throttle body. The bike has a six-speed transmission with carbon fiber reinforced belt final drive and a wet, multi-plate clutch. The front suspension is an inverted cartridge telescopic fork with a diameter of 43mm, and the rear suspension is a single, mono-tube gas, cast aluminum with rising rate linkage, preload adjustable spring. The bike has a single 300mm floating rotor 4 piston caliper front brake and a single 300mm floating rotor 2 piston caliper rear brake. The front tyre is 130/70R18, and the rear tyre is 250/40R18. The rake is 33 degrees, and the trail is 140mm/5.5in. The bike is 93.8in/2382mm long, with a wheelbase of 1689mm/66.5in, and a seat height of 660mm/26in. Its dry weight is 305 kg/672 lbs, and it has a fuel capacity of 17 litres/4.5 US gal.


Technical specifications:

Make Model: Victory Hammer S

Year: 2009 – 10
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1731 cc / 106 cu-in
Bore x Stroke: 101 x 108 mm
Cooling System: Air / oil
Compression Ratio: 9.4:1
Induction: Fuel Injection with dual 45mm throttle body
Oil Capacity: 5.0 qts / 4.73 ltr
Exhaust: Staggered slash-cut dual exhaust with crossover
Battery: 12 volts / 18 amp hours
Starting: Electric
Clutch: Wet, multi-plate
Max Power: 96.9 hp / 71.3 kW
Max Torque: 153 Nm / 15.6 kg-m
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Primary Drive: Gear drive with torque compensator
Front Suspension: Inverted cartridge telescopic fork, 43 mm diameter
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas, cast aluminum with rising rate linkage, preload adjustable spring
Rear Wheel Travel: 76 mm / 3.0 in
Front Brakes: Single 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Tyre: 130/70R18
Rear Tyre: 250/40R18
Rakem: 33 degrees
Trail: 140 mm / 5.5 in
Dimensions: Length 93.8 in / 2382 mm
Wheelbase: 1689 mm / 66.5 in
Seat Height: 660 mm / 26 in
GVWR: 532 kg / 1173 lbs
Ground Clearance: 135 mm / 5.3 in
Dry Weight: 305 kg / 672 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

admin

Recent Posts

Suzuki V-Strom 800 (2024)

The 2024 Suzuki V-Strom 800 is the road-focused member of the 776 cc V-Strom family.…

23 hours ago

Suzuki GSX-8R (2024)

The Suzuki GSX-8R is a fully faired middleweight introduced for the 2024 model year. Its…

2 days ago

BMW R 1300 GS (2024)

The 2024 BMW R 1300 GS introduces a redesigned 1300 cc boxer engine and a…

3 days ago

Yamaha YZF-R9 (2025)

The Yamaha YZF-R9 joins the supersport range for 2025 with an 890 cc three-cylinder engine.…

4 days ago

Honda XL750 Transalp (2025)

The Honda XL750 Transalp combines a 755 cc parallel-twin engine with a 21-inch front wheel…

5 days ago

Honda CB750 Hornet (2025)

The 2025 Honda CB750 Hornet is a middleweight roadster powered by a 755 cc parallel…

6 days ago