Categories: Victory

Victory Hammer (2011-12)

The Victory Hammer (2011-12) is a powerful and stylish motorcycle with a 1731 cc V-twin engine that generates up to 96.9 hp and 153 Nm of torque. It has a fuel injection system with dual 45mm throttle body and a carbon fiber reinforced belt for final drive. The front suspension features an inverted cartridge telescopic fork, while the rear suspension is a single, mono-tube gas, cast aluminum with a rising rate linkage and preload adjustable spring. The front and rear brakes have single 300mm floating rotors with 4 piston and 2 piston calipers respectively. The motorcycle has a 130/70R18 front tyre and a 250/40R18 rear tyre. It has a rakem of 33 degrees and a trail of 140 mm. The Victory Hammer has a dry weight of 305 kg and a fuel capacity of 17 liters. It measures 93.8 inches in length, 66.5 inches in wheelbase, and has a seat height of 660 mm. The GVWR is 532 kg and ground clearance is 135 mm. All in all, the Victory Hammer is a high-performance motorcycle that delivers a thrilling ride.


Technical specifications:

Make Model: Victory Hammer 8-Ball

Year: 2011 – 12

Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder

Capacity: 1731 cc / 106 cu-in



Bore x Stroke: 101 x 108 mm

Cooling System: Air / oil

Compression Ratio: 9.4:1

Induction: Fuel Injection with dual 45mm throttle body

Oil Capacity: 5.0 qts / 4.73 ltr

Exhaust: Staggered slash-cut dual exhaust with crossover

Battery: 12 volts / 18 amp hours

Starting: Electric

Clutch: Wet, multi-plate

Clutch: Wet, multi-plate

Max Power: 96.9 hp / 71.3 kW

Max Torque: 153 Nm / 15.6 kg-m

Transmission: 6 Speed


Final Drive: Carbon Fiber Reinforced Belt

Primary Drive: Gear drive with torque compensator

Front Suspension: Inverted cartridge telescopic fork, 43 mm diameter

Front Wheel Travel: 130 mm / 5.1 in

Rear Suspension: Single, mono-tube gas, cast aluminum with rising rate linkage, preload adjustable spring

Rear Wheel Travel: 76 mm / 3.0 in

Front Brakes: Single 300mm floating rotor 4 piston caliper

Rear Brakes: Single 300mm floating rotor 2 piston caliper

Front Tyre: 130/70R18

Rear Tyre: 250/40R18


Rakem: 33 degrees

Trail: 140 mm / 5.5 in

Dimensions: Length 93.8 in / 2382 mm

Wheelbase: 1689 mm / 66.5 in

Seat Height: 660 mm / 26 in

GVWR: 532 kg / 1173 lbs

Ground Clearance: 135 mm / 5.3 in

Dry Weight: 305 kg / 672 lbs

Fuel Capacity: 17 Litres / 4.5 US gal
admin

Recent Posts

Moto Guzzi V7 750 Sport Verde Legnano (1971)

Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…

7 months ago

Moto Guzzi V9 Roamer (2016-17)

Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…

7 months ago

Honda XL 600V Transalp (1996)

The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…

1 year ago

Yamaha FZ250 (1985)

The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…

1 year ago

Roehr eSuperBike / RR (2009)

The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…

1 year ago

BSA A65R (1964-72)

The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…

1 year ago