Victory Hammer (2009-10)

The Victory Hammer motorcycle was produced in 2009-10 and has a four-stroke, 50 degrees V twin SOHC engine with a capacity of 1634 cc / 100 cu-in. It has a compression ratio of 9.8:1 and electronic fuel injection with 44mm throttle bodies, as well as a wet, multi-plate clutch and a six-speed transmission. The final drive is a carbon fiber reinforced belt. The Hammer has a 43mm inverted cartridge telescopic fork front suspension and a single, mono-tube gas forged and cast aluminum w/ rising-rate linkage rear suspension. The front brakes are 2x 300mm floating rotors with 4 piston calipers, while the rear brakes are a single 300mm floating rotor with a 2 piston caliper. The front wheel measures 18 x 3.5 in and the rear wheel is 18 x 8.5 in. The front tire is 130/70 R18, and the rear tire is 250/40 R18. The rake is 32.7 degrees, the trail is 140 mm / 5.5 in, and the dimensions are length 93.1 in / 2,366 mm. The wheelbase is 1669 mm / 65.7 in, and the seat height is 660 mm / 26 in. The ground clearance is 135 mm / 5.3 in, and the dry weight is 305 kg / 672 lbs. The fuel capacity is 17 litres / 4.5 US gal.

Technical specifications:

Make Model: Victory Hammer

Year: 2009 – 10
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: 2x 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Wheel: 18 x 3.5 in
Rear Wheel: 18 x 8.5 in
Front Tyre: 130/70 R18
Rear Tyre: 250/40 R18
Rake: 32.7 degrees
Trail: 140 mm / 5.5 in
Dimensions: Length 93.1 in / 2,366 mm
Wheelbase: 1669 mm / 65.7 in
Seat Height: 660 mm / 26 in
Ground Clearance: 135 mm / 5.3 in
Dry Weight: 305 kg / 672 lbs
Fuel Capacity: 17 Litres / 4.5 US gal