Triumph Bonneville SE (2013)

The Triumph Bonneville Special Edition motorcycle was released in 2013, featuring a four stroke parallel twin cylinder DOHC engine with a capacity of 865cc. The engine is air-cooled and has a compression ratio of 9.2:1, with wet sump lubrication and a maximum power output of 49kW at 7250rpm. The bike uses multipoint sequential fuel injection and has digital ignition. The clutch is a wet, multi-plate design, and the transmission is a five-speed setup with a final chain drive. The frame is tubular steel, with a twin-sided swing arm of tubular steel. The front suspension consists of Kayaba telescopic forks with 41mm diameter and 120mm travel, while the rear suspension has Kayaba chrome spring twin shocks with adjustable preload and 106mm travel. The bike has single disc brakes with dual piston Nissen floating calipers on both wheels. The wheels are cast aluminum alloy with seven spokes, measuring 17×3.0 inches in the front and 17×3.5 inches in the rear. The front tire is 100/70 R17 and the rear tire is 130/80 R17. The rake is set at 26 degrees, with a trail of 106mm. The overall dimensions of the bike are 2113mm length, 840mm width, and 1130mm height. The wheelbase is 1488mm and seat height is 739mm. The dry weight is 205kg and wet weight is 225kg, with a fuel capacity of 16 litres.

Technical specifications:

Make Model: Triumph Bonneville Special Edition

Year: 2013
Engine: Four stroke, parallel twin cylinder, DOHC, 4 valves per cylinder
Capacity: 865 cc / 52.8 cu in
Bore x Stroke: 90 x 68 mm
Cooling System: Air-cooled
Compression Ratio: 9.2:1
Lubrication: Wet sump
Engine Oil: Synthetic, 15W/50
Induction: Multipoint Sequential Fuel injection
Ignition: Digital
Max Power: 49 kW / 66 hp @ 7250 rpm
Max Torque: 71 Nm / 7.24 kgf-m / 52 ft-lb @ 6000 rpm
Clutch: Wet, multi plate
Transmission: 5 Speed
Final Drive: Chain, X-ring
Frame: Tubular steel cradle, swing arm: twin-sided, tubular steel
Front Suspension: 41mm Kayaba telescopic forks
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Kayaba chrome spring twin shocks with adjustable preload
Rear Wheel Travel: 106 mm / 4.17 in
Front Brakes: Single 310 mm disc, 2 piston Nissen floating calipers
Rear Brakes: Single 255 mm disc, 2 piston Nissen floating calipers
Wheels Front: Cast aluminium alloy, 7 spokes, 17 x 3.0 in
Wheels Rear: Cast aluminium alloy, 7spokes, 17 x 3.5 in
Front Tyre: 100/70 R17
Rear Tyre: 130/80 R17
Rake: 26 degrees
Trail: 106 mm / 4.2 in
Dimensions: Length 2113 mm / 83.2 in Width 840 mm / 33.1 in Height 1130 mm / 44.5 in
Wheelbase: 1488 mm / 58.6 in
Seat Height: 739 mm / 29.1 in
Dry Weight: 205 kg / 451 lbs
Wet Weight: 225 kg / 495 lbs
Fuel Capacity: 16.0 Litres / 4.2 US gal / 3.5 Imp gal