Laverda  Archives - MotorcycleSpecifications.com Find your motorcycle specifications Fri, 07 Apr 2023 22:07:02 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Laverda  1000 3CL (1979-81) https://motorcyclespecifications.com/laverda-1000-3cl-1979-81-specs/ Tue, 04 Apr 2023 15:57:59 +0000 https://motorcyclespecifications.com/?p=44518 The Laverda 1000 3CL motorcycle was produced from 1979 to 1981. It features a four-stroke, transverse three-cylinder engine with a capacity of 980 cc and a compression ratio of 9.0:1.

The post Laverda  1000 3CL (1979-81) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 1000 3CL motorcycle was produced from 1979 to 1981. It features a four-stroke, transverse three-cylinder engine with a capacity of 980 cc and a compression ratio of 9.0:1. Induction is through three Dell’Orto PHF carburetors and ignition is by Bosch electronic. The engine produces a maximum power output of 78 hp at 7250 rpm and a maximum torque of 86 Nm at 5000 rpm. The transmission is a five-speed and the final drive is via a chain. The bike’s front suspension consists of telescopic forks and the rear suspension is a swinging fork. Braking is provided by two 280mm discs with 2 piston calipers at the front, and a single 280mm disc with 1 piston caliper at the rear. The bike has a dry weight of 214 kg, a fuel capacity of 20.5 litres, and a consumption average of 40 mpg. The Laverda 1000 3CL has a top speed of 198 km/h (123 mph).

Technical specifications:

Make Model: Laverda 1000 3CL

Year: 1979 – 81
Engine: Four stroke, transverse three cylinder, DOHC, 2 valve per cylinder.
Capacity: 980 cc / 59.8 cu-in
Bore x Stroke: 75 x 74 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Induction: 3x 32mm Dell’Orto PHF carburetors
Ignition: Bosch electronic
Starting: Electric
Max power: 78 hp / 56.9 kW @ 7250 rpm
Max Torque: 86 Nm / 63.4 lb-ft @ 5000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Swinging fork
Front Brakes: 2x 280mm discs 2 piston calipers
Rear Brakes: Single 280mm disc 1 piston caliper
Front Tyre: 3.25 H19
Rear Tyre: 4.00 H18
Dry Weight: 214 kg / 471.3 lbs
Fuel Capacity: 20.5 Litres / 5.4 US gal
Consumption Average: 40 mpg
Top Speed: 198 km/h / 123 mph

The post Laverda  1000 3CL (1979-81) appeared first on MotorcycleSpecifications.com.

]]> Laverda OR600 Atlas (1990) https://motorcyclespecifications.com/laverda-or600-atlas-1990-specs/ Tue, 04 Apr 2023 15:34:00 +0000 https://motorcyclespecifications.com/?p=44494 The Laverda OR600 Atlas is a motorcycle from 1990 with a four-stroke, parallel twin cylinder engine. It has a capacity of 571.6 cc and a compression ratio of 9.1:1. The

The post Laverda OR600 Atlas (1990) appeared first on MotorcycleSpecifications.com.

]]> The Laverda OR600 Atlas is a motorcycle from 1990 with a four-stroke, parallel twin cylinder engine. It has a capacity of 571.6 cc and a compression ratio of 9.1:1. The bike features a Dell’Orto twin choke induction system and Bosch electronic ignition. It has a maximum power output of 50 hp at 7500 rpm and a maximum torque of 50 Nm at 4800 rpm. The transmission is six-speed and the final drive is via chain. The front suspension is air-assisted telescopic forks and the rear suspension is a single shock. The brakes are single 260mm discs with 2-piston calipers at the front and a single 230mm disc with a 1-piston caliper at the rear. The front tire is 90/90-21 and the rear tire is 130/80-17. The motorcycle has a dry weight of 151 kg and a fuel capacity of 25 liters or 6.6 US gallons.

Technical specifications:

Make Model: Laverda OR600 Atlas

Year: 1990
Engine: Four stroke, parallel twin cylinders, DOHC, 4 valve per cylinder, 180 degrees crankshaft.
Capacity: 571.6 cc / 34.8 cu-in
Bore x Stroke: 76 x 63 mm
Compression Ratio: 9.1:1
Induction: Dell’Orto twin choke
Ignition: Bosch electronic
Starting: Electric
Max Power: 50 hp / 36.4 kW @ 7500 rpm
Max Torque: 50 Nm / 36.8 lb-ft @ 4800 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Air assisted telescopic forks
Rear Suspension: Single shock
Front Brakes: Single 260mm disc 2piston calliper
Rear Brakes: Single 230mm disc 1 piston calliper
Front Tyre: 90/90-21
Rear Tyre: 130/80-17
Dry Weight: 151 kg
Fuel Capacity: 25 Litres / 6.6 US gal

The post Laverda OR600 Atlas (1990) appeared first on MotorcycleSpecifications.com.

]]> Laverda 750SF3 (1976) https://motorcyclespecifications.com/laverda-750sf3-1976-specs/ Tue, 04 Apr 2023 12:53:05 +0000 https://motorcyclespecifications.com/?p=44345 The Laverda 750SF3 is a motorcycle model that was produced in 1976. This bike features a four-stroke, parallel twin cylinder engine with a capacity of 744cc. The bore and stroke

The post Laverda 750SF3 (1976) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 750SF3 is a motorcycle model that was produced in 1976. This bike features a four-stroke, parallel twin cylinder engine with a capacity of 744cc. The bore and stroke measurements are 80 x 74mm respectively, while the compression ratio is 8.9:1. The bike has an air-cooled cooling system, two valves per cylinder, and a Bosch electronic ignition.

The engine’s power is transmitted through a wet plate clutch and a five-speed transmission to the rear wheel via a chain final drive. The bike is capable of producing a peak power output of 65 horsepower at 7,300 rpm. The 2x 36mm Dell’Orto PHF carburetors are responsible for fuel induction. Starting is via an electric system.

The Ceriani telescopic forks are present in the front suspension of the Laverda 750SF3, while the back suspension features Ceriani adjustable shocks with a swinging fork. Braking is accomplished via two 280mm discs at the front and a single 280mm disc at the rear. The front and rear tires are of sizes 3.50-18 and 4.0-18 respectively.

Other specifications of the Laverda 750SF3 include a rake of 28 degrees, trail of 82mm, and wheelbase of 1452mm. The bike has a seat height of 790mm and dry weight of 215kg. The fuel capacity is 19 liters or 5.0 US gallons. Overall, the Laverda 750SF3 is a classic motorcycle model with reliable performance and impressive specifications for its time.

Technical specifications:

Make Model: Laverda 750SF3

Year: 1976
Engine: Four stroke, parallel twin cylinders, SOHC, 2 valve per cylinder
Capacity: 744 cc / 45.4 cu-in
Bore x Stroke: 80 x 74 mm
Cooling System: Air cooled
Compression Ratio: 8.9:1
Induction: 2x 36mm Dell’Orto PHF carburetors
Ignition: Bosch electronic
Starting: Electric
Max Power: 65 hp / 47.4 kW @ 7300 rpm
Clutch: wet plate
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Ceriani telescopic forks
Rear Suspension: Swinging fork, Ceriani adjustable shocks
Front Brakes: 2x 280mm discs
Rear Brakes: Single 280mm disc
Front Tyre: 3.50-18
Rear Tyre: 4.0-18
Rake: 28.0 degrees
Trail: 82 mm / 3.2 in
Wheelbase: 1452 mm / 57.2 in
Seat Height: 790 mm / 31.1 in
Dry Weight: 215 kg / 474 lbs
Fuel Capacity: 19 Litres / 5.0 US gal

The post Laverda 750SF3 (1976) appeared first on MotorcycleSpecifications.com.

]]> Laverda  125 LZ (1977-78) https://motorcyclespecifications.com/laverda-125-lz-1977-78-specs/ Tue, 04 Apr 2023 10:07:05 +0000 https://motorcyclespecifications.com/?p=44191 The Laverda 125 LZ was a lightweight motorcycle produced in 1977 and 1978 by the Italian motorcycle manufacturer, Laverda. It was designed for commuting and city riding and had a

The post Laverda  125 LZ (1977-78) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 125 LZ was a lightweight motorcycle produced in 1977 and 1978 by the Italian motorcycle manufacturer, Laverda. It was designed for commuting and city riding and had a top speed of around 70 mph.

The bike was powered by an air-cooled, single-cylinder, two-stroke engine that produced 14 horsepower. It had a five-speed manual transmission and hydraulic disc brakes on both the front and rear wheels.

The bike had telescopic forks and dual shock absorbers in the rear, providing a comfortable ride on bumpy roads. The fuel tank had a capacity of 9 liters, which was sufficient for the bike’s city-focused use.

The Laverda 125 LZ had a stylish design with a classic look, featuring a tank with a distinctive emblem and a dual seat for the rider and passenger. The bike was well-built and reliable, but production was halted after only two years due to the company’s financial difficulties.

Today, the Laverda 125 LZ is a sought-after collector’s item among motorcycle enthusiasts. Its lightweight, maneuverable design and classic styling have made it a timeless classic, and it remains a popular bike for city riding and commuting.

Technical specifications:

Continue reading

The post Laverda  125 LZ (1977-78) appeared first on MotorcycleSpecifications.com.

]]> Laverda 500 Formula (1978) https://motorcyclespecifications.com/laverda-500-formula-1978-specs/ Tue, 04 Apr 2023 08:50:58 +0000 https://motorcyclespecifications.com/?p=44121 The Laverda 500 Formula is a motorcycle from 1978 with a four-stroke parallel twin cylinder engine, DOHC, and four valves per cylinder. It has a capacity of 497cc and a

The post Laverda 500 Formula (1978) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 500 Formula is a motorcycle from 1978 with a four-stroke parallel twin cylinder engine, DOHC, and four valves per cylinder. It has a capacity of 497cc and a compression ratio of 10.2:1. The bike has two 32mm Dell’Orto PHF carburetors and electric CDI ignition. It can produce a maximum power of 52 hp or 38.7 kW at 9500rpm. It has a six-speed transmission and uses chain drive. Its suspension features Marzocchi forks in the front and a swinging arm fork with adjustable Marzocchi shock absorbers in the rear. It also has two 260mm discs and two piston calipers for the front brakes and a single 260mm disc and one piston caliper for the rear. The front tire is 90/90 S18, while the rear tire is 110/90 H18. The dry weight of the bike is 154kg or 339.5lbs, and it has a 13.5 liter or 3.5 US gallon fuel capacity.

Technical specifications:

Make Model: Laverda 500 Formula

Year: 1978
Engine: Four stroke, parallel twin cylinders, DOHC, 4 valve per cylinder
Capacity: 497 cc / 30.2 cu-in
Bore x Stroke: 72 x 61 mm
Cooling System: Air cooled
Compression Ratio: 10.2:1
Induction: 2x 32mm Dell’Orto PHF carburetors
Ignition: Electric CDI
Starting: Electric
Max Power: 52 hp / 38.7 kW @ 9500rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Marzocchi forks
Rear Suspension: Swinging arm fork, adjustable Marzocchi shock absorbers.
Front Brakes: 2x 260mm discs 2 piston calipers
Rear Brakes: Single 260mm disc 1 piston caliper
Front Tyre: 90/90 S18
Rear Tyre: 110/90 H18
Dry Weight: 154 kg / 339.5 lbs
Fuel Capacity: 13.5 Litres / 3.5 US gal

The post Laverda 500 Formula (1978) appeared first on MotorcycleSpecifications.com.

]]> Laverda 750 Sport (1997) https://motorcyclespecifications.com/laverda-750-sport-1997-specs/ Tue, 04 Apr 2023 06:09:05 +0000 https://motorcyclespecifications.com/?p=43972 The Laverda 750S Sport is a motorcycle with a four-stroke, parallel twin engine and DOHC with 4 valves per cylinder. It has a capacity of 747 cc and a compression

The post Laverda 750 Sport (1997) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 750S Sport is a motorcycle with a four-stroke, parallel twin engine and DOHC with 4 valves per cylinder. It has a capacity of 747 cc and a compression ratio of 11.5:1. The bike is liquid-cooled and uses twin Weber-Marelli electronic injection for its induction system. The bike has an electric starting mechanism and a maximum power of 85 hp at 9200 rpm with 75 Nm of torque at 7750 rpm. The motorcycle has a 6-speed transmission and a chain final drive. The frame of the motorcycle is made of aluminum twin beam. The Paioli Racing Inverted adjustable suspension is at the front, with Paioli Monoshock adjustable suspension at the back. The front brake has 2x 320mm discs and 4 piston calipers, while the rear brake has a single 245mm disc and 2 piston caliper. The front tyre is 120/60 ZR17 with the rear tyre at 160/60 ZR17. The motorcycle’s seat height is 770 mm, while the dry weight is 185kg, and the wet weight is 202kg. The fuel capacity of the bike is 16 litres or 4.2 US gallons. The average fuel consumption is at 15.8 km/lit, and its top speed is 217.2 km/h.

Technical specifications:

Make Model: Laverda 750S Sport

Year: 1997
Engine: Four stroke, parallel twin. DOHC, 4 valve per cylinder.
Capacity: 747 cc / 45.6 cu-in
Bore x Stroke: 83 X 69 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Induction: Twin Weber-Marelli electronic injection
Ignition: Weber-Marelli electronic
Starting: Electric
Max power: 85 hp / 63.3 kW @ 9200 rpm
Max Power Rear Tyre: 81.6 hp / 60.8 kW @ 8100 rpm
Max Torque: 75 Nm / 55.3 lb-ft @ 7750 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Aluminium twin beam
Front Suspension: Paioli Racing Inverted adjustable preload, rebound & compression damping
Rear Suspension: Paioli Monoshock adjustable spring preload, rebound & compression damping
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 245mm disc 2 piston caliper
Front Tyre: 120/60 ZR17
Rear Tyre: 160/60 ZR17
Seat Height: 770 mm / 30.3 in
Dry Weight: 185.0 kg / 407.9 lbs
Wet Weight: 202 kg / 445 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Consumption Average: 15.8 km/lit
Braking 60 – 0 / 100 – 0: 13.7 m / 39.4 m
Standing 1/4 Mile: 11.9 sec / 180.8 km/h
Top Speed: 217.2 km/h

The post Laverda 750 Sport (1997) appeared first on MotorcycleSpecifications.com.

]]> Laverda RGS1000 Executive (1985) https://motorcyclespecifications.com/laverda-rgs1000-executive-1985-specs/ Sun, 02 Apr 2023 22:53:03 +0000 https://motorcyclespecifications.com/?p=42245 The Laverda RGS1000 Executive is a motorcycle that was produced in 1985. It has a transverse three-cylinder engine with a capacity of 981cc and a compression ratio of 8.8:1. It

The post Laverda RGS1000 Executive (1985) appeared first on MotorcycleSpecifications.com.

]]> The Laverda RGS1000 Executive is a motorcycle that was produced in 1985. It has a transverse three-cylinder engine with a capacity of 981cc and a compression ratio of 8.8:1. It uses three 32mm Dell’Orto carbs for induction and Borsch electronic ignition for starting. It has a maximum power of 83.3 hp at 8000 rpm and a maximum torque of 77.9 Nm at 7000 rpm. The transmission is five-speed, and the final drive is a chain.

The Laverda RGS1000 Executive has a front suspension that uses Marzocchi air-assisted forks and a rear suspension that has dual Marzocchi air-assisted forks with a 5-way spring preload. The front brakes consist of two 280mm discs with two-piston calipers, while the single 280mm disc with a one-piston caliper serves as the rear brakes. The wet weight of this motorcycle is 253 kg, and it has a fuel capacity of 22 litres or 5.8 US gallons.

In a 1985 Motosprint Group Test, the Laverda RGS1000 Executive was one of the motorcycles tested.

Technical specifications:

Make Model: Laverda RGS1000 Executive

Year: 1985
Engine: Four stroke, transverse three cylinder, DOHC, 2 valve per cylinder.
Capacity: 981 cc / 59.8 cu-in
Bore x Stroke: 75 x 74 mm
Cooling System: Air cooled
Compression Ratio: 8.8:1
Induction: 3x 32mm Dell’Orto carbs
Ignition: Borsch electronic
Starting: Electric
Max Power: 83.3 hp / 61.2 kW @ 8000 rpm
Max Torque: 77.9 Nm / 57.4 lb-ft @ 7000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Marzocchi air assisted forks
Rear Suspension: Dual Marzocchi air assisted forks, 5-way spring preload
Front Brakes: 100/90 -18
Rear Brakes: 120/90 -18
Front Tyre: 2x 280mm discs 2 piston calipers
Rear Tyre: Single 280mm disc 1 piston caliper
Wet Weight: 253 kg / 558 lbs
Fuel Capacity: 22 Litres / 5.8 US gal
Road Test: Group Test 1985 Motosprint

The post Laverda RGS1000 Executive (1985) appeared first on MotorcycleSpecifications.com.

]]> laverda 750SF (1971-73) https://motorcyclespecifications.com/laverda-750sf-1971-73-specs/ Sun, 02 Apr 2023 21:06:57 +0000 https://motorcyclespecifications.com/?p=42146 The Laverda 750SFC is a motorcycle produced from 1971 to 1973. It features a four-stroke, parallel twin-cylinder engine with 2 valves per cylinder and an air-cooled cooling system. The engine

The post laverda 750SF (1971-73) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 750SFC is a motorcycle produced from 1971 to 1973. It features a four-stroke, parallel twin-cylinder engine with 2 valves per cylinder and an air-cooled cooling system. The engine has a capacity of 744 cc and a maximum power output of 75 hp at 7400 rpm. This motorcycle has a 5-speed transmission and a final drive chain. It has front 38mm telescopic forks suspension and a dual Koni shocks preload shocks rear suspension. The front brakes consist of two 230mm drum brakes, while the rear brake is a 200mm drum brake. The front tire has a size of 3.50-18, and the rear tire has a size of 4.00-18. The wet weight is 231 kg, and the fuel tank has a capacity of 25 liters or 6.6 US gallons.

Technical specifications:

Make Model: Laverda 750SFC

Year: 1971 – 73
Engine: Four stroke, parallel twin cylinders, SOHC, 2 valve per cylinder
Capacity: 744 cc / 45.4 cu-in
Bore x Stroke: 80 x 74 mm
Cooling System: Air cooled
Compression Ratio: 10.5:1
Induction: 2x 36mm PHB Dell’Orto carburetors
Ignition: Bosch electronic
Starting: Electric
Max Power: 75 hp / 56 kW @ 7400 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 38mm Telescopic forks
Rear Suspension: Dual Koni shocks preload shocks
Front Brakes: 2X 230mm drum
Front Brakes: 230mm Drum
Rear Brakes: 200mm Drum
Front Tyre: 3.50-18
Rear Tyre: 4.00-18
Wet Weight: 231 kg / 509.3 lbs
Fuel Capacity: 25 Litres / 6.6 US gal

The post laverda 750SF (1971-73) appeared first on MotorcycleSpecifications.com.

]]> Laverda 500 Alpino S (1978) https://motorcyclespecifications.com/laverda-500-alpino-s-1978-specs/ Sun, 02 Apr 2023 20:49:14 +0000 https://motorcyclespecifications.com/?p=42128 The Laverda 500 Alpino S was a motorcycle released in 1978. It had a four-stroke parallel twin cylinder engine, with a capacity of 497 cc and air cooling. The bike

The post Laverda 500 Alpino S (1978) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 500 Alpino S was a motorcycle released in 1978. It had a four-stroke parallel twin cylinder engine, with a capacity of 497 cc and air cooling. The bike had a compression ratio of 8.6:1, and a maximum power of 44 hp at 9500 rpm. It used a 6-speed transmission and a chain for the final drive. The frame was made of steel and had telescopic front forks and adjustable shocks in the rear suspension. The front brakes had 2x 260mm discs and 2 piston calipers, while the rear brake had a single 260mm disc and a 1 piston caliper. The tires were 90/90-17 in the front and 110/90-18 in the rear. It weighed 175 kg dry and 189 kg wet, with a fuel capacity of 13.5 litres. The bike had a consumption average of 48 mpg, a standing 1/4 mile time of 14.5 seconds and could reach a top speed of 105 mph.

Technical specifications:

Make Model: Laverda 500 Alpino S

Year: 1978
Engine: Four stroke, parallel twin cylinders, DOHC, 4 valve per cylinder
Capacity: 497 cc / 30.2 cu-in
Bore x Stroke: 72 x 61 mm
Cooling System: Air cooled
Compression Ratio: 8.6:1
Induction: 2x 32mm Dell’Orto PHF carburetors
Ignition: Electric CDI
Starting: Electric
Max Power: 44 hp / 32.1 kW @ 9500 rpm
Max Torque: 44.7 Nm / 33 lb-ft @ 5200 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Steel loop
Front Suspension: Telescopic forks
Rear Suspension: Swinging forks, adjustable shocks
Front Brakes: 2x 260mm discs 2 piston calipers
Rear Brakes: Single 260mm disc 1 piston caliper
Front Tyre: 90/90-17
Rear Tyre: 110/90-18
Dry Weight: 175 kg / 385.8 lbs
Wet Weight: 189 kg / 416.7 lbs
Fuel Capacity: 13.5 Litres / 3.5 US gal
Consumption Average: 48 mpg
Standing 1/4 Mile: 14.5 sec
Top Speed: 105 mph

The post Laverda 500 Alpino S (1978) appeared first on MotorcycleSpecifications.com.

]]> Laverda 500 Zeta (1978) https://motorcyclespecifications.com/laverda-500-zeta-1978-specs/ Sun, 02 Apr 2023 19:10:57 +0000 https://motorcyclespecifications.com/?p=42036 The Laverda 500 Zeta motorcycle was produced in 1978 and is a four stroke, parallel twin cylinder, DOHC, with 4 valves per cylinder, 497 cc capacity, and air cooled. It

The post Laverda 500 Zeta (1978) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 500 Zeta motorcycle was produced in 1978 and is a four stroke, parallel twin cylinder, DOHC, with 4 valves per cylinder, 497 cc capacity, and air cooled. It has a compression ratio of 9.0:1, a 6 speed transmission, and a chain final drive. The motorcycle has a maximum power of 44 hp at 9500 rpm and 44.7 Nm of torque at 5200 rpm. Its suspension consists of Marzocchi forks in the front and a swinging arm fork with adjustable Marzocchi shock absorbers in the rear. It has 2x 260mm discs with 2 piston calipers in the front and a single 260mm disc with 1 piston caliper in the rear. The front and rear tires are 90/90 S18 and 110/90 H18, respectively. The dry weight of the motorcycle is 172 kg/379 lbs and its fuel capacity is 14.5 liters/3.8 US gal.

Technical specifications:

Make Model: Laverda 500 Zeta

Year: 1978
Engine: Four stroke, parallel twin cylinders, DOHC, 4 valve per cylinder
Capacity: 497 cc / 30.2 cu-in
Bore x Stroke: 72 x 61 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Induction: 2x 32mm Dell’Orto carburetors
Ignition: Electric CDI
Starting: Electric
Max Power: 44 hp / 32.1 kW @ 9500 rpm
Max Torque: 44.7 Nm / 33 lb-ft @ 5200 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Marzocchi forks
Rear Suspension: Swinging arm fork, adjustable Marzocchi shock absorbers.
Front Brakes: 2x 260mm discs 2 piston calipers
Rear Brakes: Single 260mm disc 1 piston caliper
Front Tyre: 90/90 S18
Rear Tyre: 110/90 H18
Dry Weight: 172 kg / 379 lbs
Fuel Capacity: 14.5 Litres / 3.8 US gal

The post Laverda 500 Zeta (1978) appeared first on MotorcycleSpecifications.com.

]]> Laverda Montjuic Mk1 (1979) https://motorcyclespecifications.com/laverda-montjuic-mk1-1979-specs/ Sun, 02 Apr 2023 17:03:04 +0000 https://motorcyclespecifications.com/?p=41914 The Laverda Montjuic Mk I motorcycle was produced in 1979 and featured a four-stroke, air-cooled parallel twin engine with a capacity of 497cc. The engine had a compression ratio of

The post Laverda Montjuic Mk1 (1979) appeared first on MotorcycleSpecifications.com.

]]> The Laverda Montjuic Mk I motorcycle was produced in 1979 and featured a four-stroke, air-cooled parallel twin engine with a capacity of 497cc. The engine had a compression ratio of 10.2:1 and was equipped with two 32mm Dell’Orto PHF carburetors and an electric CDI ignition system. The bike had a maximum power output of 58hp at 9500rpm and was capable of reaching a top speed of 113mph. The transmission was a 6-speed manual and the bike had a chain final drive. The front suspension consisted of Marzocchi forks with the rear suspension featuring Marzocchi shocks with 5-way spring preload adjustment. The front brakes were two 260mm discs, with a single 260mm disc on the rear. The bike had a fuel capacity of 11.5 litres (3.0 US gal) and achieved an average fuel consumption of 49mpg. In terms of performance, the Laverda Montjuic Mk I could complete the standing 1/4 mile in 13.4 seconds at 87.5 mph. Overall, the Laverda Montjuic Mk I was a highly capable motorcycle that offered impressive performance in a stylish package.

Technical specifications:

Make Model: Laverda Montjuic Mk I

Year: 1979
Engine: Four stroke, parallel twin cylinders, DOHC, 4 valve per cylinder
Capacity: 497 cc / 30.2 cu-in
Bore x Stroke: 72 x 61 mm
Cooling System: Air cooled
Compression Ratio: 10.2:1
Induction: 2x 32mm Dell’Orto PHF carburetors
Ignition: Electric CDI
Starting: Electric
Max Power: 58 hp / 43.2 kW @ 9500 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Marzocchi forks
Rear Suspension: Marzocchi shocks with 5-way spring preload adjustment.
Front Brakes: 2x 260mm discs
Rear Brakes: Single 260mm disc
Front Tyre: 3.00-18
Rear Tyre: 3.25-18
Dry Weight: NA
Fuel Capacity: 11.5 Litres / 3.0 US gal
Consumption average: 49 mpg
Standing 1/4 Mile: 13.4 sec / 87.5 mp/h
Top Speed: 113 mph

The post Laverda Montjuic Mk1 (1979) appeared first on MotorcycleSpecifications.com.

]]> Laverda 750 Black Strike (2000) https://motorcyclespecifications.com/laverda-750-black-strike-2000-specs/ Sun, 02 Apr 2023 16:45:58 +0000 https://motorcyclespecifications.com/?p=41899 The Laverda 750 Black Strike motorcycle was introduced in 2000 and is powered by a four-stroke, parallel twin, 747cc engine with a liquid cooling system and a compression ratio of

The post Laverda 750 Black Strike (2000) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 750 Black Strike motorcycle was introduced in 2000 and is powered by a four-stroke, parallel twin, 747cc engine with a liquid cooling system and a compression ratio of 11.5:1. It has a maximum power of 92 hp at 7500 rpm and a maximum torque of 82 Nm at 6500 rpm. The bike also features a six-speed transmission and a chain final drive.

The Black Strike has an aluminum twin-beam frame, Paioli Racing inverted adjustable preload front suspension, and a Paioli monoshock adjustable spring preload rear suspension. The front brakes consist of 2x 320mm discs with 4 piston calipers while the rear brakes are a single 245mm disc with 2 piston calipers. The front and rear tires are 120/60 ZR17 and 160/60 ZR17, respectively.

The seat height is 770 mm, and the dry weight of the bike is 189 kg with a fuel capacity of 19 litres. This motorcycle was a high-performance model from Laverda and featured twin Weber-Marelli electronic injection and ignition systems. It was a popular bike during its time and is remembered for its sleek design and impressive performance on the road.

Technical specifications:

Make Model: Laverda 750 Black Strike

Year: 2000
Engine: Four stroke, parallel twin. DOHC, 4 valve per cylinder.
Capacity: 747 cc / 45.6 cu-in
Bore x Stroke: 83 X 69 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Induction: Twin Weber-Marelli electronic injection
Ignition: Weber-Marelli electronic
Starting: Electric
Max power: 92 hp / 68.6 kW @ 7500 rpm
Max Torque: 82 Nm / 60.4 lb-ft @ 6500 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Aluminium twin beam
Front Suspension: Paioli Racing Inverted adjustable preload, rebound & compression damping
Rear Suspension: Paioli Monoshock adjustable spring preload, rebound & compression damping
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 245mm disc 2 piston caliper
Front Tyre: 120/60 ZR17
Rear Tyre: 160/60 ZR17
Seat Height: 770 mm / 30.3 in
Dry Weight: 189 kg /
Dry Weight: 189 kg / 416 lbs
Fuel Capacity (res): 19 Litres / 5.0 US gal

The post Laverda 750 Black Strike (2000) appeared first on MotorcycleSpecifications.com.

]]> Laverda 750GT “America Eagle” (1968-71) https://motorcyclespecifications.com/laverda-750gt-america-eagle-1968-71-specs/ Sun, 02 Apr 2023 16:17:58 +0000 https://motorcyclespecifications.com/?p=41874 The Laverda 750GT “America Eagle” (1968-71) is a four-stroke, parallel twin cylinder motorcycle with a capacity of 753.9 cc / 46.0 cu-in. It has a compression ratio of 7.7:1, uses

The post Laverda 750GT “America Eagle” (1968-71) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 750GT “America Eagle” (1968-71) is a four-stroke, parallel twin cylinder motorcycle with a capacity of 753.9 cc / 46.0 cu-in. It has a compression ratio of 7.7:1, uses 2x 30mm Dell’Orto vhb30 carburetors, and a Bosch ignition. The bike has a maximum power of 52 hp / 38 kW @ 6900 rpm and a 5-speed transmission with a chain final drive. The front suspension is composed of Marzocchi telescopic forks and the rear suspension is a swinging arm with dual shocks. The bike has single 230mm drum front brakes and 200mm drum rear brakes, with a front tyre size of 3.50-18 and rear tyre size of 4.00-18. The Laverda 750GT “America Eagle” weighs 218.0 kg / 480.6 lbs and has a fuel capacity of 19 litres / 5.0 US gal.

Technical specifications:

Make Model: Laverda 750GT “America Eagle”

Year: 1968 – 71
Engine: Four stroke, parallel twin cylinder.
Capacity: 753.9 cc / 46.0 cu-in
Bore x Stroke: 80 x 74 mm
Cooling System: Air cooled
Compression Ratio: 7.7:1
Induction: 2x 30mm Dell’Orto vhb30 carburetors
Ignition: Bosch
Starting:
Max Power: 52 hp / 38 kW @ 6900 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Marzocchi telescopic forks
Rear Suspension: Swinging arm dual shocks
Front Brakes: Single 230mm drum
Rear Brakes: 200mm Drum
Front Tyre: 3.50-18
Rear Tyre: 4.00-18
Wet Weight: 218.0 kg / 480.6 lbs
Fuel Capacity: 19 Litres / 5.0 US gal

The post Laverda 750GT “America Eagle” (1968-71) appeared first on MotorcycleSpecifications.com.

]]> Laverda 125LZ Ele (1981) https://motorcyclespecifications.com/laverda-125lz-ele-1981-specs/ Sun, 02 Apr 2023 11:13:03 +0000 https://motorcyclespecifications.com/?p=41590 The Laverda LZ 125 Elegant motorcycle was produced in 1981 with a two-stroke, liquid-cooled engine and a single cylinder that has a 124cc capacity. It uses a Mikuni VM28 carburetor

The post Laverda 125LZ Ele (1981) appeared first on MotorcycleSpecifications.com.

]]> The Laverda LZ 125 Elegant motorcycle was produced in 1981 with a two-stroke, liquid-cooled engine and a single cylinder that has a 124cc capacity. It uses a Mikuni VM28 carburetor and a Bosch MHKZ ignition system, with a maximum power of 17hp and 15.5Nm of torque at 7600 and 7400 RPM respectively. The bike has a 5-speed transmission and a chain final drive. It has 32mm Marzocchi forks for front suspension, and dual shocks for the rear suspension. The front brake is a single 260mm disc, while the rear brake is a 160mm drum. The tires for this motorcycle are 2.50-18 for the front and 3.00-18 for the rear. It has a dry weight of 108 kg and a fuel capacity of 13 liters or 3.4 US gallons.

Technical specifications:

Make Model: Laverda LZ 125 Elegant

Year: 1981
Engine: Two stroke, single cylinder,
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 54 x 54 mm
Cooling System: Liquid cooled
Induction: Mikuni VM28 carburetor
Ignition: Bosch MHKZ
Starting: Kick
Max Power: 17 hp / 12.5 kW @ 7600 RPM
Max Torque: 15.5 Nm / 11.5 lb-ft @ 7400 RPM
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 32 mm Marzocchi forks
Rear Suspension: Dual shocks
Front Brakes: Single 260mm disc
Rear Brakes: 160mm Drum
Front Tyre: 2,50-18
Rear Tyre: 3,00-18
Dry Weight: 108 kg / 238 lbs
Fuel Capacity: 13 Litres / 3.4 US gal

The post Laverda 125LZ Ele (1981) appeared first on MotorcycleSpecifications.com.

]]> Laverda LH-125 (1980) https://motorcyclespecifications.com/laverda-lh-125-1980-specs/ Sun, 02 Apr 2023 05:53:03 +0000 https://motorcyclespecifications.com/?p=41298 The Laverda LH-125 is a motorcycle model released in 1980. It features a two-stroke, single cylinder engine with a capacity of 124 cc and a compression ratio of 13.5:1. The

The post Laverda LH-125 (1980) appeared first on MotorcycleSpecifications.com.

]]> The Laverda LH-125 is a motorcycle model released in 1980. It features a two-stroke, single cylinder engine with a capacity of 124 cc and a compression ratio of 13.5:1. The engine is cooled by air and has an electronic ignition with a Dell’Orto premix carburetor. The motorcycle has a maximum power output of 23 hp at 9200 rpm and is equipped with a 6-speed transmission and chain final drive. The front suspension consists of Marzocchi forks while the rear suspension is a swinging fork with gas shocks. The brakes on both the front and rear are drum brakes. The motorcycle has 3.00-21 front tyres and 4.00-18 rear tyres, with a dry weight of 81.5 kg and a fuel capacity of 6.8 litres.

Technical specifications:

Make Model: Laverda LH125

Year: 1980
Engine: Two stroke, single cylinder
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 55 x 52 mm
Cooling System: Air cooled
Compression Ratio: 13.5:1
Induction: Dell’Orto premix carburetor
Ignition: Electronic
Starting: Kick
Max Power: 23 hp / 16.8 kW @ 9200 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Marzocchi forks
Rear Suspension: Swinging fork with gas shocks
Front Brakes: Drum
Rear Brakes: Drum
Front Tyre: 3.00-21
Rear Tyre: 4.00-18
Dry Weight: 81.5 kg / 179.6 lbs
Fuel Capacity: 6.8 Litres / 1.8 US gal

The post Laverda LH-125 (1980) appeared first on MotorcycleSpecifications.com.

]]> Laverda RGS1000 Jota (1985) https://motorcyclespecifications.com/laverda-rgs1000-jota-1985-specs/ Sun, 02 Apr 2023 05:21:04 +0000 https://motorcyclespecifications.com/?p=41268 The Laverda RGS1000 Jota (1985) is a motorcycle with a four-stroke, transverse three-cylinder engine, producing 981cc capacity and 83.3 hp power at 8000 rpm. The engine has DOHC with 2

The post Laverda RGS1000 Jota (1985) appeared first on MotorcycleSpecifications.com.

]]> The Laverda RGS1000 Jota (1985) is a motorcycle with a four-stroke, transverse three-cylinder engine, producing 981cc capacity and 83.3 hp power at 8000 rpm. The engine has DOHC with 2 valves per cylinder and the bike is air-cooled with a compression ratio of 8.8:1. The bike has 3x 32mm Dell’Orto carbs and Borsch electronic ignition. The starting system is electric, and the maximum torque is 77.9 Nm at 7000 rpm. The bike has a 5-speed transmission and a chain final drive. The front suspension is a Marzocchi air-assisted fork, while the rear suspension has dual Marzocchi air-assisted forks with a 5-way spring preload. The front brakes consist of 2x 280mm discs with 2-piston calipers, and the rear brake is a single 280mm disc with a 1-piston caliper. The bike has a wet weight of 253 kg and a fuel capacity of 22 litres (5.8 US gal). It has a beautiful classic design that gives a sporty feel. It was tested by Motosprint magazine in 1985 and received favorable reviews.

Technical specifications:

Make Model: Laverda RGS1000 Jota

Year: 1985
Engine: Four stroke, transverse three cylinder, DOHC, 2 valve per cylinder.
Capacity: 981 cc / 59.8 cu-in
Bore x Stroke: 75 x 74 mm
Cooling System: Air cooled
Compression Ratio: 8.8:1
Induction: 3x 32mm Dell’Orto carbs
Ignition: Borsch electronic
Starting: Electric
Max Power: 83.3 hp / 61.2 kW @ 8000 rpm
Max Torque: 77.9 Nm / 57.4 lb-ft @ 7000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Marzocchi air assisted forks
Rear Suspension: Dual Marzocchi air assisted forks, 5-way spring preload
Front Brakes: 100/90 -18
Rear Brakes: 120/90 -18
Front Tyre: 2x 280mm discs 2 piston calipers
Rear Tyre: Single 280mm disc 1 piston caliper
Wet Weight: 253 kg / 558 lbs
Fuel Capacity: 22 Litres / 5.8 US gal
Road Test: Group Test 1985 Motosprint

The post Laverda RGS1000 Jota (1985) appeared first on MotorcycleSpecifications.com.

]]> Laverda 668 Diamanta (1997) https://motorcyclespecifications.com/laverda-668-diamanta-1997-specs/ Sun, 02 Apr 2023 04:50:57 +0000 https://motorcyclespecifications.com/?p=41239 The Laverda 668 Diamante motorcycle was released in 1997 and featured a four-stroke, parallel twin-cylinder engine with a capacity of 668cc. It had a compression ratio of 9.0:1 and was

The post Laverda 668 Diamanta (1997) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 668 Diamante motorcycle was released in 1997 and featured a four-stroke, parallel twin-cylinder engine with a capacity of 668cc. It had a compression ratio of 9.0:1 and was cooled by air and oil. The bike had a maximum power output of 70hp at 8000rpm and max torque of 60Nm at 7000rpm. It was fitted with Twin Weber-Marelli electronic injection and ignition. The bike had a six-speed transmission and chain final drive. The front suspension was made up of 40mm WP upside-down forks while the rear suspension was WP rising rate adjustable preload. The bike had a front brake consisting of 2x 320mm discs 4 piston calipers and a rear brake with a single 245mm disc 2 piston caliper. The Laverda 668 Diamante had a dry weight of 180kg, a fuel capacity of 18 litres or 4.7 US gallons, and was equipped with 120/70 ZR17 front tires and 170/60 ZR17 rear tires.

Technical specifications:

Make Model: Laverda 668 Diamante

Year: 1997
Engine: Four stroke, parallel twin cylinder. DOHC, 4 valve per cylinder
Capacity: 668 cc / 40.7 cu-in
Bore x Stroke: 78.5 x 69 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.0:1
Induction: Twin Weber-Marelli electronic injection
Ignition: Weber-Marelli electronic
Starting: Electric
Max Power: 70 hp / 52 kW @ 8000 rpm
Max Power Rear Tyre: 65 hp / 48.4 kW @ 7800 rpm
Max Torque: 60 Nm / 44.2 lb-ft @ 7000 rpm
Transmission: 6 speed
Final Drive: Chain
Front Suspension: 40mm WP Upside-down forks, adjustable rebound and damping.
Rear Suspension: WP Rising rate adjustable preload, rebound and damping.
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 245mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 170/60 ZR17
Dry Weight: 180 kg / 396.8 lbs
Fuel Capacity: 18 Litres / 4.7 US gal

The post Laverda 668 Diamanta (1997) appeared first on MotorcycleSpecifications.com.

]]> Laverda 350 (1981) https://motorcyclespecifications.com/laverda-350-1981-specs/ Sat, 01 Apr 2023 20:47:16 +0000 https://motorcyclespecifications.com/?p=40792 The Laverda 350 motorcycle was released in 1981 with a four stroke, parallel twin cylinder engine, and had a 344.5cc capacity. It had a compression ratio of 8.7:1, an air

The post Laverda 350 (1981) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 350 motorcycle was released in 1981 with a four stroke, parallel twin cylinder engine, and had a 344.5cc capacity. It had a compression ratio of 8.7:1, an air cooling system, and was equipped with 2x 24mm PHF Dell’Orto carburetors and a Borsch electronic ignition system. The bike had an electric starter and could reach a max power and torque output. It had a 6-speed transmission, chain final drive, Marzocchi forks for the front suspension, and swinging arm fork with adjustable Marzocchi shock absorbers for the rear suspension. The front brakes consisted of 2x 260mm discs with 2 piston calipers, while the rear brake had a single 260mm disc with 1 piston caliper. The Laverda 350 had a front tire size of 90/90 S18 and a rear tire size of 110/90 H18. The dry weight of the motorcycle was 172 kg / 379 lbs and its fuel capacity was 14.5 liters / 3.8 US gal.

Technical specifications:

Make Model: Laverda 350

Year: 1981
Engine: Four stroke, parallel twin cylinders,
Capacity: 344.5 cc / 21 cu-in
Bore x Stroke: 60 x 61 mm
Compression Ratio: 8.7:1
Cooling System: Air cooled
Induction: 2x 24mm PHF Dell’Orto carburetors
Ignition: Borsch electronic
Starting: Electric
Max Power:
Max Torque:
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Marzocchi forks
Rear Suspension: Swinging arm fork, adjustable Marzocchi shock absorbers.
Front Brakes: 2x 260mm discs 2 piston calipers
Rear Brakes: Single 260mm disc 1 piston caliper
Front Tyre: 90/90 S18
Rear Tyre: 110/90 H18
Dry Weight: 172 kg / 379 lbs
Fuel Capacity: 14.5 Litres / 3.8 US gal

The post Laverda 350 (1981) appeared first on MotorcycleSpecifications.com.

]]> Laverda  1000 3C (1973 -74) https://motorcyclespecifications.com/laverda-1000-3c-1973-74-specs/ Sat, 01 Apr 2023 19:42:07 +0000 https://motorcyclespecifications.com/?p=40732 The Laverda 1000 3C is a classic motorcycle model from 1973-74 featuring a four-stroke, transverse three cylinder engine with a capacity of 980 cc/59.8 cu-in. It has a 9.0:1 compression

The post Laverda  1000 3C (1973 -74) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 1000 3C is a classic motorcycle model from 1973-74 featuring a four-stroke, transverse three cylinder engine with a capacity of 980 cc/59.8 cu-in. It has a 9.0:1 compression ratio, 3x 32mm Dell’Orto PHF carburetors, and Bosch electronic ignition. The motorcycle has a maximum power of 78 hp/56.9 kW @ 7250 rpm and maximum torque of 86 Nm/63.4 lb-ft @ 5000 rpm. The Laverda 1000 3C has a 5-speed transmission and a chain final drive. The motorcycle has a telescopic fork front suspension and a swinging fork rear suspension. It also includes drum front and rear brakes, a 3.25 H19 front tire, and a 4.00 H18 rear tire. With a dry weight of 214 kg/471.3 lbs and a fuel capacity of 20.5 liters/5.4 US gal, the Laverda 1000 3C has an average consumption of 40 mpg and a top speed of 123 mph.

Technical specifications:

Make Model: Laverda 1000 3C

Year: 1973 – 74
Engine: Four stroke, transverse three cylinder, DOHC, 2 valve per cylinder.
Capacity: 980 cc / 59.8 cu-in
Bore x Stroke: 75 x 74 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Induction: 3x 32mm Dell’Orto PHF carburetors
Ignition: Bosch electronic
Starting: Electric
Max power: 78 hp / 56.9 kW @ 7250 rpm
Max Torque: 86 Nm / 63.4 lb-ft @ 5000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Swinging fork
Front Brakes: Drum
Rear Brakes: Drum
Front Tyre: 3.25 H19
Rear Tyre: 4.00 H18
Dry Weight: 214 kg / 471.3 lbs
Fuel Capacity: 20.5 Litres / 5.4 US gal
Consumption Average: 40 mpg
Top Speed: 123 mph

The post Laverda  1000 3C (1973 -74) appeared first on MotorcycleSpecifications.com.

]]> Laverda  1000 3C (1975-76) https://motorcyclespecifications.com/laverda-1000-3c-1975-76-specs/ Sat, 01 Apr 2023 11:43:09 +0000 https://motorcyclespecifications.com/?p=40291 The Laverda 1000 3C motorcycle was produced in 1975-76 with a four stroke transverse three cylinder engine that had a capacity of 980cc. It was equipped with 3x 32mm Dell’Orto

The post Laverda  1000 3C (1975-76) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 1000 3C motorcycle was produced in 1975-76 with a four stroke transverse three cylinder engine that had a capacity of 980cc. It was equipped with 3x 32mm Dell’Orto PHF carburetors and a Bosch electronic ignition, and had a maximum power of 78hp at 7250 rpm and a maximum torque of 86 Nm at 5000 rpm. The motorcycle had a 5-speed transmission and a chain final drive. The front suspension was telescopic, while the rear suspension was a swinging fork. Front brakes consisted of 2x 280mm discs with 2 piston calipers, while the rear brake was a drum. The motorcycle weighed 214 kg and had a fuel capacity of 20.5 liters, with an average consumption of 40 mpg. The top speed of the Laverda 1000 3C was 123 mph.

Technical specifications:

Make Model: Laverda 1000 3C

Year: 1975 – 76
Engine: Four stroke, transverse three cylinder, DOHC, 2 valve per cylinder.
Capacity: 980 cc / 59.8 cu-in
Bore x Stroke: 75 x 74 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Induction: 3x 32mm Dell’Orto PHF carburetors
Ignition: Bosch electronic
Starting: Electric
Max power: 78 hp / 56.9 kW @ 7250 rpm
Max Torque: 86 Nm / 63.4 lb-ft @ 5000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Swinging fork
Front Brakes: 2x 280mm discs 2 piston calipers
Rear Brakes: Drum
Front Tyre: 3.25 H19
Rear Tyre: 4.00 H18
Dry Weight: 214 kg / 471.3 lbs
Fuel Capacity: 20.5 Litres / 5.4 US gal
Consumption Average: 40 mpg
Top Speed: 123 mph

The post Laverda  1000 3C (1975-76) appeared first on MotorcycleSpecifications.com.

]]> Laverda 750S (1969-70) https://motorcyclespecifications.com/laverda-750s-1969-70-specs/ Sat, 01 Apr 2023 02:08:53 +0000 https://motorcyclespecifications.com/?p=39756 The Laverda 750S was produced from 1969 to 1970 and featured a four-stroke, parallel twin-cylinder engine with a capacity of 744cc. It had a compression ratio of 9.5:1 and was

The post Laverda 750S (1969-70) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 750S was produced from 1969 to 1970 and featured a four-stroke, parallel twin-cylinder engine with a capacity of 744cc. It had a compression ratio of 9.5:1 and was cooled by air. The bike had a maximum power output of 60 hp (43.7 kW) at 6900 rpm thanks to its 2x 29mm Dell’Orto vhb30 carburetors. The 5-speed transmission delivered power to the chain final drive. The front suspension featured Marzocchi telescopic forks and the rear suspension had swinging arm dual shocks. The front and rear brakes were both drums, with the front being 230mm and the rear being 200mm in size. The Laverda 750S had a wet weight of 231 kg (509.3 lbs) and could hold 19 litres (5.0 US gal) of fuel.

Technical specifications:

Make Model: Laverda 750S

Year: 1969 – 70
Engine: Four stroke, parallel twin cylinders, SOHC, 2 valve per cylinder
Capacity: 744 cc / 45.4 cu-in
Bore x Stroke: 80 x 74 mm
Cooling System: Air cooled
Compression Ratio: 9.5:1
Induction: 2x 29mm Dell’Orto vhb30 carburetors
Ignition:
Starting: Electric
Max Power: 60 hp / 43.7 kW @ 6900 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Marzocchi telescopic forks
Rear Suspension: Swinging arm dual shocks
Front Brakes: 230mm Drum
Rear Brakes: 200mm Drum
Front Tyre: 3.50-18
Rear Tyre: 4.00-18
Wet Weight: 231 kg / 509.3 lbs
Fuel Capacity: 19 Litres / 5.0 US gal

The post Laverda 750S (1969-70) appeared first on MotorcycleSpecifications.com.

]]> Laverda  1000 Jarama (1978) https://motorcyclespecifications.com/laverda-1000-jarama-1978-specs/ Sat, 01 Apr 2023 00:34:56 +0000 https://motorcyclespecifications.com/?p=39670 The Laverda 1000 Jarama motorcycle was produced in 1978 and was equipped with a four-stroke, transverse three-cylinder engine, DOHC, with 2 valves per cylinder. Its capacity is 980 cc and

The post Laverda  1000 Jarama (1978) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 1000 Jarama motorcycle was produced in 1978 and was equipped with a four-stroke, transverse three-cylinder engine, DOHC, with 2 valves per cylinder. Its capacity is 980 cc and has a bore/stroke ratio of 75 x 74 mm. It is air-cooled, has a compression ratio of 9.0:1, and is powered by Bosch electronic ignition. The bike has a maximum power of 78 hp at 7250 rpm and a maximum torque of 86 Nm at 5000 rpm. It has a 5-speed transmission with a final drive of chain. The front suspension consists of telescopic forks and swinging fork as the rear suspension. The braking system features 2x 280mm discs with 2 piston calipers in the front and a single 280mm disc with a 1 piston caliper in the rear. The bike comes with 3.25 H19 front and 4.00 H18 rear tyres. The dry weight is 214 kg with a fuel capacity of 20.5 litres or 5.4 US gallons. Its average fuel consumption is 40 mpg, and it has a top speed of 198 km/h or 123 mph. The Laverda 1000 Jarama made its name in the 70s and stands as a classic icon in the biking world today.

Technical specifications:

Make Model: Laverda 1000 Jarama

Year: 1978
Engine: Four stroke, transverse three cylinder, DOHC, 2 valve per cylinder.
Capacity: 980 cc / 59.8 cu-in
Bore x Stroke: 75 x 74 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Induction: 3x 32mm Dell’Orto PHF carburetors
Ignition: Bosch electronic
Starting: Electric
Max power: 78 hp / 56.9 kW @ 7250 rpm
Max Torque: 86 Nm / 63.4 lb-ft @ 5000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Swinging fork
Front Brakes: 2x 280mm discs 2 piston calipers
Rear Brakes: Single 280mm disc 1 piston caliper
Front Tyre: 3.25 H19
Rear Tyre: 4.00 H18
Dry Weight: 214 kg / 471.3 lbs
Fuel Capacity: 20.5 Litres / 5.4 US gal
Consumption Average: 40 mpg
Top Speed: 198 km/h / 123 mph

The post Laverda  1000 Jarama (1978) appeared first on MotorcycleSpecifications.com.

]]> Laverda 650 Ghost (1995) https://motorcyclespecifications.com/laverda-650-ghost-1995-specs/ Fri, 31 Mar 2023 13:48:06 +0000 https://motorcyclespecifications.com/?p=39081 The Laverda 650 Ghost is a motorcycle model that was produced in 1995. It has a four-stroke, parallel twin-cylinder engine with a capacity of 668cc. The bike is air-cooled and

The post Laverda 650 Ghost (1995) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 650 Ghost is a motorcycle model that was produced in 1995. It has a four-stroke, parallel twin-cylinder engine with a capacity of 668cc. The bike is air-cooled and has a compression ratio of 9.0:1. Its induction system is powered by twin Weber-Marelli electronic injection, and it has a Weber-Marelli electronic ignition. The bike has a maximum power output of 70hp at 8000 rpm and a maximum torque of 60Nm at 7000 rpm. It has a six-speed transmission and a chain final drive. The front suspension is an inverted 41mm adjustable rebound and compression dampening, while the rear suspension is a monoshock adjustable spring preload, rebound, and compression dampening. The bike has 2x 320mm discs 4 piston caliper front brakes and a single 245mm disc 2 piston caliper rear brake. It has a seat height of 760mm and a wet weight of 202 kg. The fuel capacity is 16 litres, and the average consumption is 15.5 km/lit. The bike is capable of braking from 60-0 in 13.8 meters and from 100-0 in 39.6 meters. It can achieve a standing 1/4 mile in 12.4 seconds and has a top speed of 193.5 km/h. Manuals available for the bike include the 668 Sport Owners Manual, 668/Diamante parts manual legend, 650/Formula parts manual, 650/Formula parts manual legend, and 668 Strike/Ghost/Legend parts manual legend.

Technical specifications:

Make Model: Laverda 650 Ghost

Year: 1995
Engine: Four stroke, parallel twin cylinder. DOHC, 4 valve per cylinder
Capacity: 668 cc / 40.7 cu-in
Bore x Stroke: 78.5 x 69 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Induction: Twin Weber-Marelli electronic injection
Ignition: Weber-Marelli electronic
Starting: Electric
Max Power: 70 hp / 52 kW @ 8000 rpm
Max Power Rear Tyre: 65 hp / 48.4 kW @ 7800 rpm
Max Torque: 60 Nm / 44.2 lb-ft @ 7000 rpm
Transmission: 6 speed
Final Drive: Chain
Front Suspension: Inverted 41mm adjustable rebound and compression dampening
Rear Suspension: Monoshock adjustable spring preload, rebound and compression dampening
Front Brakes: 2x 320mm discs 4 piston caliper
Rear Brakes: Single 245mm disc 2 piston caliper
Front Tyre: 120/60-17
Rear Tyre: 160/60-17
Seat Height: 760 mm / 29.9 in
Wet-Weight: 202 kg / 445.3 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Consumption Average: 15.5 km/lit
Braking 60 – 0 / 100 – 0: 13.8 m / 39.6 m
Standing 1/4 Mile: 12.4 sec / 165.5 km/h
Top Speed: 193.5 km/h
Manuals: 668 Sport Owners Manual / 668/Diamante parts manual – legend / 650/Formula parts manual / 650/Formula parts manual – legend / 650/Formula parts manual – legend / 668 Strike/Ghost/Legend parts manual – legend

The post Laverda 650 Ghost (1995) appeared first on MotorcycleSpecifications.com.

]]> Laverda 250 2TR7 (1976) https://motorcyclespecifications.com/laverda-250-2tr7-1976-specs/ Fri, 31 Mar 2023 11:06:55 +0000 https://motorcyclespecifications.com/?p=38933 The Laverda 250 2TR7 is a motorcycle that was produced in 1976. It features a two-stroke, single-cylinder engine with a capacity of 247cc and a compression ratio of 10.0:1. The

The post Laverda 250 2TR7 (1976) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 250 2TR7 is a motorcycle that was produced in 1976. It features a two-stroke, single-cylinder engine with a capacity of 247cc and a compression ratio of 10.0:1. The bike has a 32mm Dell’Orto carburetor and Borsch electronic ignition, and is kicked to start.

It is capable of producing 30 horsepower at 7000 rpm, with a maximum torque output. The bike has a 5-speed transmission and final drive is via chain. The front suspension is equipped with Marzocchi forks, while the rear suspension is a single fork with gas shocks.

The front and rear brakes are 180mm drum brakes. The tyres are 3.00-21 at the front and 4.00-18 at the rear. The bike weighs 107.5 kg or 237 lbs dry, and has a fuel capacity of 9.1 litres or 2.4 US gallons.

Technical specifications:

Make Model: Laverda 250 2TR7

Year: 1976
Engine: Two stroke, single cylinder
Capacity: 247 cc / 15.2 cu-in
Bore x Stroke: 68 x 68 mm
Cooling System: Air cooled
Compression Ratio: 10.0:1
Induction: 32mm Dell’Orto carburetor
Ignition: Borsch electronic
Starting: Kick
Max Power: 30 hp @ 7000 rpm
Max Torque:
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Marzocchi forks
Rear Suspension: Singling fork with gas shocks
Front Brakes: 180mm Drum
Rear Brakes: 180mm Drum
Front Tyre: 3.00-21
Rear Tyre: 4.00-18
Dry Weight: 107.5 kg / 237 lbs
Fuel Capacity: 9.1 Litres / 2.4 US gal

The post Laverda 250 2TR7 (1976) appeared first on MotorcycleSpecifications.com.

]]> Laverda 750 Sport (1998) https://motorcyclespecifications.com/laverda-750-sport-1998-specs/ Fri, 31 Mar 2023 10:59:06 +0000 https://motorcyclespecifications.com/?p=38925 The Laverda 750S Sport is a motorcycle from 1998 that has a four-stroke, parallel twin engine with a capacity of 747cc. It has liquid cooling, twin Weber-Marelli electronic injection, and

The post Laverda 750 Sport (1998) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 750S Sport is a motorcycle from 1998 that has a four-stroke, parallel twin engine with a capacity of 747cc. It has liquid cooling, twin Weber-Marelli electronic injection, and a six-speed transmission. The bike’s frame is made of aluminum twin beams, and it has Paioli Racing Inverted adjustable preload, rebound, and compression damping front suspension, as well as a Paioli Monoshock adjustable spring preload, rebound, and compression damping rear suspension. The front brakes have 2x 320mm discs with 4 piston calipers, and the rear brake has a single 245mm disc with a 2 piston caliper. The bike has a seat height of 770mm, a dry weight of 185.0kg, and a fuel capacity of 16 liters. Its maximum power is 85 hp at 9200 rpm, and its maximum torque is 75 Nm at 7750 rpm. The Laverda 750S Sport has a top speed of 217.2 km/h and can reach a quarter-mile in 11.9 seconds at a speed of 180.8 km/h. Its average fuel consumption is 15.8 km/lit, and its braking distance from 60-0km/h and 100-0km/h is 13.7m and 39.4m, respectively.

Technical specifications:

Make Model: Laverda 750S Sport

Year: 1998
Engine: Four stroke, parallel twin. DOHC, 4 valve per cylinder.
Capacity: 747 cc / 45.6 cu-in
Bore x Stroke: 83 X 69 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Induction: Twin Weber-Marelli electronic injection
Ignition: Weber-Marelli electronic
Starting: Electric
Max power: 85 hp / 63.3 kW @ 9200 rpm
Max Power Rear Tyre: 81.6 hp / 60.8 kW @ 8100 rpm
Max Torque: 75 Nm / 55.3 lb-ft @ 7750 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Aluminium twin beam
Front Suspension: Paioli Racing Inverted adjustable preload, rebound & compression damping
Rear Suspension: Paioli Monoshock adjustable spring preload, rebound & compression damping
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 245mm disc 2 piston caliper
Front Tyre: 120/60 ZR17
Rear Tyre: 160/60 ZR17
Seat Height: 770 mm / 30.3 in
Dry Weight: 185.0 kg / 407.9 lbs
Wet Weight: 202 kg / 445 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Consumption Average: 15.8 km/lit
Braking 60 – 0 / 100 – 0: 13.7 m / 39.4 m
Standing 1/4 Mile: 11.9 sec / 180.8 km/h
Top Speed: 217.2 km/h

The post Laverda 750 Sport (1998) appeared first on MotorcycleSpecifications.com.

]]> Laverda SFC 750 (1974-76) https://motorcyclespecifications.com/laverda-sfc-750-1974-76-specs/ Fri, 31 Mar 2023 09:43:01 +0000 https://motorcyclespecifications.com/?p=38852 The Laverda SFC 750 is a motorcycle from 1974-76 with a four stroke, parallel twin-cylinder, SOHC, 2 valve per cylinder engine with a capacity of 744cc. It has 2x 36mm

The post Laverda SFC 750 (1974-76) appeared first on MotorcycleSpecifications.com.

]]> The Laverda SFC 750 is a motorcycle from 1974-76 with a four stroke, parallel twin-cylinder, SOHC, 2 valve per cylinder engine with a capacity of 744cc. It has 2x 36mm PHB Dell’Orto carburettors, Bosch electronic ignition, and can generate 75hp / 56kW @ 7400 rpm. The bike has a 5-speed transmission with final drive chain. The suspension system consists of 38mm telescopic forks in the front, while the rear has dual Koni shocks with preload shocks. The SFC 750 has front brakes with 2x 280mm discs with 2 piston calipers and a single 280mm discs 2 piston caliper in the rear. Its front and rear tyre sizes are 110/90-18 and 120/90-18, respectively. With a wet weight of 231 kg / 509.3 lbs, the SFC 750 has a fuel capacity of 25 litres.

Technical specifications:

Make Model: Laverda 750SFC

Year: 1974-76
Engine: Four stroke, parallel twin cylinders, SOHC, 2 valve per cylinder
Capacity: 744 cc / 45.4 cu-in
Bore x Stroke: 80 x 74 mm
Cooling System: Air cooled
Compression Ratio: 10.5:1
Induction: 2x 36mm PHB Dell’Orto carburetors
Ignition: Bosch electronic
Starting: Electric
Max Power: 75 hp / 56 kW @ 7400 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 38mm Telescopic forks
Rear Suspension: Dual Koni shocks preload shocks
Front Brakes: 2x 280mm discs 2 piston calipers
Rear Brakes: Single 280mm discs 2 piston caliper
Front Tyre: 110/90-18
Rear Tyre: 120/90-18
Wet Weight: 231 kg / 509.3 lbs
Fuel Capacity: 25 Litres

The post Laverda SFC 750 (1974-76) appeared first on MotorcycleSpecifications.com.

]]> Laverda LB 125 Sport (1985) https://motorcyclespecifications.com/laverda-lb-125-sport-1985-specs/ Fri, 31 Mar 2023 01:05:54 +0000 https://motorcyclespecifications.com/?p=38377 The Laverda LB 125 Sport is a motorcycle that was produced in the year 1985. It is equipped with a two-stroke, single cylinder engine with a capacity of 124 cc.

The post Laverda LB 125 Sport (1985) appeared first on MotorcycleSpecifications.com.

]]> The Laverda LB 125 Sport is a motorcycle that was produced in the year 1985. It is equipped with a two-stroke, single cylinder engine with a capacity of 124 cc. The engine features a bore x stroke size of 64 x 51mm and a liquid cooling system. Its compression ratio is 14.0:1 and it is powered by a Dell’Orto premix carburetor with CDI ignition. The motorcycle has a kick start and can deliver a maximum power of 23 horsepower at 9200 rpm. It runs on a 7-speed transmission system and has a chain final drive.

The front suspension is designed with telescopic forks, while the rear suspension features an alloy swing arm and a single shock with adjustable damping. The front brakes consist of two 260mm discs and 2 piston calipers, while the rear brake is a single 160mm drum. The Laverda LB 125 Sport rides on a 100/80-16 front tyre and a 130/70-17 rear tyre. It has a dry weight of 129 kg and a fuel capacity of 14 litres.

Technical specifications:

Make Model: Laverda LB 125 Sport

Year: 1985
Engine: Two stroke, single cylinder
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 64 x 51mm
Cooling System: Liquid cooled
Compression Ratio: 14.0:1
Induction: Dell’Orto premix carburetor
Ignition: CDI
Starting: Kick
Max Power: 23 hp / 16.8 kW @ 9200 rpm
Transmission / Drive: 7 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Alloy swing arm, single shock with adjustable damping.
Front Brakes: 2x 260mm discs 2 piston calipers
Rear Brakes: Single 160mm drum
Front Tyre: 100/80-16
Rear Tyre: 130/70-17
Dry Weight: 129 kg / 284 lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post Laverda LB 125 Sport (1985) appeared first on MotorcycleSpecifications.com.

]]> Laverda LB1 Trofeo (1986) https://motorcyclespecifications.com/laverda-lb1-trofeo-1986-specs/ Thu, 30 Mar 2023 20:16:53 +0000 https://motorcyclespecifications.com/?p=38104 The Laverda LB1 Trofeo motorcycle was produced in 1986 and features a two stroke, single cylinder engine with a capacity of 124cc. The bike has a liquid cooling system and

The post Laverda LB1 Trofeo (1986) appeared first on MotorcycleSpecifications.com.

]]> The Laverda LB1 Trofeo motorcycle was produced in 1986 and features a two stroke, single cylinder engine with a capacity of 124cc. The bike has a liquid cooling system and a compression ratio of 14.0:1. It uses a Dell’Orto premix carburetor for induction and has CDI ignition. The max power is 23hp at 9200rpm and it has a 7-speed transmission with chain final drive. The front suspension has telescopic forks and the rear suspension is an alloy swing arm with a single shock that has adjustable damping. The front brakes have 2x 260mm discs and 2 piston calipers, while the rear brake is a single 160mm drum. The bike has a front tyre size of 100/80-16 and a rear tyre size of 130/70-17. The dry weight of the LB1 Trofeo is 129kg and it has a fuel capacity of 14 litres.

Technical specifications:

Make Model: Laverda LB 125 Trofeo

Year: 1986
Engine: Two stroke, single cylinder
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 64 x 51mm
Cooling System: Liquid cooled
Compression Ratio: 14.0:1
Induction: Dell’Orto premix carburetor
Ignition: CDI
Starting: Kick
Max Power: 23 hp / 16.8 kW @ 9200 rpm
Transmission / Drive: 7 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Alloy swing arm, single shock with adjustable damping.
Front Brakes: 2x 260mm discs 2 piston calipers
Rear Brakes: Single 160mm drum
Front Tyre: 100/80-16
Rear Tyre: 130/70-17
Dry Weight: 129 kg / 284 lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post Laverda LB1 Trofeo (1986) appeared first on MotorcycleSpecifications.com.

]]> Laverda GS125 (1985-87) https://motorcyclespecifications.com/laverda-gs125-1985-87-specs/ Thu, 30 Mar 2023 18:47:01 +0000 https://motorcyclespecifications.com/?p=38021 The Laverda GS 125 Lesmo was manufactured from 1985-87 and features a two-stroke, single cylinder engine with a 124cc capacity and a compression ratio of 14.0:1. Its Dell’Orto premix carburetor

The post Laverda GS125 (1985-87) appeared first on MotorcycleSpecifications.com.

]]> The Laverda GS 125 Lesmo was manufactured from 1985-87 and features a two-stroke, single cylinder engine with a 124cc capacity and a compression ratio of 14.0:1. Its Dell’Orto premix carburetor provides induction and it has a CDI ignition system, with a kick start. Its hydraulic Marzocchi telescopic forks and alloy swing arm with single shock and adjustable damping provide a smooth ride. Brake systems include 2x 240mm discs with 2 piston calipers in the front and a single 240mm disk in the rear, while the tyres are 100/90-H 16 in the front and 110/80-H 18 in the rear. The bike is 2055mm in length, 710mm in width, and 1190mm in height, with a dry weight of 130kg and 14-liter fuel capacity.

Technical specifications:

Make Model: Laverda GS 125 Lesmo

Year: 1985 – 87
Engine: Two stroke, single cylinder
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 54 x 54 mm
Cooling System: Liquid cooled
Compression Ratio: 14.0:1
Induction: Dell’Orto premix carburetor
Ignition: CDI
Starting: Kick
Max Power: 23 hp / 16.8 kW @ 9200 rpm
Clutch: Wet multiplate
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Hydraulic Marzocchi telescopic forks
Rear Suspension: Alloy swing arm, single shock with adjustable damping.
Front Brakes: 2x 240mm discs, 2 piston calipers
Rear Brakes: Single 240mm disk
Front Tyre: 100/90-H 16
Rear Tyre: 110/80-H 18
Dimensions: Length 2055 mm / 80.9 in Width 710 mm / 27.9 in Height 1190 mm / 46.8 in
Dry Weight: 130 kg / 286.6 lbs
Fuel Capacity: 14 Litres / 3.7 US gal
Related Links: 125stradali.com

The post Laverda GS125 (1985-87) appeared first on MotorcycleSpecifications.com.

]]> Laverda 125 Navarro (1990) https://motorcyclespecifications.com/laverda-125-navarro-1990-specs/ Thu, 30 Mar 2023 17:13:04 +0000 https://motorcyclespecifications.com/?p=37931 The Laverda 125 Navarro is a two-stroke, single cylinder motorcycle with a capacity of 124 cc and a compression ratio of 14.0:1. It features a Dell’Orto premix carburetor for induction

The post Laverda 125 Navarro (1990) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 125 Navarro is a two-stroke, single cylinder motorcycle with a capacity of 124 cc and a compression ratio of 14.0:1. It features a Dell’Orto premix carburetor for induction and CDI for ignition, with a maximum power of 23 hp at 9200 rpm. The bike has a 7-speed transmission and uses a chain for the final drive. It has a liquid cooled engine and weighs 129 kg with a fuel capacity of 14 liters. The front suspension consists of telescopic forks and the rear suspension has an alloy swing arm with single shock and adjustable damping. The front brakes have two 260mm discs and 2 piston calipers, while the rear brake uses a single 160mm drum. The front and rear tires are 100/80-16 and 130/70-17, respectively. The Laverda 125 Navarro was produced in 1990 and can be found on the website 125stradali.com.

Technical specifications:

Make Model: Laverda 125 Navarro

Year: 1990
Engine: Two stroke, single cylinder
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 64 x 51mm
Cooling System: Liquid cooled
Compression Ratio: 14.0:1
Induction: Dell’Orto premix carburetor
Ignition: CDI
Starting: Kick
Max Power: 23 hp / 16.8 kW @ 9200 rpm
Transmission / Drive: 7 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Alloy swing arm, single shock with adjustable damping.
Front Brakes: 2x 260mm discs 2 piston calipers
Rear Brakes: Single 160mm drum
Front Tyre: 100/80-16
Rear Tyre: 130/70-17
Dry Weight: 129 kg / 284 lbs
Fuel Capacity: 14 Litres / 3.7 US gal
Related Links: 125stradali.com

The post Laverda 125 Navarro (1990) appeared first on MotorcycleSpecifications.com.

]]> Laverda 650 Prototype (1967) https://motorcyclespecifications.com/laverda-650-prototype-1967-specs/ Thu, 30 Mar 2023 10:06:08 +0000 https://motorcyclespecifications.com/?p=37537 The Laverda 650 Prototype motorcycle was introduced in 1967 and featured a four-stroke, parallel twin-cylinder engine with a capacity of 653. The bike had a compression ratio of 9.0:1 and

The post Laverda 650 Prototype (1967) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 650 Prototype motorcycle was introduced in 1967 and featured a four-stroke, parallel twin-cylinder engine with a capacity of 653. The bike had a compression ratio of 9.0:1 and was fitted with 2x 28mm Dell’Orto carburetors. It had a kick start and a transmission with five speeds. The front suspension was Marzocchi telescopic forks while the rear suspension was a swinging arm dual shocks. The bike had front brakes with 2x 180mm drums and a rear drum brake. The wet weight of the bike was 218 kg, and it had a fuel capacity of unspecified size. The Laverda 650 Prototype was an early version of the Laverda model line and was later refined and improved upon in subsequent years. Users can find various parts manuals for the model online.

Technical specifications:

Make Model: Laverda 650 Prototype

Year: 1967
Engine: Four stroke, parallel twin cylinder.
Capacity: 653
Bore x Stroke: 75 x 74 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Induction: 2x 28mm Dell’Orto carburetors
Starting: Kick
Max Power:
Max Torque:
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Marzocchi telescopic forks
Rear Suspension: Swinging arm dual shocks
Front Brakes: 2x 180mm drum
Rear Brakes: Drum
Front Tyre: 3.50-18
Rear Tyre: 4.00-18
Wet Weight: 218 kg
Fuel Capacity:
Manuals: 668/Diamante parts manual – legend / – legend / 650/Formula parts manual – legend / 650/Formula parts manual – legend / 668 Strike/Ghost/Legend parts manual – legend

The post Laverda 650 Prototype (1967) appeared first on MotorcycleSpecifications.com.

]]> Laverda Jota 1000 Special (1983) https://motorcyclespecifications.com/laverda-jota-1000-special-1983-specs/ Thu, 30 Mar 2023 06:44:01 +0000 https://motorcyclespecifications.com/?p=37344 The Laverda Jota 1000 Special is a motorcycle from 1983 with a transverse three cylinder engine that has a capacity of 981 cc. It has a compression ratio of 8.8:1

The post Laverda Jota 1000 Special (1983) appeared first on MotorcycleSpecifications.com.

]]> The Laverda Jota 1000 Special is a motorcycle from 1983 with a transverse three cylinder engine that has a capacity of 981 cc. It has a compression ratio of 8.8:1 and is cooled by air. The bike has 3x 32mm Dell’Orto carbs for induction and Borsch electronic ignition. It can reach a maximum power of 97 hp at 7800 rpm and a torque of 90 Nm at 7000 rpm. The transmission has 5 speeds and the final drive is a chain. The bike has front coil springs and dual shock absorbers with 5-way adjustable coil springs in the rear. The front brakes consist of 2x 280mm discs and 2 piston calipers, while the rear brake has a single 280mm disc and 1 piston caliper. Its front tyre is 100/90-18 and the rear tyre is 120/90-18. The wet weight of the bike is 250 kg and it has a fuel capacity of 20 litres. It has an average consumption of 30 mpg and a top speed of 217 km/h. In a road test, the Laverda Jota 1000 Special achieved a standing 1/4 mile in 12.3 seconds and a top speed of 135 mph.

Technical specifications:

Make Model: Laverda Jota 1000 Special

Year: 1983
Engine: Four stroke, transverse three cylinder, DOHC, 2 valve per cylinder.
Capacity: 981 cc / 59.8 cu-in
Bore x Stroke: 75 x 74 mm
Cooling System: Air cooled
Compression Ratio: 8.8:1
Induction: 3x 32mm Dell’Orto carbs
Ignition: Borsch electronic
Starting: Electric
Max power: 97 hp / 70.7 kW @ 7800 rpm
Max Torque: 90 Nm / 66.3 lb-ft @ 7000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Coils springs
Rear Suspension: Dual shock absorbers, 5-way adjustable coil springs
Front Brakes: 2x 280mm discs 2 piston calipers
Rear Brakes: Single 280mm disc 1 piston caliper
Front Tyre: 100/90-18
Rear Tyre: 120/90-18
Wet Weight: 250 kg / 551 lbs
Fuel Capacity: 20 Litres / 5.4 US gal
Consumption average: 30 mpg
Standing 1/4 Mile: 12.3 sec / 110 mph
Top Speed: 217 km/h / 135 mph
Road Test: Bike Group Test

The post Laverda Jota 1000 Special (1983) appeared first on MotorcycleSpecifications.com.

]]> Laverda 350GS Lesmo (1985) https://motorcyclespecifications.com/laverda-350gs-lesmo-1985-specs/ Thu, 30 Mar 2023 05:31:57 +0000 https://motorcyclespecifications.com/?p=37276 The Laverda 350GS Lesmo is a motorcycle produced in 1985 with a four-stroke, 90-degree V twin-cylinder engine with a capacity of 349 cc. The engine has a bore x stroke

The post Laverda 350GS Lesmo (1985) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 350GS Lesmo is a motorcycle produced in 1985 with a four-stroke, 90-degree V twin-cylinder engine with a capacity of 349 cc. The engine has a bore x stroke of 52.4 x 54 mm and is air-cooled with Dell’Orto 26mm induction and Borsch electronic ignition. The motorcycle has an electric starting feature and can produce 57 hp / 42.5 kW @ 9200 rpm. The transmission is a six-speed with a final drive of the chain. The front suspension consists of Marzocchi forks, while the rear suspension comprises of swinging arm forks with adjustable Marzocchi shock. The front brakes have two 260mm discs with two piston calipers, and the rear brake has a single 260mm disc with a one-piston caliper. The tyre size for the front is 120/90 S16, whereas the rear is 130/90 H18. The Laverda 350GS Lesmo has a dry weight of 172 kg / 379 lbs and a fuel capacity of14.5 Litres / 3.8 US gal.

Technical specifications:

Make Model: Laverda 350GS Lesmo

Year: 1985
Engine: Four stroke, 90 degrees V twin cylinders
Capacity: 349 cc / 21.2 cu-in
Bore x Stroke: 52.4 x 54 mm
Cooling System: Air cooled
Induction: Dell’Orto 26mm
Ignition: Borsch electronic
Starting: Electric
Max Power: 57 hp / 42.5 kW @ 9200 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Marzocchi forks
Rear Suspension: Swinging arm fork, adjustable Marzocchi shock
Front Brakes: 2x 260mm discs 2 piston calipers
Rear Brakes: Single 260mm disc 1 piston caliper
Front Tyre: 120/90 S16
Rear Tyre: 130/90 H18
Dry Weight: 172 kg / 379 lbs
Fuel Capacity: 14.5 Litres / 3.8 US gal

The post Laverda 350GS Lesmo (1985) appeared first on MotorcycleSpecifications.com.

]]> Laverda OR600 Atlas (1988-89) https://motorcyclespecifications.com/laverda-or600-atlas-1988-89-specs/ Thu, 30 Mar 2023 05:07:56 +0000 https://motorcyclespecifications.com/?p=37252 The Laverda OR600 Atlas motorcycle was produced between 1988-89 and features a four stroke, parallel twin cylinder engine with DOHC and 4 valves per cylinder, using a Dell’Orto twin choke

The post Laverda OR600 Atlas (1988-89) appeared first on MotorcycleSpecifications.com.

]]> The Laverda OR600 Atlas motorcycle was produced between 1988-89 and features a four stroke, parallel twin cylinder engine with DOHC and 4 valves per cylinder, using a Dell’Orto twin choke induction and Bosch electronic ignition. It has a capacity of 571.6 cc, bore x stroke of 76 x 63 mm, and a compression ratio of 9.1:1. The motorcycle delivers a maximum power of 50 hp / 36.4 kW @ 7500 rpm and maximum torque of 50 Nm / 36.8 lb-ft @ 4800 rpm, using a six-speed transmission and chain final drive. The front suspension features air assisted telescopic forks, while the rear suspension is a single shock. It has a single 260mm disc with 2-piston calliper front brake and a single 230mm disc with 1-piston calliper rear brake. The front tyre size is 90/90-21 and the rear tyre size is 130/80-17. The dry weight of the motorcycle is 151 kg and the fuel capacity is 25 litres / 6.6 US gal.

Technical specifications:

Make Model: Laverda OR600 Atlas

Year: 1988 – 89
Engine: Four stroke, parallel twin cylinders, DOHC, 4 valve per cylinder, 180 degrees crankshaft.
Capacity: 571.6 cc / 34.8 cu-in
Bore x Stroke: 76 x 63 mm
Compression Ratio: 9.1:1
Induction: Dell’Orto twin choke
Ignition: Bosch electronic
Starting: Electric
Max Power: 50 hp / 36.4 kW @ 7500 rpm
Max Torque: 50 Nm / 36.8 lb-ft @ 4800 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Air assisted telescopic forks
Rear Suspension: Single shock
Front Brakes: Single 260mm disc 2piston calliper
Rear Brakes: Single 230mm disc 1 piston calliper
Front Tyre: 90/90-21
Rear Tyre: 130/80-17
Dry Weight: 151 kg
Fuel Capacity: 25 Litres / 6.6 US gal

The post Laverda OR600 Atlas (1988-89) appeared first on MotorcycleSpecifications.com.

]]> Laverda  1000 3C (1977-78) https://motorcyclespecifications.com/laverda-1000-3c-1977-78-specs/ Thu, 30 Mar 2023 02:57:56 +0000 https://motorcyclespecifications.com/?p=37129 The Laverda 1000 3C motorcycle was produced from 1977 to 1978 with a four stroke, transverse three cylinder, and DOHC engine. It had a capacity of 980 cc and a

The post Laverda  1000 3C (1977-78) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 1000 3C motorcycle was produced from 1977 to 1978 with a four stroke, transverse three cylinder, and DOHC engine. It had a capacity of 980 cc and a compression ratio of 9.0:1. The bike was equipped with 3x 32mm Dell’Orto PHF carburetors and a Bosch electronic ignition system. It had a maximum power of 78 hp and maximum torque of 86 Nm. The motorcycle had a 5-speed transmission and chain final drive. The suspension consisted of telescopic forks at the front and a swinging fork at the rear. Braking was provided by 2x 280mm discs with 2 piston calipers at the front and a single 280mm disc with a 1 piston caliper at the rear. The front and rear tires were 3.25 H19 and 4.00 H18, respectively. It weighed 214 kg with a fuel capacity of 20.5 Litres/5.4 US gal. The average consumption was 40 mpg, and it had a top speed of 198 km/h or 123 mph.

Technical specifications:

Make Model: Laverda 1000 3C

Year: 1977 – 78
Engine: Four stroke, transverse three cylinder, DOHC, 2 valve per cylinder.
Capacity: 980 cc / 59.8 cu-in
Bore x Stroke: 75 x 74 mm
Cooling System: Air cooled
Compression Ratio: 9.0:1
Induction: 3x 32mm Dell’Orto PHF carburetors
Ignition: Bosch electronic
Starting: Electric
Max power: 78 hp / 56.9 kW @ 7250 rpm
Max Torque: 86 Nm / 63.4 lb-ft @ 5000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Swinging fork
Front Brakes: 2x 280mm discs 2 piston calipers
Rear Brakes: Single 280mm disc 1 piston caliper
Front Tyre: 3.25 H19
Rear Tyre: 4.00 H18
Dry Weight: 214 kg / 471.3 lbs
Fuel Capacity: 20.5 Litres / 5.4 US gal
Consumption Average: 40 mpg
Top Speed: 198 km/h / 123 mph

The post Laverda  1000 3C (1977-78) appeared first on MotorcycleSpecifications.com.

]]> Laverda SF1 750 (1973) https://motorcyclespecifications.com/laverda-sf1-750-1973-specs/ Thu, 30 Mar 2023 02:26:00 +0000 https://motorcyclespecifications.com/?p=37097 The Laverda 750 SF1 motorcycle was produced in 1973 and features a four-stroke parallel twin-cylinder engine with a capacity of 744cc. The bike has a compression ratio of 8.9:1 and

The post Laverda SF1 750 (1973) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 750 SF1 motorcycle was produced in 1973 and features a four-stroke parallel twin-cylinder engine with a capacity of 744cc. The bike has a compression ratio of 8.9:1 and is cooled by air. It is equipped with 2x 36mm Dell’Orto PHF carburetors and Bosch electronic ignition, which allows for an electric start. At its peak, the Laverda 750 SF1 has a maximum power of 65 horsepower at 7300 rpm. The bike has a wet plate clutch with a five-speed transmission, and the final drive is through a chain. For suspension, the front has Ceriani telescopic forks, while the rear has a swinging fork with Ceriani adjustable shocks. Braking is managed by 2X 230mm drums at the front and a 200mm drum at the rear. The bike has a rake of 28.0 degrees and a trail of 82mm/3.2in, with a wheelbase of 1452mm/57.2in and a seat height of 790mm/31.1in. The dry weight of the bike is 215kg/474lbs, with a fuel capacity of 19 litres/5.0 US Gal. Overall, the Laverda 750 SF1 is a powerful and reliable motorcycle that continues to be popular among enthusiasts today.

Technical specifications:

Make Model: Laverda 750 SF1

Year: 1973
Engine: Four stroke, parallel twin cylinders, SOHC, 2 valve per cylinder
Capacity: 744 cc / 45.4 cu-in
Bore x Stroke: 80 x 74 mm
Cooling System: Air cooled
Compression Ratio: 8.9:1
Induction: 2x 36mm Dell’Orto PHF carburetors
Ignition: Bosch electronic
Starting: Electric
Max Power: 65 hp / 47.4 kW @ 7300 rpm
Clutch: wet plate
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Ceriani telescopic forks
Rear Suspension: Swinging fork, Ceriani adjustable shocks
Front Brakes: 2X 230mm drum
Rear Brakes: 200mm drum
Front Tyre: 3.50-18
Rear Tyre: 4.0-18
Rake: 28.0 degrees
Trail: 82 mm / 3.2 in
Wheelbase: 1452 mm / 57.2 in
Seat Height: 790 mm / 31.1 in
Dry Weight: 215 kg / 474 lbs
Fuel Capacity: 19 Litres / 5.0 US gal

The post Laverda SF1 750 (1973) appeared first on MotorcycleSpecifications.com.

]]> Laverda SFC 1000 Prototype (2003) https://motorcyclespecifications.com/laverda-sfc-1000-prototype-2003-specs/ Wed, 29 Mar 2023 21:29:55 +0000 https://motorcyclespecifications.com/?p=36818 The Laverda SFC 1000 Prototype was a motorcycle produced in 2003, boasting a four-stroke, 60 degree V-twin engine with a displacement of 997.6cc. It had a liquid cooling system, multi-point

The post Laverda SFC 1000 Prototype (2003) appeared first on MotorcycleSpecifications.com.

]]> The Laverda SFC 1000 Prototype was a motorcycle produced in 2003, boasting a four-stroke, 60 degree V-twin engine with a displacement of 997.6cc. It had a liquid cooling system, multi-point electronic fuel injection, and a digital electronic ignition. The engine had a maximum power output of 98kW and a maximum torque of 105Nm. The six-speed transmission was driven by a chain. The bike’s front suspension was equipped with a 43mm Ohlins titanium nitride coated upside-down fork with an external adjustment system for rebound, compression, and preload. The rear suspension featured an aluminum alloy swing-arm with an Ohlins Racing hydraulic monoshock offering adjustable rebound, compression, and preload, with 135mm wheel travel. The front brakes comprised of two 320mm discs with four-piston calipers while the rear brakes were a single 220mm disc with a two-piston caliper. The motorcycle was fitted with a 120/70 ZR 17 front tyre and a 190/50 ZR 17 rear tyre.

Technical specifications:

Make Model: Laverda SFC 1000 Prototype

Year: 2003
Engine: Four stroke, Longitudinal 60 degrees V twin, DOHC, 4 valves per cylinder.
Capacity: 997.6 cc /
Bore x Stroke: 97 x 67.5 mm
Cooling System: Liquid cooling
Compression Ratio: 11.8:1
Induction: Multi-point electronic injection. 57 mm diameter throttle bodies.
Ignition: Integrated engine management system with digital electronic ignition
Starting: Electric
Max power: 98 kW / 133 hp @ 9500 rpm
Max Torque: 105 Nm / 77.4 lb-ft @ 7500 rpm
Transmission / Drive: 6 Speed
Final Drive: Chain
Front Suspension: 43 mm ~Ahlins titanium nitride coated upside-down fork. 120 mm wheel travel. External adjustment system for rebound, compression and preload.
Rear Suspension: Aluminium alloy swing-arm: ~Ahlins Racing hydraulic monoshock with piggy-back cylinder installed on the left hand side of the swinging arm, rebound, compression, preload adjustable, 135mm wheel travel
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 220mm disc 2 piston caliper
Front Tyre: 120/70 ZR 17
Rear Tyre: 190/50 ZR 17

The post Laverda SFC 1000 Prototype (2003) appeared first on MotorcycleSpecifications.com.

]]> Laverda SF1 750 (1972) https://motorcyclespecifications.com/laverda-sf1-750-1972-specs/ Wed, 29 Mar 2023 16:21:57 +0000 https://motorcyclespecifications.com/?p=36531 The Laverda 750 SF1 motorcycle was first produced in 1972 with a four stroke, parallel twin cylinder, 744cc capacity engine, featuring Dell’Orto PHF carburetors and a Bosch electronic ignition. It

The post Laverda SF1 750 (1972) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 750 SF1 motorcycle was first produced in 1972 with a four stroke, parallel twin cylinder, 744cc capacity engine, featuring Dell’Orto PHF carburetors and a Bosch electronic ignition. It had a compression ratio of 8.9:1 and was air-cooled, with a maximum power of 65hp at 7300rpm. The transmission had five speeds and the final drive was through a chain. The front suspension consisted of Ceriani telescopic forks with swinging fork Ceriani adjustable shocks in the rear. It had two 230mm drum brakes in the front, a 200mm drum brake in the back and both front and rear tires of different sizes. The rake was at 28.0 degrees, the trail was 82mm and the wheelbase was 1452mm. The seat height was 790mm and the dry weight was 215kg with fuel capacity of 19 litres.

Technical specifications:

Make Model: Laverda 750 SF1

Year: 1972
Engine: Four stroke, parallel twin cylinders, SOHC, 2 valve per cylinder
Capacity: 744 cc / 45.4 cu-in
Bore x Stroke: 80 x 74 mm
Cooling System: Air cooled
Compression Ratio: 8.9:1
Induction: 2x 36mm Dell’Orto PHF carburetors
Ignition: Bosch electronic
Starting: Electric
Max Power: 65 hp / 47.4 kW @ 7300 rpm
Clutch: wet plate
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Ceriani telescopic forks
Rear Suspension: Swinging fork, Ceriani adjustable shocks
Front Brakes: 2X 230mm drum
Rear Brakes: 200mm drum
Front Tyre: 3.50-18
Rear Tyre: 4.0-18
Rake: 28.0 degrees
Trail: 82 mm / 3.2 in
Wheelbase: 1452 mm / 57.2 in
Seat Height: 790 mm / 31.1 in
Dry Weight: 215 kg / 474 lbs
Fuel Capacity: 19 Litres / 5.0 US gal

The post Laverda SF1 750 (1972) appeared first on MotorcycleSpecifications.com.

]]> Laverda RGS1000 Corsa (1984) https://motorcyclespecifications.com/laverda-rgs1000-corsa-1984-specs/ Wed, 29 Mar 2023 15:07:01 +0000 https://motorcyclespecifications.com/?p=36464 The Laverda RGS1000 Corsa is a motorcycle with a four-stroke, transverse three-cylinder, DOHC, 2 valve per cylinder engine with a capacity of 981cc/59.8 cu-in. It has a compression ratio of

The post Laverda RGS1000 Corsa (1984) appeared first on MotorcycleSpecifications.com.

]]> The Laverda RGS1000 Corsa is a motorcycle with a four-stroke, transverse three-cylinder, DOHC, 2 valve per cylinder engine with a capacity of 981cc/59.8 cu-in. It has a compression ratio of 10.0:1 and uses three 32mm Dell’Orto carbs for induction. The bike has a maximum power output of 97 hp / 70.7 kW at 7800 rpm and a maximum torque output of 90 Nm / 66.3 lb-ft at 7000 rpm. The transmission is a 5-speed gearbox and the final drive is a chain. The front suspension features air-assisted Marzocchi forks, while the rear suspension has dual Marzocchi air-assisted forks with 5-way spring preload. The front brakes consist of two 280mm discs with dual-piston calipers, and the rear brake is a single 280mm disc with a single-piston caliper. The bike features a 100/90-18 front tire and a 120/90-18 rear tire. It has a wet weight of 253 kg / 558 lbs and a fuel capacity of 22 liters / 5.8 US gallons. The bike has an average fuel consumption of 32 mpg and can reach a top speed of 136 mph. In a group test in 1985 by Motosprint, the Laverda RGS1000 Corsa had a standing 1/4 mile time of 11.8 seconds at 112.7 mph.

Technical specifications:

Make Model: Laverda RGS1000 Corsa

Year: 1984
Engine: Four stroke, transverse three cylinder, DOHC, 2 valve per cylinder.
Capacity: 981 cc / 59.8 cu-in
Bore x Stroke: 75 x 74 mm
Cooling System: Air cooled
Compression Ratio: 10.0:1
Induction: 3x 32mm Dell’Orto carbs
Ignition: Borsch electronic
Starting: Electric
Max Power: 97 hp / 70.7 kW @ 7800 rpm
Max Torque: 90 Nm / 66.3 lb-ft @ 7000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Marzocchi air assisted forks
Rear Suspension: Dual Marzocchi air assisted forks, 5-way spring preload
Front Brakes: 2x 280mm discs 2 piston calipers
Rear Brakes: Single 280mm disc 1 piston caliper
Front Tyre: 100/90-18
Rear Tyre: 120/90-18
Wet weight: 253 kg / 558 lbs
Fuel Capacity: 22 Litres / 5.8 US gal
Consumption average: 32 mpg
Braking 60 – 0 / 100 – 0: – / 130ft
Standing 1/4 Mile: 11.8 sec / 112.7 mph
Top Speed: 136 mph
Road Test: Group Test 1985 Motosprint

The post Laverda RGS1000 Corsa (1984) appeared first on MotorcycleSpecifications.com.

]]> Laverda 1200TS Mirage (1979) https://motorcyclespecifications.com/laverda-1200ts-mirage-1979-specs/ Wed, 29 Mar 2023 12:44:06 +0000 https://motorcyclespecifications.com/?p=36331 The Laverda 1200TS Mirage is a motorcycle model from 1979 with a four-stroke transverse three-cylinder engine that has a capacity of 1115.8 cc/68 cu-in. Its air-cooling system, 3x 32mm side

The post Laverda 1200TS Mirage (1979) appeared first on MotorcycleSpecifications.com.

]]> The Laverda 1200TS Mirage is a motorcycle model from 1979 with a four-stroke transverse three-cylinder engine that has a capacity of 1115.8 cc/68 cu-in. Its air-cooling system, 3x 32mm side throttle Dell’Orto carburetors, and Bosch CDI ignition make it a powerful machine that can produce 73 hp/54.4 kW at 7500 rpm and has a maximum torque of 54.2 Nm/40 lb-ft at 6000 rpm. This bike has a 5-speed transmission and a chain final drive.

The Laverda 1200TS Mirage’s front suspension comprises 38mm Marzocchi forks that offer a 140 mm/5.5 in wheel travel, while the rear suspension features dual Marzocchi dampers with preload adjustment and a 100 mm/3.9 in wheel travel. The bike has 2x 280mm discs with 2-piston calipers on the front brake and a single 280mm disc with a 2-piston caliper on the rear brake. It rides on a 4.10 H18 front tyre and a 4.85 H18 rear tyre.

The Laverda 1200TS Mirage weighs 247 kg/544.5 lbs and has a fuel capacity of 19.5 Litres/5.1 US gal. Its fuel consumption average is 47 mpg, and it can go from 0 to 60 mph in 4.2 seconds, with a standing 1/4 mile taking 12.4 seconds. The top speed of this bike is 140 mph.

Technical specifications:

Make Model: Laverda 1200TS Mirage

Year: 1979
Engine: Four stroke, transverse three cylinder, DOHC, 2 valve per cylinder.
Capacity: 1115.8 cc / 68 cu-in
Bore x Stroke: 80 X 74 mm
Cooling System: Air cooled
Compression Ratio: 8.0:1
Induction: 3x 32mm Side throttle Dell’Orto carburetors
Ignition: Bosch CDI
Starting: Electric
Max Power: 73 hp / 54.4 kW @ 7500 rpm
Max Torque: 54.2 Nm / 40 lb-ft @ 6000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 38mm Marzocchi forks
Front Wheel Travel: 140 mm / 5.5 in
Rear Suspension: Dual Marzocchi dampers adjustment for preload
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: 2x 280mm discs 2 piston calipers
Rear Brakes: Single 280mm disc 2 piston caliper
Front Tyre: 4.10 H18
Rear Tyre: 4.85 H18
Wet Weight: 247 kg / 544.5 lbs
Fuel Capacity: 19.5 Litres / 5.1 US gal
Consumption Average: 47 mpg
Standing 1/4 Mile: 12.4 sec
Top Speed: 140 mph

The post Laverda 1200TS Mirage (1979) appeared first on MotorcycleSpecifications.com.

]]>