MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Laverda  Specifications

Laverda 750S (1969-70)

Entry updated

Laverda 750S (1969-70)

At a glance

Capacity
744 cc / 45.4 cu-in
Power
60 hp / 43.7 kW @ 6900 rpm

The full picture.

The Laverda 750S was produced from 1969 to 1970 and featured a four-stroke, parallel twin-cylinder engine with a capacity of 744cc. It had a compression ratio of 9.5:1 and was cooled by air. The bike had a maximum power output of 60 hp (43.7 kW) at 6900 rpm thanks to its 2x 29mm Dell’Orto vhb30 carburetors. The 5-speed transmission delivered power to the chain final drive. The front suspension featured Marzocchi telescopic forks and the rear suspension had swinging arm dual shocks. The front and rear brakes were both drums, with the front being 230mm and the rear being 200mm in size. The Laverda 750S had a wet weight of 231 kg (509.3 lbs) and could hold 19 litres (5.0 US gal) of fuel.


Technical specifications:

Make Model: Laverda 750S

Motorcycle technical specifications
Year1969 – 70
EngineFour stroke, parallel twin cylinders, SOHC, 2 valve per cylinder
Capacity744 cc / 45.4 cu-in
Bore x Stroke80 x 74 mm
Cooling SystemAir cooled
Compression Ratio9.5:1
Induction2x 29mm Dell’Orto vhb30 carburetors
Ignition
StartingElectric
Max Power60 hp / 43.7 kW @ 6900 rpm
Transmission5 Speed
Final DriveChain
Front SuspensionMarzocchi telescopic forks
Rear SuspensionSwinging arm dual shocks
Front Brakes230mm Drum
Rear Brakes200mm Drum
Front Tyre3.50-18
Rear Tyre4.00-18
Wet Weight231 kg / 509.3 lbs
Fuel Capacity19 Litres / 5.0 US gal