2007-08 Archives - MotorcycleSpecifications.com Find your motorcycle specifications Sun, 16 Apr 2023 22:21:40 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Harley Davidson FXDC Dyna Super Glide Custom (2007-08) https://motorcyclespecifications.com/harley-davidson-fxdc-dyna-super-glide-custom-2007-08-specs/ Fri, 07 Apr 2023 14:56:14 +0000 https://motorcyclespecifications.com/?p=48331 The Harley Davidson FXDC Dyna Super Glide Custom was manufactured between 2007 and 2008. It has a four-stroke, 45-degree V-twin, Twin Cam 96 engine with a capacity of 1584cc/96cu-in, and

The post Harley Davidson FXDC Dyna Super Glide Custom (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson FXDC Dyna Super Glide Custom was manufactured between 2007 and 2008. It has a four-stroke, 45-degree V-twin, Twin Cam 96 engine with a capacity of 1584cc/96cu-in, and the valves are pushrod-operated with hydraulic self-adjusting lifters. The bike is air-cooled and has an electronic sequential port fuel injection system. The ignition is single-fire, non-wasted, and map-controlled spark ignition, and the bike can be started electrically. The motorcycle has a maximum torque of 124.7 Nm/92 ft/lbs. @ 3000 rpm and a six-speed transmission with a belt for final drive. Its frame is made of mild steel, tubular steel, and has a rectangular section backbone. The front suspension features 49mm polished aluminum fork triple clamps and dual-rate springs. The rear suspension is a coil-over shock. The front brakes have a single 300mm disc four-piston caliper, while the rear brakes also have a single 292mm disc four-piston caliper. The bike’s front tire is a 100/90-19 57H, and the rear tire is 160/70B17 73V. The rake is at 29 degrees, and the fork angle is at 30.5 degrees with a trail of 114mm/4.3in. The bike is 2364.0mm/93.1in in length, 921.0mm/36.3in in width, and 1194.0mm/47.0in in height. The wheelbase is 1640.0mm/64.6in, and the seat height is at 655.3mm/25.8in laden2 and 680.0mm/26.8in unladen. With a ground clearance of 142mm/5.6in, the bike’s dry weight is 291kg/641lbs, and its wet weight is 308.0kg/679lbs. Finally, the fuel capacity is at 18.2 litres/4.8 US gal.


Technical specifications:

Make Model: Harley Davidson FXDC Dyna Super Glide Custom

Year: 2007 – 08
Engine: Four stroke, 45 degrees V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder
Capacity: 1584 cc / 96 cu-in
Bore x Stroke: 95.3 x 111.1 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 124.7 Nm / 92 ft/ lbs. @ 3000 rpm
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.311 2nd 6.454 3rd 4.793 4th 3.882 5th 3.307 6th 2.79
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs,
Rear Suspension: Coil over shock ,
Front Brakes: Single 300mm disc 4 piston caliper
Rear Brakes: Single 292mm disc 4 piston caliper
Front Tyre: 100/90-19 57H
Rear Tyre: 160/70B17 73V
Rake: 29 degrees
Fork Angle: 30.5 degrees
Trail: 114 mm / 4.3 in
Dimensions: Length 2364.0 mm / 93.1 in Width 921.0 mm / 36.3 in Height 1194.0 mm / 47.0 in
Wheelbase: 1640.0 mm / 64.6 in
Seat Height: Laden2 655.3 mm / 25.8 in Unladen 680.0 mm / 26.8 in
Ground Clearance: 142 mm / 5.6 in
Dry Weight: 291 kg / 641 lbs
Wet Weight: 308.0 kg / 679 lbs
Fuel Capacity: 18 2 Litres / 4.8 US gal

The post Harley Davidson FXDC Dyna Super Glide Custom (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
KTM 450 EXC (2007-08) https://motorcyclespecifications.com/ktm-450-exc-2007-08-specs/ Fri, 07 Apr 2023 08:23:07 +0000 https://motorcyclespecifications.com/?p=48038 The KTM 450 EXC is a four-stroke, single-cylinder motorcycle with a capacity of 447.9 cc. It features a central tube chrome-moly-steel frame and a WP 4860 MA upside-down fork for

The post KTM 450 EXC (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The KTM 450 EXC is a four-stroke, single-cylinder motorcycle with a capacity of 447.9 cc. It features a central tube chrome-moly-steel frame and a WP 4860 MA upside-down fork for the front suspension. The rear suspension is a WP-PDS shock absorber with an aluminum swingarm. It has a 6-speed transmission and a wet multi-disc clutch that is hydraulically operated. The final drive is a chain and the front brake features a single 260 mm floating caliper disc. The rear brake is a single 220mm floating caliper disc. The KTM 450 EXC has a wheelbase of 1481 mm and a seat height of 970 mm. It has a ground clearance of 380 mm and a dry weight of 113.5 kg. The fuel tank has a capacity of 9.0 L. The engine oil capacity is 1.25 L and it requires full synthetic oil (Motorex Power Synt 4T 10W/50).


Technical specifications:

Make Model: KTM 450 EXC

Year: 2007 – 08
Engine: Four stroke, single cylinder, SOHC, 4 valves per cylinder
Capacity: 447.9 cc / 27.42 cu-in
Bore x Stroke: 89 x 72 mm
Compression Ratio: 11.1:1
Lubrication: Pressure lubrication with 2 rotor pumps
Induction: Keihin MX FCR 39 carburetor
Spark Plug: NGK DCPR 8 E
Ignition: Kokusan digital
Starting: Electric & kick
Battery: 12V 8Ah, maintenance free
Clutch: Wet multi-disc clutch, operated hydraulically
Transmission: 6 Speed
Gear Ratios: 1st 14:34 / 2nd 17:31 / 3rd 19:28 / 4th 22:26 / 5th 24:23 / 6th 26:21
Final Drive Ratio: 14:52
Final Drive: Chain, X ring, 5.8 x 1/4″
Frame: Central tube chrome-moly-steel frame
Front Suspension: WP 4860 MA upside-down fork
Front Wheel Travel: 300 mm / 11.8 in
Rear Suspension: WP-PDS shock absorber, aluminium swingarm
Rear Wheel Travel: 335 mm / 13.2 in
Front Brakes: Single 260 mm disc, floating caliper
Rear Brakes: Single 220mm disc, floating caliper
Front Tyre: 90/90 – 21
Rear Tyre: 140/80 – 18
Wheelbase: 1481 mm / 58.3 in
Seat Height: 970 mm / 38.7 in
Ground Clearance: 380 mm / 15.0 in
Dry Weight: 113.5 kg / 250.2 lbs
Engine Oil Capacity: 1.25 L / 1.3 US qt / 1.1 Imp qt, full synthetic oil (Motorex Power Synt 4T 10W/50)
Fuel Capacity: 9.0 L / 2.4 US gal / 2.0 Imp gal
Overview: Motorcycle-USA

The post KTM 450 EXC (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Suzuki Boulevard C50 (2007-08) https://motorcyclespecifications.com/suzuki-boulevard-c50-2007-08-specs/ Fri, 07 Apr 2023 01:38:05 +0000 https://motorcyclespecifications.com/?p=47665 The Suzuki Boulevard C50 (2007-08) is a motorcycle with a four stroke, 45 degree V-Twin engine and a capacity of 805 cc. It has a compression ratio of 9.4:1 and

The post Suzuki Boulevard C50 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Suzuki Boulevard C50 (2007-08) is a motorcycle with a four stroke, 45 degree V-Twin engine and a capacity of 805 cc. It has a compression ratio of 9.4:1 and is liquid cooled with Mikuni BDSR 34 carburetors. The bike has a maximum power output of 36.4 kW / 50 hp at 6500 rpm, and a maximum torque of 65 Nm / 6.6 kgf-m / 47.9 lb-ft at 5000 rpm. It has a wet, multi-plate clutch, a 5-speed transmission, and a shaft final drive. The front suspension is a conventional telescopic fork, oil damped, coil-sprung, and the rear suspension is a link type, mono-shock, 7-way adjustable. The front brakes are a single 300 mm disc with a 2 piston caliper, and the rear brakes are a 180 mm drum. The front tire is a 130/90-16 M/C 67H and the rear tire is a 170/80-15 M/C 77H. The motorcycle is 2395 mm / 94.3 in in length, 890 mm / 35.0 in in width, and has a wheelbase of 1655 mm / 65.2 in. The seat height is 700 mm / 28.0 in and the ground clearance is 140 mm / 5.5 in. The dry weight of the motorcycle is 246 kg / 542 lbs and it has a fuel capacity of 15.5 litres / 4.1 US gal / 3.4 Imp gal. Reviews of the Suzuki Boulevard C50 (2007-08) can be found in Motorcycle News.


Technical specifications:

Make Model: Suzuki Intruder C800 Intruder / C50 Boulevard

Year: 2007 – 08
Engine: Four stroke, 45 degreesV-Twin, SOHC, 4 valves per cylinder.
Capacity: 805 cc / 49.1 cu in
Bore x Stroke: 83 x 74.4 mm
Compression Ratio: 9.4:1
Cooling System: Liquid cooled
Induction: Mikuni BDSR 34 carburetors
Ignition: Digital transistorized
Starting: Electric
Max Power: 36.4 kW / 50 hp @ 6500 rpm
Max Torque: 65 Nm / 6.6 kgf-m / 47.9 lb-ft @ 5000 rpm
Clutch: Wet, multi-plate
Transmission: 5 Speed
Final Drive: Shaft
Front Suspension: Conventional telescopic fork, oil damped, coil-sprung
Rear Suspension: Link type, mono-shock,7-way adjustable
Front Brakes: Single 300 mm disc, 2 piston caliper
Rear Brakes: 180 Drum
Front Tyre: 130/90-16 M/C 67H
Rear Tyre: 170/80-15 M/C 77H
Dimensions: Length: 2395 mm / 94.3 in Width: 890 mm / 35.0 in
Wheelbase: 1655 mm / 65.2 in
Seat Height: 700 mm / 28.0 in
Ground Clearance: 140 mm / 5.5 in
Dry Weight: 246 kg / 542 lbs
Fuel Capacity: 15.5 Litres / 4.1 US gal / 3.4 Imp gal
Review: Motorcycle News

The post Suzuki Boulevard C50 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
KTM lc4 690 Supermoto (2007-08) https://motorcyclespecifications.com/ktm-lc4-690-supermoto-2007-08-specs-2/ Thu, 06 Apr 2023 12:20:06 +0000 https://motorcyclespecifications.com/?p=46948 The KTM lc4 690 Supermoto (2007-08) motorcycle is a popular choice for riders who seek thrilling adventures on the road. This bike stands out for its excellent handling and agility,

The post KTM lc4 690 Supermoto (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The KTM lc4 690 Supermoto (2007-08) motorcycle is a popular choice for riders who seek thrilling adventures on the road. This bike stands out for its excellent handling and agility, thanks to its lightweight design and powerful engine. The lc4 690 Supermoto boasts a liquid-cooled, single-cylinder, four-stroke engine that delivers up to 65 horsepower and 50 lb-ft of torque. This engine is paired with a six-speed transmission that allows for smooth and precise shifting. The lc4 690 Supermoto also features a fully adjustable suspension system, which ensures a comfortable ride in all road conditions. Additionally, this bike comes with advanced safety features like ABS brakes and a slipper clutch, enhancing the rider’s control and stability on the road. The lc4 690 Supermoto also boasts a sleek and modern design, with a sporty body and sharp lines that exude sophistication and style. Riders can choose from a range of color options, including black, orange, and white. Overall, the KTM lc4 690 Supermoto (2007-08) motorcycle is a top choice for riders who want a high-performance bike that can handle any terrain with ease. Its power, agility, and advanced features make it an impressive machine for riders of all skill levels.


Technical specifications:

Continue reading

The post KTM lc4 690 Supermoto (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Suzuki DL 650 V-Strom (2007-08) https://motorcyclespecifications.com/suzuki-dl-650-v-strom-2007-08-specs-2/ Thu, 06 Apr 2023 08:48:05 +0000 https://motorcyclespecifications.com/?p=46752 The Suzuki DL 650 V-Strom motorcycle was produced from 2007 to 2008. It has a four-stroke, 90-degrees V-twin engine with a capacity of 645cc and a compression ratio of 11.5:1.

The post Suzuki DL 650 V-Strom (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Suzuki DL 650 V-Strom motorcycle was produced from 2007 to 2008. It has a four-stroke, 90-degrees V-twin engine with a capacity of 645cc and a compression ratio of 11.5:1. The ignition system uses electronic ignition and the fuel delivery system is fuel injection with a 39mm induction. The motorcycle has a wet sump lubrication system and an electric start. It can produce a maximum power output of 49kW or 66.6hp at 8800 rpm and maximum torque of 63.1 Nm or 45.5 lb-ft at 7600 rpm. The clutch is cable operated and uses multiple wet discs, and the final drive is a chain. The frame is made of aluminum and has a twin-spar design. The front suspension is telescopic and coil-sprung with spring preload adjustable at 160mm travel. The rear suspension is link-type and oil-damped with a fully adjustable spring preload and rebound damping force and a travel of 163mm. It has 2-piston caliper, ABS-assisted brakes with a 310mm disc at the front and a 1-piston caliper, ABS-assisted brakes with a 260mm disc at the rear. The motorcycle has a length of 2290mm, a width of 840mm, and a height of 1390mm. The wheelbase is 1555mm and the seat height is 820mm. The ground clearance is 165mm, and the dry weight is 194kg or 427.6lbs. The fuel tank capacity is 22 liters or 5.8 gallons. The standing 1/4 mile takes 13.2 seconds, and the top speed is 180km/h or 112mph.


Technical specifications:

Make Model: Suzuki DL 650 V-Strom

Year: 2007 – 08
Engine: Four stroke, 90 degrees-V-twin, DOHC, 4 valves per cylinder.
Capacity: 645 cc / 39.4 cu-in
Bore x Stroke: 81 x 62.6 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Lubrication: Wet sump
Induction: Fuel Injection 39 mm
Ignition: Electronic Ignition
Spark Plug: NGK, CR8E
Starting: Electric
Max Power: 49 kW / 66.6 hp @ 8800 rpm
Max Torque: 63.1 Nm / 6.4 kgf-m / 45.5 lb-ft @ 7600 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Frame: Aluminium, twin spar
Front Suspension: Telescopic, coil spring, oil damped, spring preload adjustable
Front Wheel Travel: 160 mm / 6.2 in
Rear Suspension: Link type, oil damped, coil spring, spring preload fully adjustable, rebound damping force fully adjustable
Rear Wheel Travel: 163 mm / 6.4 in
Front Brakes: 2 x 310 mm disc, 2 piston calipers, ABS
Rear Brakes: Single 260 mm disc, 1 piston caliper, ABS
Front Tyre: 110/80R19
Rear Tyre: 150/70R17
Dimensions: Length 2290 mm / 90.1 in Width 840 mm / 33.0 in Height 1390 mm / 54.7 in
Wheelbase: 1555 mm / 61.2 in
Seat Height: 820 mm / 32.3 in
Ground Clearance: 165 mm / 6.4 in
Dry Weight: 194 kg / 427.6 lbs
Wet Weight: 220 kg / 485 lbs
Fuel Capacity: 22 Litres / 5.8 US gal / 4.8 Imp gal
Standing 1/4 Mile: 13.2 sec
Top Speed: 180 km/h / 112 mph

The post Suzuki DL 650 V-Strom (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Suzuki Boulevard S40 (2007-08) https://motorcyclespecifications.com/suzuki-boulevard-s40-2007-08-specs/ Thu, 06 Apr 2023 06:32:06 +0000 https://motorcyclespecifications.com/?p=46636 The Suzuki Boulevard S40 is a 2007-08 motorcycle model with a four-stroke, single-cylinder, SOHC engine and a capacity of 652cc. With a bore and stroke of 94 x 94.0 mm,

The post Suzuki Boulevard S40 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Suzuki Boulevard S40 is a 2007-08 motorcycle model with a four-stroke, single-cylinder, SOHC engine and a capacity of 652cc. With a bore and stroke of 94 x 94.0 mm, the bike is air-cooled and has a compression ratio of 8.5:1. The Mikuni BS40 induction system is transistorized, and the motorcycle has an electric start. The bike has a maximum power of 23 kW (31 hp) at 5400 rpm and a maximum torque of 50 Nm (5.1 kgf-m/37 lb-ft) at 3400 rpm. It uses a wet clutch with multiple discs, is cable-operated, and has a 5-speed transmission with a belt final drive. The front suspension is telescopic and has 38-mm stanchions, coil spring, and oil damped, while the rear suspension is twin shock with five-way adjustable spring preload. The front brake has a 265 mm single disc with a drum rear brake that is rod operated. The bike measures 2180 mm in length, 720 mm in width, and 1105 mm in height, with a wheelbase of 1480 mm and a seat height of 700 mm. The dry weight is 160 kg, and the wet weight is 172 kg, with a GVWR of 356 kg. The fuel tank capacity is 10.5 liters or 2.6 US gallons. The motorcycle cruiser reviewed the bike.


Technical specifications:

Make Model: Suzuki Boulevard S40

Year: 2007 – 08
Engine: Four stroke, single cylinder, SOHC
Capacity: 652 cc / 39.8 cu-in
Bore x Stroke: 94 x 94.0 mm
Cooling System: Air cooled
Compression Ratio: 8.5:1
Lubrication: Wet sump
Induction: Mikuni BS40
Ignition: Transistorized
Starting: Electric
Max Power: 23 kW / 31 hp @5400 rpm
Max Torque: 50 Nm / 5.1 kgf-m / 37 lb-ft @3400 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 5 Speed
Final Drive: Belt
Front Suspension: Telescopic 38 mm stanchions, coil spring, oil damped
Front Wheel Travel: 140 mm / 5.5 in
Rear Suspension: Twin shock, 5-way adjustable spring preload
Rear Wheel Travel: 80 mm / 3.1 in
Front Brakes: 265 mm Single disc
Rear Brakes: Drum, rod operated
Front Tyre: 100/90-19 57H, tube type
Rear Tyre: 140/80-15 67H, tube type
Rake: 35 degrees
Trail: 147 mm / 5.8 in
Dimensions: Length 2180 mm / 85.8 in Width 720 mm / 28.3 in Height 1105 mm / 43.5 in
Wheelbase: 1480 mm / 58.3 in
Seat Height: 700 mm / 27.6 in
Ground Clearance: 135mm / 5.3 in
Dry Weight: 160 kg / 352 lbs
Wet Weight: 172 kg / 380 lbs
GVWR: 356 kg / 785 lbs
Fuel Capacity: 10.5 Litres / 2.6 US gal
Review: Motorcycle Cruiser

The post Suzuki Boulevard S40 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
KTM 300 EXC-E Enduro (2007-08) https://motorcyclespecifications.com/ktm-300-exc-e-enduro-2007-08-specs/ Thu, 06 Apr 2023 06:24:01 +0000 https://motorcyclespecifications.com/?p=46628 The KTM 300 EXC-E Enduro motorcycle was produced from 2007-2008 with a two-stroke, single-cylinder engine and a capacity of 297cc. It has a liquid-cooled cooling system and uses a Keihin

The post KTM 300 EXC-E Enduro (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The KTM 300 EXC-E Enduro motorcycle was produced from 2007-2008 with a two-stroke, single-cylinder engine and a capacity of 297cc. It has a liquid-cooled cooling system and uses a Keihin PWK36 S AG carburetor for induction. The Kokusan digital 2K-3 ignition allows for an electric start, and the engine produces 17 kW/23 hp at 6120 rpm. The transmission is a 5-speed with a wet, multi-plate, hydraulically-operated clutch and a final chain drive. The frame is a central double cradle, CrMo4 design, and the front suspension features a WP 48mm upside-down fork and shock, providing a wheel travel distance of 295mm. The rear suspension is fully adjustable WP-PDS mono-shock, with a wheel travel distance of 320mm. The motorcycle has a single 260mm disc, with a 2-piston caliper for front brakes and a single 220mm disc with a 1-piston caliper for rear brakes. The front tyre is a 90/90-21 Michelin MP11, and the rear tyre is a 140/80-18. The steering head angle is 62.5 degrees, with a wheelbase of 1476mm and a ground clearance of 386mm. The seat height is 945mm, and the dry weight is 103 kg. The fuel capacity is 8.5 liters.


Technical specifications:

Make Model: KTM 300 EXC-E Enduro

Year: 2007 – 08
Engine: Two stroke, single cylinder
Capacity: 297 cc / 18.1 cu in
Bore x Stroke: 72 x 72 mm
Compression Ratio: 12.8:1
Cooling System: Liquid cooled
Induction: Keihin PWK36 S AG carburetor
Ignition: Kokusan digital 2K-3
Starting: Electric
Power: 17 kW / 23 hp @ 6120 rpm
Clutch: Wet, multi-plate, hydraulically operated
Transmission: 5 Speed
Final Drive: Chain, Regina O-ring
Frame: Central double cradle, CrMo4
Front Suspension: WP 48 mm upside down fork and shock
Front Wheel Travel: 295 mm / 11.6 in
Rear Suspension: Fully adjustable WP-PDS mono-shock
Rear Wheel Travel: 320 mm / 12.6 in
Front Brakes: Single260 mm disc, 2 piston caliper
Rear Brakes: Single 220 mm disc, 1 piston caliper
Front Tyre: 90/90 – 21, Michelin MP11
Rear Tyre: 140/80 – 18
Steering Head Angle: 62.5o
Wheelbase: 1476 mm / 58.1 in
Ground Clearance: 386 mm / 15.2 in
Seat Height: 945 mm / 37.2 in
Dry Weight: 103 kg / 227 lbs
Fuel Capacity: 8.5 L / 2.2 US gal / 1.9 Imp gal

The post KTM 300 EXC-E Enduro (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Yamaha XVZ 1300 Royal Star Tour Deluxe (2007-08) https://motorcyclespecifications.com/yamaha-xvz-1300-royal-star-tour-deluxe-2007-08-specs-2/ Wed, 05 Apr 2023 18:07:09 +0000 https://motorcyclespecifications.com/?p=45958 The Yamaha XVZ 1300 Royal Star Tour Deluxe is a 2007-08 motorcycle with a liquid-cooled, four-stroke V-four cylinder engine and a capacity of 1294cc. Its compression ratio is 10.0:1 and

The post Yamaha XVZ 1300 Royal Star Tour Deluxe (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Yamaha XVZ 1300 Royal Star Tour Deluxe is a 2007-08 motorcycle with a liquid-cooled, four-stroke V-four cylinder engine and a capacity of 1294cc. Its compression ratio is 10.0:1 and it has four 32mm Mikuni constant-velocity induction valves. The bike starts electrically and has a maximum power of 98 horsepower and maximum torque of 123 Nm at 4750 rpm. The clutch is wet and multiple discs, and the transmission is five speed. The bike has a shaft final drive, a steel double-cradle frame, and air-assisted telescopic fork front suspension with a wheel travel of 142mm. The rear suspension is a single-shock, link-type w/air assist with a wheel travel of 104mm. The bike features 2x 298mm discs and four-piston calipers for the front brakes and a single 320mm disc and one-piston caliper for the rear brakes. The Yamaha XVZ 1300 has a seat height of 739mm and a dry weight of 357 kg. Fuel capacity measures 20 litres, or 5.3 US gallons.


Technical specifications:

Make Model: Yamaha XVZ 1300 Royal Star Tour Deluxe

Year: 2007 – 08
Engine: Four stroke, 70 degreesV-four cylinder, DOHC, 4 valve per cylinder
Capacity: 1294 cc / 78.9 cu-in
Bore x Stroke: 79 66 mm
Cooling System: Liquid cooled
Compression Ratio: 10.0:1
Induction: 4x 32mm Mikuni Constant-Velocity
Ignition: Digital TCI
Starting: Electric
Max Power: 98 hp / 71.5 kW @ 4750 rpm
Max Torque: 123 Nm / 90.7 lb-ft @ 4750 rpm
Clutch: wet, multiple discs, cable operated
Transmission: 5 Speed
Final Drive: Shaft
Frame: Steel, Double cradle frame
Front Suspension: Air assisted telescopic fork
Front Wheel Travel: 142 mm / 5.5 in
Rear Suspension: Single shock, link-type w/air assist
Rear Wheel Travel: 104 mm / 4.0 in
Front Brakes: 2x 298mm discs 4 piston calipers
Rear Brakes: Single 320mm disc 1 piston caliper
Front Tyre: 150/80-16
Rear Tyre: 150/90-15
Seat Height: 739 mm / 29.1 in
Dry Weight: 357 kg / 842.6 lb
Fuel Capacity: 20 Litres / 5.3 US gal

The post Yamaha XVZ 1300 Royal Star Tour Deluxe (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson FLHTC Electra Glide Classic (2007-08) https://motorcyclespecifications.com/harley-davidson-flhtc-electra-glide-classic-2007-08-specs/ Wed, 05 Apr 2023 16:45:00 +0000 https://motorcyclespecifications.com/?p=45885 The Harley Davidson FLHTC Electra Glide Classic is a motorcycle that was produced between 2007 and 2008. It is powered by a four-stroke, 45-degree V-twin engine, utilizing Twin Cam 96

The post Harley Davidson FLHTC Electra Glide Classic (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson FLHTC Electra Glide Classic is a motorcycle that was produced between 2007 and 2008. It is powered by a four-stroke, 45-degree V-twin engine, utilizing Twin Cam 96 vibration isolation-mounted valves and pushrod-operated overhead valves. This engine has a displacement of 1584cc (96 cu-in) and a compression ratio of 9.2:1. The bike also features Electronic Sequential Port Fuel Injection (ESPFI) induction and a single-fire, non-wasted, map-controlled spark ignition. The transmission is a 6-speed with a final drive via belt. The frame is made of mild steel with a square-section backbone and twin downtubes. Suspension is provided via 41.3mm telescopic, cartridge-style damping up front and a short, air-adjustable shock in the rear. The front brakes are dual 292mm discs with 4 piston calipers, while the rear brake is a single 292mm disc with a 4 piston caliper. Tyres are a MT90B16 in the front and a MU85B16 in the rear. The motorcycle has a laden seat height of 693.4mm (27.3in) and an unladen seat height of 779.7mm (30.7in). The gross vehicle weight rating is 616.9kg (1360lbs) with a wet weight of 391.91kg (864lbs). The fuel tank has a capacity of 22.7 litres (6.0 US gal).


Technical specifications:

Make Model: Harley Davidson FLHTC Electra Glide Classic

Year: 2007 – 08
Engine: Four stroke, 45 degrees V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder
Capacity: 1584 cc / 96 cu-in
Bore x Stroke: 95.2 x 111.2 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starring: Electric
Max Torque: 124.7 Nm / 92 ft. lbs @ 3000 rpm
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.312 9.312 9.312 2nd 6.421 6.421 6.421 3rd 4.774 4.774 4.774 4th 3.926 3.926 3.926 5th 3.279 3.279 3.279 6th 2.790 2.790 2.790
Frame: Mild steel, square-section backbone with twin downtubes
Front Suspension: 41.3 mm telescopic, cartridge-style damping
Rear Suspension: Short, air-adjustable shock
Front Brakes: 2x 292mm disc 4 piston caliper
Rear Brakes: Single 292mm disc 4 piston caliper
Front Tyre: MT90B16
Rear Tyre: MU85B16
Seat Height: Laden2 693.4 mm / 27.3 in Unladen 779.7 mm / 30.7 in.
Gross Vehicle Weight Rating: 616.9 kg / 1360 lbS
Wet Weight: 391.91 kg / 864 lb
Fuel Capacity: 22.7 Litres / 6.0 US gal

The post Harley Davidson FLHTC Electra Glide Classic (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Kawasaki Ninja 500R (2007-08) https://motorcyclespecifications.com/kawasaki-ninja-500r-2007-08-specs/ Wed, 05 Apr 2023 14:58:09 +0000 https://motorcyclespecifications.com/?p=45786 The Kawasaki Ninja 500R (2007-08) motorcycle has a four-stroke parallel twin cylinder engine with a DOHC and 4 valves per cylinder. It has a capacity of 498cc or 30.4 cu-in

The post Kawasaki Ninja 500R (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Kawasaki Ninja 500R (2007-08) motorcycle has a four-stroke parallel twin cylinder engine with a DOHC and 4 valves per cylinder. It has a capacity of 498cc or 30.4 cu-in and a compression ratio of 10.8:1. The engine is liquid-cooled and uses a wet sump for lubrication. The motorcycle has 2x Keihin CVK34 carburetors for induction and a TCI (Transistor Controlled Ignition) for ignition. It has an electric starting system and can deliver a maximum power of 60 hp / 43.7 kW at 9800 rpm.

The motorcycle has a 6-speed transmission and a chain final drive. Its frame is made of iron and has a double cradle frame. The front suspension consists of 38mm telescopic forks with a wheel travel of 130 mm / 5.1 in, while the rear suspension is a swinging arm, single shock adjustable for spring preload with a wheel travel of 100 mm / 3.9 in. The front brakes are single 270mm discs with 2 piston calipers, and the rear brake is a single disc. The motorcycle has a trail of 91 mm / 3.5 in and a rake of 63 degrees.

The dimensions of the Kawasaki Ninja 500R are length 2095 mm / 82.4 in, width 700 mm / 30.3 in, and height 1160 mm / 45.6 in. Its wheelbase is 1435 mm / 56.4 in, and its seat height is 775 mm / 30.5 in. The motorcycle has a dry weight of 176 kg / 388 lbs and a fuel capacity of 15.9 Litres / 4.2 US gal.


Technical specifications:

Make Model: Kawasaki GPz 500S / EX 500R Ninja

Year: 2007 – 08
Engine: Four stroke, parallel twin cylinders. DOHC, 4 valves per cylinder.
Capacity: 498 cc / 30.4 cu-in
Bore x Stroke: 74 x 58 mm
Cooling System: Liquid cooled,
Compression Ratio: 10.8:1
Lubrication: Wet sump
Engine Oil: Semi-Synthetic, 10W/40
Induction: 2x Keihin CVK34 carburetor
Ignition: TCI (Transistor Controlled Ignition)
Spark Plug: NGK, DR9EA
Starting: Electric
Max Power: 60 hp / 43.7 kW @ 9800 rpm
Max Power Rear Tyre: 54.7 hp @ 9500 rpm
Max Torque: 46.1 Nm / 4.7 kg-m @ 8500 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Frame: Iron, Double cradle frame
Front Suspension: 38mm Telescopic forks
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Swinging arm, single shock adjustable for spring preload
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: Single 270mm disc 2 piston caliper
Rear Brakes: Single disc
Trail: 91 mm / 3.5 in
Front Tyre: 110/70- 17
Rear Tyre: 130/70 – 17
Rake: 63 degrees
Trail: 91 mm / 3.5 in
Dimensions: Length 2095 mm / 82.4 in Width 700 mm / 30.3 in Height: 1160 mm / 45.6 in
Wheelbase: 1435 mm / 56.4 in
Seat Hieght: 775 mm / 30.5 in
Dry Weight: 176 kg / 388 lbs
Fuel Capacity: 15.9 Litres / 4.2 US gal

The post Kawasaki Ninja 500R (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Suzuki B-King 1300 (2007-08) https://motorcyclespecifications.com/suzuki-b-king-1300-2007-08-specs/ Wed, 05 Apr 2023 10:04:04 +0000 https://motorcyclespecifications.com/?p=45520 The Suzuki GSX 1300 B-King was produced from 2007-08 and has a four-stroke, transverse four-cylinder engine with 4 valves per cylinder and a capacity of 1340cc. It’s liquid-cooled with a

The post Suzuki B-King 1300 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Suzuki GSX 1300 B-King was produced from 2007-08 and has a four-stroke, transverse four-cylinder engine with 4 valves per cylinder and a capacity of 1340cc. It’s liquid-cooled with a compression ratio of 12.5:1 and uses wet sump lubrication. The exhaust system is a 4-into-2-into-1 design, meeting Euro 3 and Tier 2 regulations, and has a catalyzer and oxygen sensors. Fuel injection is used with a Suzuki SDTV system and dual injectors per cylinder with a ram air intake and large volume airbox. The bike has a six-speed transmission and chain final drive. The frame is a twin-spar cast aluminum alloy with fully adjustable inverted telescopic coil springs front suspension and link-type oil damped coil springs rear suspension, both with rebound and compression damping. The front brakes use 2 x 310mm discs with 4 piston calipers and the rear brake is a single 260mm disc with 1 piston caliper. The bike weighs 235kg and has a fuel capacity of 16.5 litres. It has a standing quarter-mile time of 10.4 seconds and a top speed of 252.9 km/h. The bike has received positive reviews from Moto.net, 1000os, and has been compared to the BMW K 1300 R.


Technical specifications:

Make Model: Suzuki GSX 1300 B-King

Year: 2007-08
Engine: Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder
Capacity: 1340 cc / 81.8 cu-in
Bore x Stroke: 81 x 65 mm
Cooling System: Liquid cooled
Compression Ratio: 12.5:1
Lubrication: Wet sump
Exhaust: 4-into-2-into-1 exhaust system with a large capacity catalyzer, oxygen sensors and an oval cross section canister with dual openings that meets Euro 3 and Tier 2 regulation
Induction: Fuel injection . Suzuki SDTV fuel injection system with dual injectors per cylinder and ram air intake with large volume airbox
Ignition: Electronic
Starting: Electric
Max Power: 132.1 kW / 181.5 hp @ 9500 rpm
Max Torque: 146 Nm / 14.9 kgf-m / 108 lb-ft @ 7200 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain, RK GB50GSV Z4, 118 links
Frame: Twin-spar cast aluminum alloy
Front Suspension: Inverted telescopic coil springs, spring preload, rebound and compression damping fully adjustable.
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Link type, oil damped, coil springs, spring preload, rebound and compression damping fully adjustable.
Rear Wheel Travel: 137 mm / 5.4 in
Front Brakes: 2 x 310 mm Discs, 4 piston calipers
Rear Brakes: Single 260m disc, 1 piston caliper
Front Wheel: 3.50 x 17
Rear Wheel: 6.00 x 17
Front Tyre: 120/70 ZR17
Rear Tyre: 200/50 ZR17
Rake: 25.7 degrees
Trail: 107 mm / 4.2 in
Dimensions: Length 2245 mm / 88.4 in Width 800 mm / 31.5 in
Wheelbase: 1525 mm / 60.0 in
Seat Height: 805 mm / 31.7 in
Ground Clearance: 120 mm / 4.7 in
Dry Weight: 235.0 kg / 518.1 lbs
Fuel Capacity: 16.5 Litres / 4.4 US gal / 3.6 Imp gal
Consumption Average: 6.2 L/100 km / 16.1 km/l / 38 US mpg / 45 Imp mpg
Standing 1/4 Mile: 10.4 sec
Top Speed: 252.9 km/h / 157.1 mph
Reviews: Moto.net / 1000os / BMW K 1300 R vs Suzuki GSX 1300 B-King

The post Suzuki B-King 1300 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Suzuki GSF 650N Bandit (2007-08) https://motorcyclespecifications.com/suzuki-gsf-650n-bandit-2007-08-specs/ Wed, 05 Apr 2023 08:34:18 +0000 https://motorcyclespecifications.com/?p=45435 The 2007-08 Suzuki GSF 650N Bandit motorcycle has an air/oil cooled, four stroke, transverse four cylinder DOHC engine with a capacity of 656cc. Its bore x stroke is 65.5 x

The post Suzuki GSF 650N Bandit (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The 2007-08 Suzuki GSF 650N Bandit motorcycle has an air/oil cooled, four stroke, transverse four cylinder DOHC engine with a capacity of 656cc. Its bore x stroke is 65.5 x 48.7 mm and it has a compression ratio of 10.5:1. The bike’s maximum power output is 62.5 kW / 85 hp at 10500 rpm and its maximum torque is 64 Nm / 6.5 kgf-m / 47.2 lb-ft at 8900 rpm. The bike has a six-speed transmission with a final drive via chain. The frame is of a double cradle design and the front suspension is a 41mm telescopic fork with preload that is fully adjustable. The rear suspension is a link type, oil damped mono-shock with spring pre-load that is seven-way adjustable and rebound damping that is four-way adjustable. The front brakes feature two 290 mm discs with two piston calipers while the rear brake is a single 240 mm disc with two piston calipers. The bike’s front tyre is 120/70 ZR17 with the rear being a 160/60 ZR17. In dimensions, the bike is 2110mm length, 770mm width, and 1090mm height, with a wheelbase of 1440 mm, ground clearance of 130 mm and a seat height of 770 – 790 mm. The bike has a dry weight of 201 kg and a fuel capacity of 20 Litres. Its average consumption is 4.8 L/100 km and its standing 1/4 mile is 12.5 sec. The top speed achievable by the bike is 198.7 km/h / 123.5 mph.


Technical specifications:

Make Model: Suzuki GSF 650N Bandit

Year: 2007 – 08
Engine: Air/oil cooled, four stroke, transverse four cylinder, DOHC, 4 valves per cylinder.
Capacity: 656cc / 40.0 cu in
Bore x Stroke: 65.5 x 48.7 mm
Compression Ratio: 10.5:1
Cooling System: Air/oil cooled
Induction: 4 x Keihin CVR 32 carburetors
Ignition: Digital transistorized
Starting: Electric
Max Power: 62.5 kW / 85 hp @ 10500 rpm
Max Torque: 64 Nm / 6.5 kgf-m / 47.2 lb-ft @ 8900 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Double cradle
Front Suspension: 41mm Telescopic fork, preload fully adjustable
Rear Suspension: Link type, oil damped, mono-shock, spring pre-load 7-way adjustable, rebound damping 4-way adjustable
Front Brakes: 2 x 290 mm Discs, 2 piston calipers
Rear Brakes: Single 240 mm disc, 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 160/60 ZR17
Dimensions: Length: 2110 mm / 83.1 in Width: 770 mm / 30.3 in Height: 1090 mm / 42.9 in
Wheelbase: 1440 mm / 56.7 in
Ground Clearance: 130 mm / 5.1 in
Seat Height: 770 – 790 mm / 30.3 – 31.1 in
Dry Weight: 201 kg / 443 lbs
Fuel Capacity: 20 Litres / 5.3 US gal / 4.4 Imp gal
Consumption Average: 4.8 L/100 km / 20.9 km/l / 49.2 US mpg / 59.0 Imp mpg
Standing 1/4 Mile: 12.5 sec
Top Speed: 198.7 km/h / 123.5 mph

The post Suzuki GSF 650N Bandit (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Suzuki DR 650 SE (2007-08) https://motorcyclespecifications.com/suzuki-dr-650-se-2007-08-specs/ Wed, 05 Apr 2023 05:20:05 +0000 https://motorcyclespecifications.com/?p=45256 The Suzuki DR 650SE was released in 2007-08 and features a four stroke, single cylinder engine with a capacity of 644cc. It has a maximum power of 32kW/43.5hp and maximum

The post Suzuki DR 650 SE (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Suzuki DR 650SE was released in 2007-08 and features a four stroke, single cylinder engine with a capacity of 644cc. It has a maximum power of 32kW/43.5hp and maximum torque of 54Nm/39.8 lb-ft @ 4600 rpm. The bike has a wet sump lubrication system and Mikuni BST40 induction. It has a steel, single cradle frame and telescopic, leading axle, oil damped front suspension. The front and rear brakes are both two-piston calipers, with the front brake being a single 280mm disc and the rear brake being a single 230mm disc. The front tyre is 90/90-21 and the rear tyre is 120/90-17. The bike has a length of 2255mm, width of 865mm, and height of 1195mm. It has a wheelbase of 1490mm and a seat height of 885mm. The dry weight of the bike is 147kg and it has a fuel capacity of 13 liters. The Suzuki DR 650SE has an average consumption of 5.0 L/100 km and a top speed of 160.6 km/h. It can brake from 60km/h to 0 in 14.7 meters and from 100km/h to 0 in 41.4 meters. The bike is capable of completing the quarter-mile in 14.1 seconds with a top speed of 142.5 km/h.


Technical specifications:

Make Model: Suzuki DR 650SE

Year: 2007 – 08
Engine: Four stroke, single cylinder. SOHC, 4 Valve per cylinder.
Capacity: 644 cc / 39.3 cu in
Bore x Stroke: 100 x 82 mm
Cooling System: Air/oil cooled
Compression Ratio: 9.5:1
Lubrication: Wet sump
Induction: Mikuni BST40
Ignition: Electronic Ignition
Starting: Electric
Max Power: 32 kW / 43.5 hp / @ 6400 rpm (at rear tyre 27.9 kW / 37.4 hp @ 6500 rpm)
Max Torque: 54 Nm / 5.51 kg-m / 39.8 [email protected] 4600 rpm
Clutch: Wet, cable operated
Transmission: 5 Speed
Final Drive: Chain, 525 links
Frame: Steel, single cradle frame
Front Suspension: Telescopic, leading axle, oil damped
Front Wheel Travel: 259 mm / 10.2 in
Rear Suspension: Link-type, fully adjustable spring preload, gas/oil damped, adjustable compression damping
Rear Wheel Travel: 259 mm / 10.2 in
Front Brakes: Single 280 mm disc, 2 piston caliper
Rear Brakes: Single 230 mm disc, 2 piston caliper
Front Tyre: 90/90-21
Rear Tyre: 120/90-17
Dimensions: Length 2255 mm / 88.8 in Width 865 mm / 34.1 in Height 1195 mm / 47.0 in
Wheelbase: 1490 mm / 58.7 in
Seat Height: 885 mm / 34.8 in.
Ground Clearance: 265mm / 10.4 in
Dry Weight: 147 kg /324 lbs
Wet-Weight: 162 kg / 357 lbs
Fuel Capacity: 13 Liter / US 3.4 gal / 2.9 Imp gal (CA model 12 Liter / 3.2 US gal / 2.6 Imp gal)
Consumption Average: 5.0 L/100 km / 20.1 km/l / 47.3 US mpg / 56.8 Imp mpg
Braking 60 km/h – 0: 14.7 m / 48.2 ft
Braking 100 km/h – 0: 41.4 m / 135.8 ft
Standing 1/4 Mile: 14.1 sec / 142.5 km/h / 88.5 mph
Top Speed: 160.6 km/h / 99.8 mph

The post Suzuki DR 650 SE (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Triumph Speedmaster (2007-08) https://motorcyclespecifications.com/triumph-speedmaster-2007-08-specs/ Tue, 04 Apr 2023 23:25:05 +0000 https://motorcyclespecifications.com/?p=44931 The Triumph Speedmaster Roadster was a motorcycle produced in 2007 and 2008. It had a four stroke, parallel twin engine with a capacity of 865cc and a compression ratio of

The post Triumph Speedmaster (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Triumph Speedmaster Roadster was a motorcycle produced in 2007 and 2008. It had a four stroke, parallel twin engine with a capacity of 865cc and a compression ratio of 9.2:1. The cooling system was air-cooled and the induction used two carburetors with a throttle position sensor and electric carburetor heaters. The ignition was digital inductive type and it had an electric starter. The maximum power was 40.3 kW / 54 hp @ 6750 rpm and the maximum torque was 69 Nm / 7.0 kgf-m / 51 ft.-lb @ 4800 rpm. The transmission was a 5-speed and it had chain final drive. The frame was a tubular steel cradle and the swingarm was twin-sided and tubular steel. The front suspension consisted of 41mm Telescopic forks and the rear suspension used chromed spring twin shocks with adjustable preload. The front brakes were 2 x 310 mm discs with 2 piston calipers and the rear brake used a single 285mm disc with a 2 piston caliper. It had a front tire of 110/80-18 and a rear tire of 170/80-15. The seat height was 719mm / 28.3in and the dry weight was 229 kg / 504 lbs. It had a fuel capacity of 16.6 liters / 4.4 US gal / 3.65 Imp gal.


Technical specifications:

Make Model: Triumph Speedmaster Roadster

Year: 2007 – 08
Engine: Four stroke, parallel twin, DOHC, 4 valves per cylinder
Capacity: 865 cc / 52.8 cu in
Bore x Stroke: 90 x 68 mm
Compression Ratio: 9.2:1
Cooling System: Air cooled
Induction: 2 x Carburetors with throttle position sensor and electric carburetor heaters
Ignition: Digital inductive type
Starting: Eectric
Max Power: 40.3 kW / 54 hp @ 6750 rpm
Max Torque: 69 Nm / 7.0 kgf-m / 51 ft.-lb @ 4800 rpm
Transmission: 5 Speed
Final Drive: Chain
Clutch: Wet, multi-plate
Frame: Tubular steel cradle. Swingarm: twin-sided, tubular steel
Front Suspension: 41mm Telescopic forks
Rear Suspension: Chromed spring twin shocks with adjustable preload
Front Brakes: 2 x 310 mm Discs, 2 piston calipers
Rear Brakes: Single 285 mm disc, 2 piston caliper
Front Tyre: 110/80-18
Rear Tyre: 170/80-15
Seat Height: 719 mm / 28.3 in
Dry Weight: 229 kg / 504 lbs
Fuel Capacity: 16.6 Litres / 4.4 US gal / 3.65 Imp gal

The post Triumph Speedmaster (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Husqvarna TE 610ie (2007-08) https://motorcyclespecifications.com/husqvarna-te-610ie-2007-08-specs/ Tue, 04 Apr 2023 22:41:06 +0000 https://motorcyclespecifications.com/?p=44887 The Husqvarna TE 610ie motorcycle was produced between 2007-08 and features a four-stroke, single cylinder, SOHC, 4-valve engine with a capacity of 576cc. It has a liquid-cooled cooling system with

The post Husqvarna TE 610ie (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Husqvarna TE 610ie motorcycle was produced between 2007-08 and features a four-stroke, single cylinder, SOHC, 4-valve engine with a capacity of 576cc. It has a liquid-cooled cooling system with a compression ratio of 11.0:1 and electronic injection for induction. The bike can be started with an electric or kick start and has a maximum power output of 54 hp at 7000 rpm and maximum torque of 52 Nm at 6500 rpm. The clutch is a wet, multiplate type with mechanical control and has a 6-speed transmission with final drive via chain.

The frame is a steel single tube cradle with a rear frame in light alloy, while the front suspension is a 45mm Marzocchi “Upside-Down” telescopic hydraulic fork with advanced axle compression and rebound stroke adjustment. The rear suspension is a Sachs progressive “Soft Damp” type with a single hydraulic shock absorber, spring preload adjustment, and compression and rebound adjustment. The bike has a front single 260mm disc brake and a rear single 220mm disc brake, with a front tyre size of 90/90 -21 and a rear tyre size of 140/80 -18. The wheelbase measures 1497 mm and the seat height is 940 mm, with a dry weight of 139.7 kg and a fuel capacity of 12.5 litres.


Technical specifications:

Make Model: Husqvarna TE 610ie

Year: 2007 – 08
Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 576 cc / 35.2 cu-in
Bore x Stroke: 98.0 x 76.4 mm
Cooling System: Liquid cooled
Compression Ratio: 11.0:1
Induction: Electronic injection
Ignition: CDI Adjustable advance
Starting: Electric & kick
Max Power: 54 hp / 40.3 kW @ 7000 rpm
Max Torque: 52 Nm / 38.4 ft-lb @ 6500 rpm
Clutch: Wet,multiplate type; mechanic control
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st 2.615 (34/13), 2nd 1.812 (29/16), 3rd 1.350 (27/20), 4th 1.091 (24/22), 5th 0.916 (22/24), 6th 0.769 (20/26)
Frame: Steel single tube cradle (round tubes); rear frame in light alloy
Front Suspension: 45mm Marzocchi “Upside-Down” telescopic hydraulic fork with advanced axle. compression and rebound stroke adjustment
Front Wheel Travel: 270 mm / 10.6 in
Rear Suspension: Sachs progressive “Soft Damp” type with single hydraulic shock absorber, spring preload adjustment, compression and rebound adjustment
Rear Wheel Travel: 320 mm / 12.6 in
Front Brakes: Single 260mm disc
Rear Brakes: Single 220mm disc
Front Tyre: 90/90 -21
Rear Tyre: 140/80 -18
Wheelbase: 1497 mm / 58.9 in
Seat Height: 940 mm / 37 in
Dry Weight: 139.7 kg / 309.7 lbs
Fuel Capacity: 12.5 Litres / 3.3 US gal

The post Husqvarna TE 610ie (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Ducati Multistrada 1000S (2007-08) https://motorcyclespecifications.com/ducati-multistrada-1000s-2007-08-specs/ Tue, 04 Apr 2023 22:17:09 +0000 https://motorcyclespecifications.com/?p=44866 The Ducati Multistrada 1000S (2007-08) is a motorbike with a four-stroke, 90 degrees L twin cylinder, DOHC, desmodromic 4 valve per cylinder engine that has a capacity of 1078 cc.

The post Ducati Multistrada 1000S (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Ducati Multistrada 1000S (2007-08) is a motorbike with a four-stroke, 90 degrees L twin cylinder, DOHC, desmodromic 4 valve per cylinder engine that has a capacity of 1078 cc. It has a compression ratio of 10.0:1, an air-cooling system, and uses fuel injection with a 45mm throttle body. The motorcycle has a maximum power of 88 kW / 95 hp @ 7750 rpm and a maximum torque of 102 Nm / 10.4 kgf-m / 75.9 lb-ft @ 4750 rpm. The clutch is a wet multiplate with hydraulic control, and the transmission is 6-speed. The Ducati Multistrada 1000S has a tubular steel trellis frame, Ohlins 43mm fully adjustable upside-down fork with TIN suspension and a progressive linkage with fully adjustable Ohlins monoshock; hydraulic remote preload control on the rear suspension. The front brakes are dual 320mm discs with 4-piston calipers, and the rear brake is a single 245mm disc with a 2-piston caliper. The motorcycle has a 120/70-ZR17 front tire and a 180/55-ZR17 rear tire with a trail of 92mm and a wheelbase of 1462mm. It has a seat height of 850mm, ground clearance of 169mm, dry weight of 196kg and a fuel capacity of 20L. The Ducati Multistrada 1000S can reach a standing 1/4 mile in 12 seconds and has a top speed of 209.7 km/h / 130.3 mph.


Technical specifications:

Make Model: Ducati Multistrada 1100S

Year: 2007 – 08
Engine: Four stroke, 90 degrees L twin cylinder, DOHC, desmodromic 4 valve per cylinder
Capacity: 1078 cc / 65.7 cu-in
Bore x Stroke: 98 x 71.5 mm
Cooling System: Air cooled
Compression Ratio: 10.0:1
Induction: Fuel Injection, 45 mm throttle body
Ignition: Marelli electronic
Starting: Electric
Max Power: 88 kW / 95 hp @ 7750 rpm
Max Torque: 102 Nm / 10.4 kgf-m / 75.9 lb-ft @ 4750 rpm
Clutch: Wet multiplate with hydraulic control
Transmission: 6 Speed
Final Drive: Chain
Frame: Tubular steel trellis
Front Suspension: Ohlins 43 mm fully adjustable upside-down fork with TIN
Front Wheel Travel: 165 mm / 6.4 in
Rear Suspension: Progressive linkage with fully adjustable Ohlins monoshock; hydraulic remote pre-load control. Aluminium single-sided swingarm
Rear Wheel Travel: 141 mm / 4.8 in
Front Brakes: 2 x 320 mm Discs, 4 piston calipers
Rear Brakes: Single 245mm disc, 2 piston caliper
Front Tyre: 120/70 – ZR17
Rear Tyre: 180/55 – ZR17
Trail: 92 mm / 3.6 in
Wheelbase: 1462 mm / 57.6 in
Seat Height: 850 mm / 33.5 in
Ground Clearance: 169 mm / 6.6 in
Dry Weight: 196 kg / 432 lbs
Fuel Capacity: 20 L / 5.3 US gal / 4.4 Imp gal
Standing 1/4 Mile: 12.0 sec
Top Speed: 209.7 km/h / 130.3 mph

The post Ducati Multistrada 1000S (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL 883L Sportster (2007-08) https://motorcyclespecifications.com/harley-davidson-xl-883l-sportster-2007-08-specs/ Tue, 04 Apr 2023 22:04:58 +0000 https://motorcyclespecifications.com/?p=44855 The Harley Davidson XL 883L Sportster was produced between 2007 and 2008. It has a four-stroke V-twin engine with electronic sequential pot fuel injection and digital CDI ignition. The engine

The post Harley Davidson XL 883L Sportster (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL 883L Sportster was produced between 2007 and 2008. It has a four-stroke V-twin engine with electronic sequential pot fuel injection and digital CDI ignition. The engine has a capacity of 883cc, a compression ratio of 8.8:1, and can produce a maximum power output of 68 hp and maximum torque of 74.5 Nm. The bike has a multi-plate clutch with diaphragm spring in oil bath, a 5-speed transmission, and a belt final drive. The bike’s frame is made of mild steel and has a swingarm with rectangular tube sections. The front suspension is made up of 39mm telescopic forks, and the rear suspension is a coil-over, dual-adjustable preload setup. The bike has single 292mm disc brakes with 2-piston calipers in the front and a single 292mm disc brake with a 1-piston caliper in the rear. The wheels have D401F 100/90-19 57H front and D401 150/80B16 71H rear tyres. The bike has a rake of 29.6 degrees, a trail of 117mm, and a wheelbase of 1524.0mm. The length, width, and height of the bike are 2263.14mm, 894.08mm, and 1160.78mm, respectively. The seat height is 642.62mm when laden and 668.02mm when unladen. The bike has a dry weight of 255kg and a wet weight of 264.4kg. The fuel tank has a capacity of 12.5 litres.


Technical specifications:

Make Model: Harley Davidson XL 883L Sportster

Year: 2007 – 08
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 883 cc / 53.9 cub in.
Bore x Stroke: 76.2 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 8.8:1
induction: Electronic Sequential Pot Fuel Injection
Ignition: Digital CDI
Starting: Electric
Max Power: 68 hp / 50.2 kW @ 4400 rpm
Max Torque: 74.5 Nm / 55 lb-ft @ 3500 rpm
Clutch: Multi-plate clutch with diaphragm spring in oil bath
Transmission: 5 Speed
Final Drive: Belt
Gear Ratio: 1st 10.782 2nd 7.702 3rd 5.728 4th 4.748 5th 4.071
Frame: Mild steel, tubular frame, circular sections, cast junctions Swingarm Mild steel, rectangular tube sections, stamped junctions, MIG welded
Front Suspension: 39mm Telescopic forks
Rear Suspension: Coil-over, dual-adjustable preload
Front Brakes: Single 292mm disc 2 piston calipers
Rear Brakes: Single 292mm disc 1 piston caliper
Front Tyre: D401F 100/90-19 57H
Rear Tyre: D401 150/80B16 71H
Rake: 29.6 degrees
Trail: 117 mm / 4.6 in
Dimensions: Length 2263.14 mm / 89.10 in Width 894.08 mm / 35.2 in Height 1160.78 mm /45.7 in
Wheelbase: 1524.0 mm / 60.0 in
Seat Height: Laden2 642.62 mm / 25.3 in Unladen 668.02 mm / 26.3 in
Dry Weight: 255 kg / 563 lbs
Wet Weight: 264.4 kg / 583 lbs
Fuel Capacity: 12.5 Litres / 3.3 US gal

The post Harley Davidson XL 883L Sportster (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Moto Guzzi Griso 1100 (2007-08) https://motorcyclespecifications.com/moto-guzzi-griso-1100-2007-08-specs/ Tue, 04 Apr 2023 19:12:57 +0000 https://motorcyclespecifications.com/?p=44697 The Moto Guzzi Griso 1100 motorcycle was produced between 2007 and 2008. It has a four-stroke, V twin engine that is longitudinally mounted, with a capacity of 1064cc. The bike

The post Moto Guzzi Griso 1100 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Moto Guzzi Griso 1100 motorcycle was produced between 2007 and 2008. It has a four-stroke, V twin engine that is longitudinally mounted, with a capacity of 1064cc. The bike uses Weber-Marelli electronic injection with a stepper motor for its induction, and it has a maximum power of 87 horsepower at 7500 rpm. The Griso 1100 has a six-speed transmission, and its final drive is via a shaft. The frame is a detachable tubular duplex cradle, and the suspension is a 43mm inverted fork fully adjustable in spring preload and compression and rebound damping. The rear suspension is a single-sided swingarm with rising rate linkages, monoshock with separate gas reservoir, also fully adjustable in spring preload and compression and rebound damping. Braking is provided by two 320mm discs with four-piston calipers up front and a single 282mm disc with a two-piston caliper at the rear. The front tire is 120/70 ZR17, and the rear tire is a 180/55 ZR17. The bike has a wheelbase of 1560mm and a seat height of 790mm, with a dry weight of 227kg. The fuel capacity is 17.2 litres or 4.5 US gallons.


Technical specifications:

Make Model: Moto Guzzi Griso 1100

Year: 2007 – 08
Engine: Four stroke, V twin, longitudinally mounted, light alloy push-rod, 2 valves per cylinder.
Capacity: 1064 cc / 64.9 cu-in
Bore x Stroke: 92 x 80 mm
Cooling System: Air cooled
Compression Ratio: 9.8:1
Induction: Weber- Marelli electronic injection with stepper motor
Lubrication: Splash
Ignition: Magneti Marelli IAW electronic digital ignition with twin spark
Starting: Electric
Max Power: 87 hp / 63.4 kW @ 7500 rpm
Max Torque: 89 Nm / 65.6 lb ft @ 6000 rpm
Transmission: 6 Speed
Final Drive: Shaft
Frame: Detachable tubular duplex cradle
Front Suspension: 43 mm upside down fork, fully adjustable in spring preload and compression and rebound damping
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Single sided swingarm with rising rate linkages, monoshock with separate gas reservoir, fully adjustable in spring preload and compression and rebound damping
Rear Wheel Travel: 110 mm / 4.4 in
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 282mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 180/55 ZR17
Trail: 108 mm / 4.3 in
Dimensions: Length 2250 mm / 88.6 in Width 870 mm / 34.2 in
Wheelbase: 1560 mm / 61.4in
Seat Height: 790 mm / 31.1 in
Dry Weight: 227 kg / 504.8 lbs
Fuel Capacity: 17.2 Litres / 4.5 US gal

The post Moto Guzzi Griso 1100 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Buell XB12Scg Lightning (2007-08) https://motorcyclespecifications.com/buell-xb12scg-lightning-2007-08-specs/ Tue, 04 Apr 2023 18:15:08 +0000 https://motorcyclespecifications.com/?p=44645 The Buell XB12Scg Lightning is a motorcycle that was produced between 2007 and 2008. It features a 45-degree V-Twin engine with a capacity of 1203cc and a compression ratio of

The post Buell XB12Scg Lightning (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Buell XB12Scg Lightning is a motorcycle that was produced between 2007 and 2008. It features a 45-degree V-Twin engine with a capacity of 1203cc and a compression ratio of 10.0:1. The engine is air-cooled and has pushrod actuated overhead valves, hydraulic self-adjusting lifters, and 2 valves per cylinder. It has a 5-speed transmission with a final belt drive, and the gear ratios are 1st 2.649, 2nd 1.892, 3rd 1.407, 4th 1.166, and 5th 1.000. The motorcycle has an aluminium frame with a Uniplanar powertrain vibration isolation system and fuel in frame. The rake is 21 degrees, and the trail is 83mm / 3.3 inches. The front suspension has Showa inverted forks with compression damping, rebound damping, and spring preload adjustable. The rear suspension is a Showa coil-over monoshock with a remote under-seat reservoir and adjustable compression damping, rebound damping, and spring preload. The front brakes are ZTL type brakes with a 6-piston fixed caliper, a single-sided, inside-out, stainless steel, floating rotor, and a diameter of ~A375mm. The rear brakes are a single ~A240mm disc with a 1 piston floating caliper. The wheels are 6-spoke, ZTL cast aluminium with a front wheel size of 3.50 x 17 inches and a rear wheel size of 5.50 x 17 inches. The length is 1935 mm / 76.2 inches, the width is 754 mm / 29.7 inches, the wheelbase is 1320 mm / 52.0 inches, the ground clearance is 110 mm / 4.4 inches, the seat height is 726 mm / 28.6 inches, and the dry weight is 179 kg / 395 lbs. The fuel capacity is 14 L / 3.7 US gal, and the fuel reserve is 2.8 L / 0.75 US gal. The standing 1/4 mile is 12.2 sec, and the top speed is 216.2 km/h / 134 mph.


Technical specifications:

Make Model: Buell XB12Scg Lightning

Year: 2007 – 08
Engine: 45 degrees V-Twin, four stroke, pushrod actuated overhead valve. hydraulic self-adjusting lifters, 2 valve per cylinder.
Capacity: 1203 cc / 73 cu in
Bore x Stroke: 88.9 x 96.8 mm
Compression Ratio: 10.0:1
Cooling System: Air cooled
Lubrication: Dry sump
Exhaust: Free breathing, 2-into-1 Tuned, tri-pass resonance chamber with InterActive valve and mass-centralized mounting
Induction: ~A49 mm downdraft DDFI II fuel injection
Starting: Electric
Max Power: 86.9 kW / 103 hp @ 6800 rpm
Max Torque: 114 Nm / 11.6 kgf-m / 84 ft-lbs @ 6000 rpm
Clutch: Wet, multi-plate
Transmission: 5 Speed
Final Drive: Belt
Gear Ratios: 1st 2.649 / 2nd 1.892 / 3rd 1.407 / 4th 1.166 / 5th 1.000
Frame: Aluminium frame with Uniplanar c Powertrain vibration isolation system, fuel in frame
Rake: 21 degrees
Trail: 83 mm / 3.3″
Front Suspension: Showa ~A43 mm inverted forks compression damping, rebound damping and spring preload adjustable
Front Wheel Travel: 120 mm / 4.7″
Rear Suspension: Showa coil-over monoshock, remote underseat reservoir and adjustable compression damping, rebound damping and spring preload,
Rear Wheel Travel: 127 mm / 5.0″
Front Brakes: ZTL type brake, 6 piston, fixed caliper, ~A375 mm single-sided, inside out, stainless steel, floating rotor
Rear Brakes: Single ~A240 mm disc, 1 piston floating caliper
Wheels: 6-Spoke, ZTL cast aluminium
Front Wheel: 3.50 x 17″
Rear Wheel: 5.50 x 17″
Front Tyre: 120/70 ZR17 Pirelli
Rear Tyre: 180/55 ZR17 Pirelli
Dimensions: Length: 1935 mm / 76.2″ Width: 754 mm / 29.7″
Wheelbase: 1320 mm / 52.0″
Ground Clearance: 110 mm / 4.4″
Seat Height: 726 mm / 28.6″
Dry Weight: 179 kg / 395 lbs
GVWR: 386 kg / 850 lbd
Fuel Capacity: 14 L / 3.7 US gal
Fuel Reserve: 2.8 L / 0.75 US gal
Oil Capacity: 2.37 L / 2.50 qts
Standing 1/4 Mile: 12.2 sec
Top Speed: 216.2 km/h / 134 mph

The post Buell XB12Scg Lightning (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Triumph Thruxton 900 (2007-08) https://motorcyclespecifications.com/triumph-thruxton-900-2007-08-specs/ Tue, 04 Apr 2023 15:32:05 +0000 https://motorcyclespecifications.com/?p=44492 The Triumph Thruxton motorcycle was produced in 2007 and 2008. It has a four-stroke, parallel twin-cylinder, DOHC engine with a capacity of 865 cc. The engine is air-cooled and has

The post Triumph Thruxton 900 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Triumph Thruxton motorcycle was produced in 2007 and 2008. It has a four-stroke, parallel twin-cylinder, DOHC engine with a capacity of 865 cc. The engine is air-cooled and has a compression ratio of 9.9:1. The bike uses twin carburetors with throttle position sensors and electric carburetor heaters for induction, and has digital ignition. The bike has a wet sump lubrication system that requires synthetic 15W/50 engine oil. It has a maximum power output of 51.5 kW or 69 hp at 7250 rpm and a maximum torque of 71.8 Nm or 53 ft-lb at 5750 rpm. The clutch is wet and multi-plate, and the transmission has five speeds. The bike has a tubular steel cradle frame, and a twin-sided swingarm with tubular steel. It has 41mm front forks and chromed spring twin shocks with adjustable preload at the rear. The front brakes consist of a single 320mm floating disc with a two-piston caliper, while the rear brakes use a single 255mm disc with a two-piston caliper. The front wheel has 36 spokes and a dimension of 18 x 2.5 inches, while the rear wheel has 40 spokes and a dimension of 17 x 3.5 inches. The bike has a seat height of 790mm, a dry weight of 205kg, and a fuel capacity of 16 liters. It consumes an average of 5.2 L/100 km and has a top speed of 185 km/h or 115 mph.


Technical specifications:

Make Model: Triumph Thruxton

Year: 2007 – 08
Engine: Four stroke, parallel twin cylinder, DOHC, 4 valves per cylinder
Capacity: 865 cc / 57.8 cu in
Bore x Stroke: 88.9 x 68.6 mm
Cooling System: Air-cooled
Compression Ratio: 9.9:1
Lubrication: Wet sump
Engine Oil: Synthetic, 15W/50
Induction: Twin carburetors, with throttle position sensor and electric carburettor heaters
Ignition: Digital
Spark Plug: NGK, DPR8EA-9
Starting: Electric
Max Power: 51.5 kW / 69 hp @ 7250 rpm
Max Torque: 71.8 Nm / 7.3 kgf-m / 53ft.lbf @ 5750 rpm
Clutch: Wet, multi-plate
Transmission: 5 speed
Final Drive: X-ring chain
Frame: Tubular steel cradle, twin sided swingarm, tubular steel
Front Suspension: 41 mm Forks with adjustable preload
Rear Suspension: Chromed spring twin shocks with adjustable preload
Front Brakes: Single 320mm floating disc, 2 piston caliper
Rear Brakes: Single 255mm disc, 2 piston caliper
Wheels Front: 36-spoke, 18 x 2.5 in
Wheels Rear: 40-spoke, 17 x 3.5 in
Front Tyre: 100/90 R18
Rear Tyre: 130/80 R17
Rake: 26 degrees
Trail: 97 mm / 3.8 in
Dimensions: Length 2212 mm / 87.1 in Width 714 mm / 28.1 in Handlebars Height 1170 mm / 46.4 in
Wheelbase: 1477 mm / 58.1 in
Seat Height: 790 mm / 31.1 in
Dry Weight: 205 kg / 451 lbs
Fuel Capacity: 16 Litres / 4.2 US gal / 3.5 Imp gal
Consumption Average: 5.2 L/100 km / 19.1 km/l / 45 US mpg / 54 Imp mpg
Standing 1/4 Mile: 13.2 sec
Top Speed: 185 km/h / 115 mph

The post Triumph Thruxton 900 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Derbi Senda Terra 125 (2007-08) https://motorcyclespecifications.com/derbi-senda-terra-125-2007-08-specs/ Tue, 04 Apr 2023 13:13:04 +0000 https://motorcyclespecifications.com/?p=44363 The Derbi Senda Terra 125 is a lightweight off-road motorcycle with a four-stroke, single cylinder OHC engine and a 124cc capacity. It has a compression ratio of 11.0:1 and uses

The post Derbi Senda Terra 125 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Derbi Senda Terra 125 is a lightweight off-road motorcycle with a four-stroke, single cylinder OHC engine and a 124cc capacity. It has a compression ratio of 11.0:1 and uses electronic ignition. The bike has a maximum power output of 9 kW at 6,500rpm and 9 Nm of torque at the same speed. The clutch is a multiplate system and it has a five-speed transmission. With a tubular steel frame and telescopic forks in the front, the bike can handle travel of 150mm across both the front and rear suspension. The braking system utilizes single discs for both the front and rear with a 280mm disc on the front and a 220mm disc on the rear. The Derbi Senda Terra 125 runs on 100/90-18 front and 130/80-17 rear tires, with a seat height of 815mm and a dry weight of 117kg. The motorcycle can hold 12 liters of fuel in its tank which has a capacity of 3.1 US gal.


Technical specifications:

Make Model: Derbi Senda Terra 125

Year: 2007 – 08
Engine: Four stroke, single cylinder. OHC
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 56 x 49 mm
Cooling System: Air cooled
Compression Ratio: 11.0:1
Induction: 22mm Keihin
Ignition: Electronic
Starting: Electric
Max Power: 9 kW / 12 hp @ 6500 rpm
Max Torque: 9 Nm / 6.6 lb-ft @ 6500 rpm
Clutch: Multiplate
Transmission: 5 Speed
Final Drive: Chain
Frame: Tubular steel frame
Front Suspension: 37mm Telescopic forks
Front Wheel Travel: 150 mm / 5.9 in
Rear Suspension: Paoli monoshock
Rear Wheel Travel: 150 mm / 5.9 in
Front Brakes: Single 280mm disc
Rear Brakes: Single 220mm disc
Front Tyre: 100/90- 18
Rear Tyre: 130/80- 17
Seat Height: 815 mm / 32.0 in
Dry Weight: 117 kg / 258 lbs
Fuel Capacity: 12 Litres / 3.1 US gal

The post Derbi Senda Terra 125 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson FLHT Electra Glide Standard (2007-08) https://motorcyclespecifications.com/harley-davidson-flht-electra-glide-standard-2007-08-specs/ Tue, 04 Apr 2023 12:23:04 +0000 https://motorcyclespecifications.com/?p=44318 The Harley Davidson FLHT Electra Glide Standard was released in 2007 and continued production until 2008. It features a four-stroke, 45-degree V-twin, Twin Cam 96 engine with a capacity of

The post Harley Davidson FLHT Electra Glide Standard (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson FLHT Electra Glide Standard was released in 2007 and continued production until 2008. It features a four-stroke, 45-degree V-twin, Twin Cam 96 engine with a capacity of 1584 cc / 96 cu-in. The engine is air-cooled and has pushrod-operated overhead valves with hydraulic self-adjusting lifters and two valves per cylinder. The motorcycle has a compression ratio of 9.2:1 and is equipped with electronic sequential port fuel injection (ESPFI) for induction. The ignition system is single-fire, non-wasted, and map-controlled spark ignition. The motorcycle has six-speed transmission and a belt final drive. The chassis of the bike is made of mild steel and has a square-section backbone with twin downtubes. The front suspension has a 41.3 mm telescopic, cartridge-style damping system while the rear suspension is a short, air-adjustable shock system. The bike has 2x 292mm disc 4 piston caliper front brakes and a single 292mm disc 4 piston caliper rear brake. The front tyre size is MT90B16 while the rear tyre size is MU85B16. The rake of the bike is 26 degrees and the fork angle is 29.3 degrees. The motorcycle has a ground clearance of 130mm / 5.1in and a dry weight of 335kg / 743 lbs. It has a fuel capacity of 18.9 litres / 5.0 US gal.


Technical specifications:

Make Model: Harley Davidson FLHT Electra Glide Standard

Year: 2007 – 08
Engine: Four stroke, 45 degrees V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder
Capacity: 1584 cc / 96 cu-in
Bore x Stroke: 95.2 x 111.2 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starring: Electric
Max Torque: 124.7 Nm / 92 ft. lbs @ 3000 rpm
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.312 9.312 9.312 2nd 6.421 6.421 6.421 3rd 4.774 4.774 4.774 4th 3.926 3.926 3.926 5th 3.279 3.279 3.279 6th 2.790 2.790 2.790
Frame: Mild steel, square-section backbone with twin downtubes
Front Suspension: 41.3 mm telescopic, cartridge-style damping
Rear Suspension: Short, air-adjustable shock
Front Brakes: 2x 292mm disc 4 piston caliper
Rear Brakes: Single 292mm disc 4 piston caliper
Front Tyre: MT90B16
Rear Tyre: MU85B16
Rake: 26 degrees
Fork Angle: 29.3 degrees
Trail: 157.5 mm / 6.2 in
Dimensions: Length 2380.0 mm / 93.7 in width 990.6 mm / 39.0 in Height 1549.4 mm / 61.0 in
Wheelbase: 1613 mm / 63.5 in
Seat Height: Laden2 693.4 mm / 27.3 in Unladen 779.8 mm / 27.3 in
Ground Clearance: 130 mm / 5.1 in
Dry Weight: 335 kg / 743 lbs
Fuel Capacity: 18 9 Litres / 5.0 US gal

The post Harley Davidson FLHT Electra Glide Standard (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Kawasaki ZR (2007-08) https://motorcyclespecifications.com/kawasaki-zr-2007-08-specs/ Tue, 04 Apr 2023 09:47:03 +0000 https://motorcyclespecifications.com/?p=44173 The Kawasaki ZR-X 400 is a motorcycle that was produced between 2007 and 2008. It has a four-stroke, parallel twin-cylinder engine with a capacity of 399cc, and features liquid cooling

The post Kawasaki ZR (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Kawasaki ZR-X 400 is a motorcycle that was produced between 2007 and 2008. It has a four-stroke, parallel twin-cylinder engine with a capacity of 399cc, and features liquid cooling and a compression ratio of 11.2:1. The motorcycle is fitted with 4x Keihin CVK30 carburetors and transistor ignition. With a maximum power output of 53 horsepower at 11500 rpm, and a maximum torque of 37 Nm at 9000 rpm, the bike is capable and responsive. It has a wet multi-disc clutch, a six-speed transmission, and a chain final drive. The front suspension uses 39mm RWU telescopic forks, while the rear suspension has dual shocks with preload adjustment. The front brakes use 2x 298mm discs and 6-piston calipers, while the rear brakes use a single 240mm disc and 2-piston caliper. The front and rear tyres are 110/80-17 and 150/70-18 respectively. The bike has a wheelbase of 1450mm, a seat height of 780mm, and a ground clearance of 120mm. The dry weight of the motorcycle is 186kg, and it has a fuel capacity of 16 litres. Overall, the Kawasaki ZR-X 400 is a capable and responsive motorcycle that is well-suited for a range of riding styles.


Technical specifications:

Make Model: Kawasaki ZR-X 400

Year: 2007 – 08
Engine: Four stroke parallel twin cylinder. DOHC, 2 valves per cylinder
Capacity: 399 cc / 24.4 cu-in
Bore x Stroke: 57.5 38.5 mm
Cooling System: Liquid cooled
Compression Ratio: 11.2:1
Induction: 4x Keihin CVK30 carburetors
Ignition: Transistor
Starting: Electric
Max Power: 53 hp / 39.5 kW @ 11500 rpm
Max Torque: 37 Nm / 27.3 lb-ft @ 9000 rpm
Clutch: Wet multi disc
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 39mm RWU telescopic forks
Rear Suspension: Dual shocks preload adjustment
Front Brakes: 2x 298mm discs 6 piston calipers
Rear Brakes: Single 240mm disc 2 piston caliper
Front Tyre: 110/80-17
Rear Tyre: 150/70-18
Wheelbase: 1450 mm / 57.1 in
Seat Height: 780 mm / 30.7 in
Ground Clearance: 120 mm / 4.7 in
Dry Weight: 186 kg / 410.1 lbs
Fuel Capacity: 16 Litres / 4.2 US gal

The post Kawasaki ZR (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Suzuki Boulevard C90 SE (2007-08) https://motorcyclespecifications.com/suzuki-boulevard-c90-se-2007-08-specs/ Tue, 04 Apr 2023 08:19:11 +0000 https://motorcyclespecifications.com/?p=44092 The Suzuki Boulevard C90 SE motorcycle was produced between 2007 and 2008. It features a four-stroke, 45-degree V-twin engine with a capacity of 1462cc and a compression ratio of 8.5:1.

The post Suzuki Boulevard C90 SE (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Suzuki Boulevard C90 SE motorcycle was produced between 2007 and 2008. It features a four-stroke, 45-degree V-twin engine with a capacity of 1462cc and a compression ratio of 8.5:1. It is fuel injected and has a digital transistorized ignition with electric start. The maximum power is 49.2 kW or 66 hp at 4800 rpm, while the maximum torque is 115 Nm or 84.8 ft-lbs at 2800 rpm. The frame is a double cradle steel frame, while the transmission has five speeds and the final drive is shaft-driven. The front suspension is telescopic, coil spring, and oil damped, while the rear suspension is link-type, coil spring and oil-damped. It has dual 300mm disc brakes with four-piston calipers at the front and a single 180mm disc brake with a two-piston caliper at the rear. The front tire is 150/80-R16, while the rear tire is 180/70-R15. The motorcycle has a length of 2525mm, a height of 1030mm and a width of 1000mm. The wheelbase is 1700mm, the ground clearance is 140mm, and the seat height is 700mm. The dry weight of the bike is 302kg, and the fuel capacity is 14 litres or 3.7 US gallons. The standing 1/4 mile of the motorcycle is 15.0 seconds, reaching a speed of 138km/h or 85.7mph.


Technical specifications:

Make Model: Suzuki Boulevard C90 SE

Year: 2007 – 08
Engine: Four stroke, 45 degrees V-twin, SOHC, 3 valves per cylinder
Capacity: 1462 cc / 89.2 cu-in
Bore x Stroke: 96 x 101 mm
Cooling System: Air/oil cooled
Compression Ratio: 8.5:1
Lubrication: Wet sump
Induction: Fuel injected
Ignition: Digital transistorized
Starting: Electric
Max Power: 49.2 kW / 66 hp @ 4800 rpm
Max Torque: 115 Nm /11.7 kgf-m / 84.8 ft-lbs @ 2800 rpm
Frame: Double cradle steel frame
Transmission: 5 Speed
Final Drive: Shaft
Front Suspension: Telescopic, coil springs, oil damped
Rear Suspension: Link type, coil spring, oil damped
Front Brakes: Dual 300 mm disc, 4 piston caliper
Rear Brakes: Single 180 mm disc, 2 piston caliper
Front Tyre: 150/80-R16
Rear Tyre: 180/70-R15
Rake: 32 degrees
Dimensions: Length: 2525 mm / 99.4 in Width: 1000 mm / 39.4 in Height: 1030 mm / 40.6 in
Wheelbase: 1700 mm / 66.9 in
Ground Clearance: 140 mm / 5.5 in
Seat Height: 700 mm / 27.6 in
Dry Weight: 302 kg / 665 lbs.
Fuel Capacity: 14 Litres / 3.7 US gal
Standing 1/4 Mile: 15.0 sec / 138 km/h / 85.7 mph

The post Suzuki Boulevard C90 SE (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Victory Hammer S (2007-08) https://motorcyclespecifications.com/victory-hammer-s-2007-08-specs/ Tue, 04 Apr 2023 07:51:13 +0000 https://motorcyclespecifications.com/?p=44066 The Victory Hammer S motorcycle was produced from 2007-08 with a four-stroke 50-degree V twin SOHC engine and a capacity of 1634 cc/100 cu-in. The compression ratio was 9.8:1 and

The post Victory Hammer S (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Victory Hammer S motorcycle was produced from 2007-08 with a four-stroke 50-degree V twin SOHC engine and a capacity of 1634 cc/100 cu-in. The compression ratio was 9.8:1 and it had electronic fuel injection with 44mm throttle bodies. It utilized a carbon fiber reinforced belt for its final drive and came with an inverted cartridge telescopic fork for its front suspension and a single mono-tube gas forged and cast aluminum rear suspension with rising-rate linkage. The front brakes were 2x 300mm floating rotor 4 piston calipers while the rear had a single 300mm floating rotor 2 piston caliper. The dimensions were 93.1 inches in length, a wheelbase of 1669mm/65.7in, and a seat height of 660mm/26in. It had a dry weight of 305kg/672lbs and a fuel capacity of 17 liters/4.5 US gallons.


Technical specifications:

Make Model: Victory Hammer S

Year: 2007 – 08
Engine: Four stroke, 50 degrees V twin SOHC, 4 valves per cylinder
Capacity: 1634 cc / 100 cu-in
Bore x Stroke: 101 x 102 mm
Cooling System: Air / oil
Compression Ratio: 9.8:1
Induction: Electronic Fuel Injection with 44mm throttle bodies
Starting: Electric
Battery: 12 volts / 18 amp hours
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Carbon Fiber Reinforced Belt
Front Suspension: 43mm Inverted cartridge telescopic fork
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: 2x 300mm floating rotor 4 piston caliper
Rear Brakes: Single 300mm floating rotor 2 piston caliper
Front Wheel: 18 x 3.5 in
Rear Wheel: 18 x 8.5 in
Front Tyre: 130/70 R18
Rear Tyre: 250/40 R18
Rake: 32.7 degrees
Trail: 140 mm / 5.5 in
Dimensions: Length 93.1 in / 2,366 mm
Wheelbase: 1669 mm / 65.7 in
Seat Height: 660 mm / 26 in
Ground Clearance: 135 mm / 5.3 in
Dry Weight: 305 kg / 672 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Victory Hammer S (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson FLHR Road King (2007-08) https://motorcyclespecifications.com/harley-davidson-flhr-road-king-2007-08-specs/ Tue, 04 Apr 2023 07:22:58 +0000 https://motorcyclespecifications.com/?p=44041 The Harley Davidson FLHR Road King motorcycle was produced between 2007-08 with a 1584cc four-stroke, V-twin, Twin Cam 96 engine. The engine has a compression ratio of 9.2:1 and is

The post Harley Davidson FLHR Road King (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson FLHR Road King motorcycle was produced between 2007-08 with a 1584cc four-stroke, V-twin, Twin Cam 96 engine. The engine has a compression ratio of 9.2:1 and is equipped with electronic sequential port fuel injection and a single-fire, non-wasted map-controlled spark ignition system. The bike is started via an electric starter and has a maximum torque of 124.7 Nm @ 3000 rpm. The transmission is a 6-speed with a final drive belt. The frame is made of mild steel and has a square-section backbone with twin downtubes, while the front suspension is a 41.3 mm telescopic, cartridge-style damping and the rear suspension is a short, air-adjustable shock. The motorcycle has two front brakes and a single rear brake with a size of 292mm each and 4 piston calipers. The bike has MT90 B16 and MU85 B16 tyres, and a seating height of 673mm laden and 711mm unladen. The ground clearance is 129.5mm with a wet weight of 368.3 kg and fuel tank capacity of 22.7 litres.


Technical specifications:

Make Model: Harley Davidson FLHR Road King

Year: 2007 – 08
Engine: Four stroke, 45 degrees V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder
Capacity: 1584 cc / 96 cu-in
Bore x Stroke: 95.2 x 111.2 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starring: Electric
Max Torque: 124.7 Nm / 92 ft. lbs @ 3000 rpm
Transmission: 6 Speed
Final Drive: Belt
Gear Ratio: 1st 9.593 2nd 6.65 3rd 4.938 4th 4 5th 3.407 6th 2.875
Frame: Mild steel, square-section backbone with twin downtubes
Front Suspension: 41.3 mm telescopic, cartridge-style damping
Rear Suspension: Short, air-adjustable shock
Front Brakes: 2x 292mm disc 4 piston caliper
Rear Brakes: Single 292mm disc 4 piston caliper
Front Tyre: MT90 B16
Rear Tyre: MU85 B16
Rake Steering Head: 26 degrees
Fork Angle: 29.2 degrees
Trail: 170 mm / 6.7 in
Dimensions: Length 2413.0 mm / 95.0 in Width 949.96 mm / 37.4 in Height 1399.54 mm / 55.1 in
Wheelbase: 1290 mm / 63.5 in
Seat Height: Laden 673 mm / 26.5 in Unladen 711 mm / 28.0 in.
Ground Clearance: 129.5 mm / 5.1 in
Wet Weight: 368.3 kg / 812 lbs
Fuel Capacity: 22.7 Litres / 6.0 US gal

The post Harley Davidson FLHR Road King (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson XL1200R Sportster Roadster (2007-08) https://motorcyclespecifications.com/harley-davidson-xl1200r-sportster-roadster-2007-08-specs/ Tue, 04 Apr 2023 06:45:07 +0000 https://motorcyclespecifications.com/?p=44006 The Harley Davidson XL1200R Sportster Roadster was manufactured between 2007 and 2008. It has a four-stroke, 45 degrees V-twin Evolution engine that can hold up to 1199cc or 73.2 cubic

The post Harley Davidson XL1200R Sportster Roadster (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson XL1200R Sportster Roadster was manufactured between 2007 and 2008. It has a four-stroke, 45 degrees V-twin Evolution engine that can hold up to 1199cc or 73.2 cubic inches, with a bore x stroke of 88.8 x 96.8 mm. The bike is air-cooled and has a compression ratio of 9.7:1. The lubrication system is dry-sump, and it has an Electronic Sequential Port Fuel Injection (ESPFI) induction. The ignition system is a digital CDI with electric start.

The motorcycle has a wet nine-plate clutch and a five-speed transmission, with a belt final drive and chain primary drive with a 57/38 ratio. The gear ratio varies in each gear. The bike is made from a mild steel, tubular frame with circular sections and cast junctions.

It has a front suspension of 39mm forks and a rear suspension of a coil-over, dual-adjustable preload system. The front brakes feature a single 292mm disc and two-piston calipers, while the rear brake uses a single 292mm disc and one-piston caliper. The front tyre size is 100/90-19 57H, while the rear is 150/80B16 71H.

The bike’s rake is 29.6 degrees, and the trail is 117 mm/4.6 in. The motorcycle’s dimensions are 2288.5 mm/90.1 in in length, 932.2 mm/36.7 in in width, and 1249.7 mm/49.2 in in height, with a wheelbase of 1524.0 mm/60.0 in. The seat height is 713.7 mm/28.1 in when laden and 759.5 mm/29.9 in when unladen. The ground clearance is 141 mm/5.6 in. The bike’s dry weight is 256 kg/565 lbs, and its wet weight is 265 kg/585 lbs. The fuel capacity is 12.5 litres/3.3 US gal.


Technical specifications:

Make Model: Harley Davidson XL 1200R Sportster Roadster

Year: 2007 – 08
Engine: Fur stroke, 45 degrees V-Twin Evolution (R) Valve Train Pushrod-operated, OHV, 2 valves per cylinder
Capacity: 1199 cc / 73.2 cu-in
Bore x Stroke: 88.8 x 96.8 mm
Cooling System: Air cooled
Compression Ratio: 9.7:1
Lubrication: Dry-sump
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Digital CDI
Starting: Electric
Max Torque: 107.3 Nm / 79 lb-ft @ 4000 rpm
Clutch: Wet 9-plate
Transmission: 5 Speed
Final Drive: Belt
Primary Drive: Chain, 57/38 ratio
Gear Ratio: 1st 9.315 9.004 9.004 2nd 6.653 6.432 6.432 3rd 4.948 4.783 4.783 4th 4.102 3.965 3.965 5th 3.517 3.400 3.400
Frame: Mild steel, tubular frame, circular sections, cast junctions Swingarm Mild steel rectangular tube sections, stamped junctions, MIG welded
Front Suspension: 39mm Forks
Rear Suspension: Coil-over, dual-adjustable preload
Front Brakes: Single 292mm disc 2 piston calipers
Rear Brakes: Single 292mm disc 1 piston calipers
Front Tyre: 100/90-19 57H
Rear Tyre: 150/80B16 71H
Rake: 29.6 degrees
Fork Angle: 29.6 degrees
Trail: 117 mm / 4.6 in
Dimensions: Length 2288.5 mm / 90.1 in Width 932.2 mm / 36.7 in Height 1249.7 mm / 49.2 in
Wheelbase: 1524.0 mm / 60.0 in
Seat Height: Laden2 713.7 mm / 28.1 in Unladen 759.5 mm / 29.9 in
Ground Clearance: 141 mm / 5.6 in
Dry Weight: 256 kg / 565 lbs
Wet Weight: 265 kg / 585 lbs
Fuel Capacity: 12.5 Litres / 3.3 US gal

The post Harley Davidson XL1200R Sportster Roadster (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Honda FMX 650 (2007-08) https://motorcyclespecifications.com/honda-fmx-650-2007-08-specs/ Tue, 04 Apr 2023 05:39:04 +0000 https://motorcyclespecifications.com/?p=43945 The Honda FMX 650 Supermoto is a motorcycle produced in 2007-08. It has a four-stroke single-cylinder SOHC engine with a capacity of 644 cc and a compression ratio of 8.3:1.

The post Honda FMX 650 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Honda FMX 650 Supermoto is a motorcycle produced in 2007-08. It has a four-stroke single-cylinder SOHC engine with a capacity of 644 cc and a compression ratio of 8.3:1. The ignition is provided by a capacitor discharge and it has an electric starting system. The bike has a maximum power of 39.4 hp at 5750 rpm and a maximum torque of 52.3 Nm at 4500 rpm. The transmission provides five speeds and a final drive chain. The frame is a single cradle mono-backbone with steel tubes. The front suspension uses 45mm inverted leading-axle telescopic forks with 218mm travel and the rear suspension uses a Pro-Link mono-shock with swingarm and 186mm travel. The front brake has a single 296mm disc and a two-piston caliper while the rear brake has a single 220mm disc with a one-piston caliper. The bike has a length of 2150mm, width 840mm and a height of 1170mm with a wheelbase of 1490mm. The dry weight of the bike is 163 kg while the wet weight is 176 kg with a fuel capacity of 11 litres. The Honda FMX 650 Supermoto has a top speed of 148.6 km/h and can travel from 0-1000 m in 30.6 seconds and quarter-mile in 15.1 seconds at 132.5 km/h. The bike has a standing 1000 km/lit consumption average.


Technical specifications:

Make Model: Honda FMX 650 Supermoto

Year: 2007-08
Engine: Four stroke, single cylinder, SOHC,
Capacity: 644 cc / 39.3 cu-in
Bore x Stroke: 100 X 82 mm
Cooling System: Air cooled
Compression Ratio: 8.3:1
Induction: Single 40mm Keihin VE-type carb.
Ignition: Capacitor Discharge
Starting: Electric
Max Power: 39.4 hp / 28.7 kW @ 5750 rpm
Max Torque: 52.3 Nm / 5.33 kg-m @ 4500 rpm
Transmission: 5 Speed
Final Drive: Chain
Frame: Single Cradle Mono-Backbone; Steel tube
Front Suspension: 45mm Inverted leading-axle telescopic fork
Front Wheel Travel: 218 mm / 8.5 in
Rear Suspension: Pro-Link mono shock, Swingarm
Rear Wheel Travel: 186 mm / 7.3 in
Front Brakes: Single 296mm disc 2 piston caliper
Rear Brakes: Single 220mm disc 1 piston caliper
Front Tyre: 120/70 R17
Rear Tyre: 150/60 R17
Rake: 29 degrees
Trail: 97 mm / 3.8 in
Dimensions: Length 2150 mm / 84.6 in Width 840 mm / 33.0 in Height 1170 mm / 46.0 in
Wheelbase: 1490 mm / 58.6 in
Seat Height: 875 mm / 34.4 in
Ground Clearance: 216 mm / 8.5 in
Dry Weight: 163 kg / 359.35 lbs
Wet Weight: 176 kg / 388.0 lbs
Fuel Capacity: 11 Litres / 2.9 gal
Consumption Average: 21.1 km/lit
Standing 1/4 Mile: 15.1 sec / 132.5 km/h
Standing 0-1000 m: 30.6 sec / 1436 km/h
Top Speed: 148.6 km/h

The post Honda FMX 650 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Suzuki Boulevard C90 (2007-08) https://motorcyclespecifications.com/suzuki-boulevard-c90-2007-08-specs/ Tue, 04 Apr 2023 04:49:13 +0000 https://motorcyclespecifications.com/?p=43899 The Suzuki Boulevard C90 (also known as Intruder C1500) was produced between 2007 and 2008. It has a four-stroke, 45 degrees V-twin, SOHC engine with a capacity of 1462 cc.

The post Suzuki Boulevard C90 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Suzuki Boulevard C90 (also known as Intruder C1500) was produced between 2007 and 2008. It has a four-stroke, 45 degrees V-twin, SOHC engine with a capacity of 1462 cc. The bore and stroke are 96 x 101 mm, and the compression ratio is 8.5:1. The bike is fuel-injected and has electronic ignition. It has an electric starter and produces a maximum power of 49.2 kW (66 hp) at 4800 rpm and 115 Nm (84.8 ft-lbs) of torque at 2800 rpm.

The frame is made of double cradle steel, and it has a 5-speed transmission with a shaft final drive. The front suspension is telescopic, coil springs, and oil-damped, while the rear suspension is link-type, coil spring, and oil-damped. The bike has dual 300 mm disc brakes with a 4-piston caliper on the front, and a single 180 mm disc brake with a 2-piston caliper on the rear. The front tire has the dimensions of 150/80-R16, while the rear tire is 180/70-R15. The rake angle is 32 degrees, and the bike’s length, width, and height are 2525 mm, 1000 mm, and 1030 mm, respectively. The wheelbase is 1700 mm, and the ground clearance is 140 mm. The seat height is 700 mm, and the dry weight of the bike is 302 kg. The fuel tank capacity is 14 liters. The standing 1/4 mile can be completed in 15.0 seconds at speeds of 138 km/h (85.7 mph).


Technical specifications:

Make Model: Suzuki Boulevard C90 / Intruder C1500

Year: 2007 – 08
Engine: Four stroke, 45 degrees V-twin, SOHC, 3 valves per cylinder
Capacity: 1462 cc / 89.2 cu-in
Bore x Stroke: 96 x 101 mm
Cooling System: Air/oil cooled
Compression Ratio: 8.5:1
Lubrication: Wet sump
Induction: Fuel injected
Ignition: Digital transistorized
Starting: Electric
Max Power: 49.2 kW / 66 hp @ 4800 rpm
Max Torque: 115 Nm /11.7 kgf-m / 84.8 ft-lbs @ 2800 rpm
Frame: Double cradle steel frame
Transmission: 5 Speed
Final Drive: Shaft
Front Suspension: Telescopic, coil springs, oil damped
Rear Suspension: Link type, coil spring, oil damped
Front Brakes: Dual 300 mm disc, 4 piston caliper
Rear Brakes: Single 180 mm disc, 2 piston caliper
Front Tyre: 150/80-R16
Rear Tyre: 180/70-R15
Rake: 32 degrees
Dimensions: Length: 2525 mm / 99.4 in Width: 1000 mm / 39.4 in Height: 1030 mm / 40.6 in
Wheelbase: 1700 mm / 66.9 in
Ground Clearance: 140 mm / 5.5 in
Seat Height: 700 mm / 27.6 in
Dry Weight: 302 kg / 665 lbs.
Fuel Capacity: 14 Litres / 3.7 US gal / 3.1 Imp gal
Standing 1/4 Mile: 15.0 sec / 138 km/h / 85.7 mph

The post Suzuki Boulevard C90 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
KTM 250 EXC Enduro (2007-08) https://motorcyclespecifications.com/ktm-250-exc-enduro-2007-08-specs/ Tue, 04 Apr 2023 04:18:57 +0000 https://motorcyclespecifications.com/?p=43872 The KTM 250 EXC Enduro motorcycle was produced between 2007 and 2008, with a two-stroke, single-cylinder engine of 249.5cc capacity and a compression system of 12.8:1. It features a liquid-cooled

The post KTM 250 EXC Enduro (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The KTM 250 EXC Enduro motorcycle was produced between 2007 and 2008, with a two-stroke, single-cylinder engine of 249.5cc capacity and a compression system of 12.8:1. It features a liquid-cooled cooling system, pressure circulation lubrication with 2 rotor pumps, and a Keihin MX FCR 39 carburetor for induction. The bike has a 6-speed transmission with wet, multiplate, hydraulically operated clutch, and a chain final drive ratio of 13:52. The central chrome-moly-steel frame, front suspension of WP Suspension 4860 MXMA / MXMA + PA, and rear suspension of WP Suspension 5018 PDS MCC / DCC, aluminum swing arm provide good handling. The front and rear brakes are single 260 mm and single 220 mm discs, respectively. The bike has a steering head angle of 63.5o, a wheelbase of 1475 mm, and a ground clearance of 380 mm with a seat height of 925 mm. The dry weight of the bike is 107 kg with an oil capacity of 1.1 L and a fuel capacity of 7.0 L. According to CycleTorque, the KTM 250 EXC Enduro is a good bike with impressive performance, making it suitable for off-road and enduro riding.


Technical specifications:

Make Model: KTM 250 EX/C Enduro

Year: 2007 – 08
Engine: Two stroke, single cylinder
Capacity: 249.5 cc / 15.2 cu in
Bore x Stroke: 72 x 66.4 mm
Compression System: 12.8:1
Cooling System: Liquid cooled
Lubrication: Pessure circulation lubrication with 2 rotor pumps
Engine Oil: Full synthetic oil (Motorex Power Synt 4T 10W/50)
Induction: Keihin MX FCR 39 carburetor
Spark Plug: NGK CR 9 EBK
Ignition: Contactless DC-CDI ignition with digital advanced system by KOKUSAN
Battery: 12V 4Ah, maintenance free
Starting: Kick and electric
Clutch: Wet, multiplate, hydraulically operated
Transmission: 6 Speed
Primary Drive Ratio: 22:68
Gear Ratios: 1 st 13:33 / 2nd 17:33 / 3rd 19:29 / 4th 23:28 / 5th 23:23 6th 26:22
Final Drive Ratio: 13:52
Final Drive: Chain, 5/8″ x 1/4″
Frame: Central chrome-moly-steel frame
Front Suspension: WP Suspension 4860 MXMA / MXMA + PA
Front Wheel Travel: 300 mm / 11.8 in
Rear Suspension: WP Suspension 5018 PDS MCC / DCC, aluminium swing arm
Rear Wheel Travel: 335 mm / 13.2 in
Front Brakes: Single 260 mm disc, floating caliper
Rear Brakes: Single 220 mm disc, floating caliper
Front Tyre: 90/90 – 21″
Rear Tyre: 120/90 – 18″
Steering Head Angle: 63.5o
Wheelbase: 1475 mm / 58.1 in
Ground Clearance: 380 mm / 15.1 in
Seat Height: 925 mm / 36.4 in
Dry Weight: 107 kg / 235 lbs
Oil Capacity: 1.1 L / 1.2 US qt / 1.0 Impqt
Fuel Capacity: 7.0 L / 1.8 US gal / 1.5 Imp gal
Review: CycleTorque

The post KTM 250 EXC Enduro (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
KTM 950 Supermoto R (2007-08) https://motorcyclespecifications.com/ktm-950-supermoto-r-2007-08-specs/ Tue, 04 Apr 2023 02:40:57 +0000 https://motorcyclespecifications.com/?p=43780 The KTM 950 Supermoto R is a four-stroke motorcycle with a 942cc engine that produces 98hp and 95 Nm of torque. It has a six-speed transmission and a chain final

The post KTM 950 Supermoto R (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The KTM 950 Supermoto R is a four-stroke motorcycle with a 942cc engine that produces 98hp and 95 Nm of torque. It has a six-speed transmission and a chain final drive. The frame is a tubular cromoly spaced frame, and the bike has front and rear suspension by WP, which is fully adjustable. The front brakes consist of two 305mm discs with four-piston calipers, and the rear brake is a single 240mm disc with a one-piston caliper. The bike has a 24.4-degree rake, a 109 mm trail, a 1505 mm wheelbase, and a 875 mm seat height. The fuel capacity is 15 litres, and the dry weight is 191 kg. The KTM 950 Supermoto R can reach a top speed of 137 mph and complete a standing quarter-mile in 11.4 seconds at 116.5 mph.


Technical specifications:

Make Model: KTM 950 Supermoto R

Year: 2007 – 08
Engine: Four stroke, 75 degreesV-twin cylinder, DOHC, 4 valves per cylinder
Capacity: 942 cc / 57.4 cu-in
Bore x Stroke: 100 x 60 mm
Cooling System: Liquid cooling
Compression Ratio: 11.5;1
Lubrication: Pressure lubrication with 2 Eaton pumps
Engine Oil: Synthetic, 15w-50
Induction: 2X 43mm Keihin constant pressure
Spark Plug: NGK, NGK CR 8 EK
Ignition: Denso battery ignition
Starting: Electric
Max Power: 98 hp / 72 kW @ 8500 rpm
Max Torque: 95 Nm / 70.1 lb-ft @ 6500 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Tubular cromoly spaced frame. powered coated
Front Suspension: 48mm WP Upside down adjustable
Front Wheel Travel: 200 mm / 7.8 in
Rear Suspension: WP shock, fully adjustable
Rear Wheel Travel: 210 mm / 8.2 in
Front Brakes: 2x 305mm discs 4 piston calipers
Rear Brakes: Single 240mm disc 1 piston caliper
Front Tyre: 120/70 -ZR17
Rear Tyre: 180/55 -ZR17
Rake: 24.4 degrees
Trail: 109 mm / 4.3 in
Wheelbase: 1505 mm / 59.3 in
Seat Height: 875 mm / 34.45 in
Ground Clearance: 195 mm / 7.7 in
Dry Weight: 191 kg / 421 lbs
Fuel Capacity: 15 Litres / 3.9 gal
Standing 1/4 Mile: 11.4 sec / 116.5 mph
Top Speed: 137 mph

The post KTM 950 Supermoto R (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Triumph Bonneville T100 (2007-08) https://motorcyclespecifications.com/triumph-bonneville-t100-2007-08-specs/ Tue, 04 Apr 2023 02:23:00 +0000 https://motorcyclespecifications.com/?p=43763 The Triumph Bonneville T100 was a motorcycle model produced in 2007-08. It had a four-stroke, parallel twin-cylinder engine with a capacity of 865 cc and a compression ratio of 9.2:1.

The post Triumph Bonneville T100 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Triumph Bonneville T100 was a motorcycle model produced in 2007-08. It had a four-stroke, parallel twin-cylinder engine with a capacity of 865 cc and a compression ratio of 9.2:1. It used twin carburetors with electric heating and had a digital ignition system with electric starting. The maximum power output was 50 kW (67 hp) at 7,500 rpm and it had a maximum torque of 69 Nm (51 ft-lb) at 5,800 rpm. The clutch was wet and multiplate, and the transmission was a five-speed. The final drive was through a chain with an X-ring. The Bonneville T100 had a tubular steel cradle frame with a twin-sided, tubular steel swingarm. The front suspension was 41 mm Kayaba telescopic forks with a Kayaba chrome spring twin shock rear suspension with adjustable preload. The front and rear brakes were both two-piston calipers with a single 310 mm disc at the front and a single 255 mm disc at the rear. The wheels were fitted with 36 spokes; 19 x 2.5 inches at the front and 17 x 3.5 inches at the rear with 100/90 19 front and 130/80 17 rear tires. Its dimensions were 2250 x 860 x 1105 mm (L x W x H), while the wheelbase was 1493 mm, and the seat height was 775 mm. The dry weight was 205 kg while the wet weight was 226 kg, and fuel capacity was 16.6 liters (4.4 US gal / 3.7 Imp gal).


Technical specifications:

Make Model: Triumph Bonneville T100

Year: 2007 – 08
Engine: Four stroke, parallel twin cylinder, DOHC, 4 valves per cylinder
Capacity: 865 cc / 52.8 cu in
Bore x Stroke: 90 x 68 mm
Cooling System: Air-cooled
Compression Ratio: 9.2:1
Lubrication: Wet sump
Engine Oil: Synthetic, 15W/50
Induction: Twin carburetors, electrically heated
Ignition: Digital
Starting: Electric
Max Power: 50 kW / 67 hp @ 7500 rpm
Max Torque: 69 Nm / 7.04 kgf-m / 51 ft-lb @ 5800 rpm
Clutch: Wet, multi plate
Transmission: 5 Speed
Final Drive: Chain, X-ring
Frame: Tubular steel cradle, swing arm: twin-sided, tubular steel
Front Suspension: 41mm Kayaba telescopic forks
Rear Suspension: Kayaba chrome spring twin shocks with adjustable preload
Front Brakes: Single 310 mm disc, 2 piston calipers
Rear Brakes: Single 255 mm disc, 2 piston calipers
Wheels Front: 36 Spokes, 19 x 2.5 in
Wheels Rear: 36 Spokes, 17 x 3.5 in
Front Tyre: 100/90 19
Rear Tyre: 130/80 17
Rake: 28 degrees
Trail: 110 mm / 4.3 in
Dimensions: Length 2250 mm / 88.6 in Width 860 mm / 33.8 in Height 1105 mm / 43.5 in
Wheelbase: 1493 mm / 58.8 in
Seat Height: 775 mm / 30.5 in
Dry Weight: 205 kg / 451 lbs
Wet Weight: 226 kg / 499 lbs
Fuel Capacity: 16.6 Litres / 4.4 US gal / 3.7 Imp gal

The post Triumph Bonneville T100 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
CCM CXR230 (2007-08) https://motorcyclespecifications.com/ccm-cxr230-2007-08-specs-2/ Tue, 04 Apr 2023 02:18:56 +0000 https://motorcyclespecifications.com/?p=43759 The CCM CXR230 motorcycle was a dirt bike produced in 2007-08. The bike had a 223cc single-cylinder four-stroke engine and a six-speed gearbox. The frame was made of aluminum, and

The post CCM CXR230 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The CCM CXR230 motorcycle was a dirt bike produced in 2007-08. The bike had a 223cc single-cylinder four-stroke engine and a six-speed gearbox. The frame was made of aluminum, and the bike had adjustable suspension and disc brakes. The CXR230 had a dry weight of 106kg and a seat height of 940mm. The bike was designed for off-road riding, with features such as knobby tires and a high ground clearance. Overall, the CXR230 received positive reviews for its performance and handling on rough terrain. However, some riders noted that the bike’s power output could be limiting for more experienced riders. The CXR230 was also reportedly prone to electrical issues, which could cause problems for some riders. Despite these drawbacks, the CCM CXR230 remains a dependable and capable choice for off-road enthusiasts.


Technical specifications:

Continue reading

The post CCM CXR230 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
BMW K1200S (2007-08) https://motorcyclespecifications.com/bmw-k1200s-2007-08-specs/ Mon, 03 Apr 2023 19:59:08 +0000 https://motorcyclespecifications.com/?p=43409 The BMW K1200S motorcycle was produced for the 2007-08 years. It features a four-stroke, transverse four-cylinder DOHC engine with a capacity of 1157 cc and a compression ratio of 13.0:1.

The post BMW K1200S (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The BMW K1200S motorcycle was produced for the 2007-08 years. It features a four-stroke, transverse four-cylinder DOHC engine with a capacity of 1157 cc and a compression ratio of 13.0:1. The bike is cooled by a liquid cooling system and has an electronic ignition system. The transmission is a six-speed and the final drive is via shaft. Its frame is a bridging frame made of die-cast aluminum that is load-bearing. The front wheel of the bike has BMW Motorrad Duolever suspension and the rear wheel has BMW Paralever suspension. The bike has two front brakes, two 320mm discs with four-piston calipers, and a single 265mm disc with two-piston caliper as the rear brake. The bike is equipped with a 120/70-17 front tire and a 190/50-17 rear tire. The dry weight of the bike is 248 kg and has a fuel capacity of 19 liters. The bike has an average consumption of 6.7L/100km with a standing 0-100 km/h time of 3.0 seconds. The top speed of the bike is 286 km/h. The BMW K1200S has good reviews from motorcycle experts and is considered a speedy race bike.


Technical specifications:

Make Model: BMW K 1200S

Year: 2007 – 08
Engine: Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder
Capacity: 1157 cc / 70.6 cu in
Bore x Stroke: 79 X 59 mm
Compression Ratio: 13.0:1
Cooling System: Liquid cooled
Induction: Injection
Ignition: Electronic
Starting: Electric
Max Power: 124.5 kW / 167 hp @ 10250 rpm
Max Torque: 129 Nm / 13.2 kgf-m / 95.4 lb-ft @ 8250 rpm
Transmission: 6 Speed
Final Drive: Shaft
Frame: Bridging frame, die-cast aluminium, load bearing engine
Front Suspension: BMW Motorrad Duolever; central spring strut
Front Wheel Travel: 115 mm / 4.5 in.
Rear Suspension: BMW Paralever with progressive damping single shock absorber, remotely adjustable for preload and rebound
Rear Wheel Travel: 135 mm / 5.3 in.
Front Brakes: 2 x 320mm discs, 4 piston calipers
Rear Brakes: Single 265mm disc, 2 piston caliper
Front Tyre: 120/70-17
Rear Tyre: 190/50-17
Seat Height: 820 mm / 32.3 in.
Dry Weight: 248 kg / 547 lbs
Fuel Capacity: 19 L / 5.0 US gal
Consumption Average: 6.7 L/100 km / 15 km/l / 35.3 US mpg
Standing 0 -100 km/h: 3.0 sec
Standing 0 -150 km/h: 5.1 sec
Standing 0 -200 km/h: 8.4 sec
Standing 1/4 Mile: 11.7 sec / 209 km/h / 130 mph
Top Speed: 286 km/h / 178 mph
Reviews: Motorcycle-USA / MCN.au / MCN part 1 – part 2 – part 3 / Motorcycle.com / Motorrad / K1200S

The post BMW K1200S (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Kawasaki Concours 14 (2007-08) https://motorcyclespecifications.com/kawasaki-concours-14-2007-08-specs/ Mon, 03 Apr 2023 15:34:04 +0000 https://motorcyclespecifications.com/?p=43162 The Kawasaki GTR 1400 Concours 14 motorcycle was produced from 2007 to 2008. It had a four-stroke, transverse four-cylinder engine with a capacity of 1352 cc and a bore/stroke ratio

The post Kawasaki Concours 14 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Kawasaki GTR 1400 Concours 14 motorcycle was produced from 2007 to 2008. It had a four-stroke, transverse four-cylinder engine with a capacity of 1352 cc and a bore/stroke ratio of 84 x 61 mm. The motorcycle was liquid-cooled and had a compression ratio of 10.7:1. Its fuel injection was equipped with four 40-mm cylinders, and it had a forced lubrication and a wet sump. The motorcycle had a maximum power output of 114 kW (155 hp) at 8800 rpm and a maximum torque of 136 Nm at 6200 rpm.

The bike was equipped with a six-speed manual transmission and a shaft final drive. The monocoque pressed aluminum frame, combined with a 43 mm inverted fork with adjustable rebound damping and spring preload, provided stability during rides. The front tyre was 120/70-ZR17, and the back tyre was 190/50-ZR17. The motorcycle had a seat height of 815 mm (32.1 in), ground clearance of 125 mm (4.9 in), and a wet weight of 300 kg (670.3 lbs)-ABS 304 kg (679.1 lbs). With a 22-liter (5.8 US gallon) fuel tank, it had an average consumption of 15.3 km/lit.

This bike can easily achieve high speeds, with a top speed of 253.6 km/h (157.5 mph) recorded. In the standing 1/4 Mile test, the bike clocked 11.2 seconds and reached a speed of 202.1 km/h (125.5 mph). It recorded a 20.8 second time and a speed of 238.1 km/h (148 mph) in the standing 1000m test.


Technical specifications:

Make Model: Kawasaki GTR 1400 Concours 14

Year: 2007 – 08
Engine: Four stroke, transverse four cylinders, DOHC, 4 valves per cylinder
Capacity: 1352 cc / 82.5 cu-in
Bore x Stroke: 84 x 61 mm
Cooling: Liquid cooled
Compression Ratio: 10.7;1
Induction: Fuel injection: ~A,40 mm x 4
Lubrication: Forced lubrication, wet sump
Ignition: Digital
Starting: Electric
Max Power: 114 kW / 155 hp @ 8800 rpm
Max Power Ram Air: 118.4 kW /161 hp @ 8800 rpm
Max Torque: 136Nm / 102.0 lb-ft / 13.9 [email protected] 6200 rpm
Clutch: Wet multi-disc manual
Transmission: 6 Speed
Final Drive: Shaft
Gear Ratio: 1st 3.333 (50/15) 2nd 2.415 (41/17) 3rd 1.900 (38/20) 4th 1.545 (34/22) 5th 1.292 (31/24) 6th 1.074 (29/27)
Frame: Monocoque pressed aluminum
Front Suspension: 43 mm inverted fork with adjustable rebound damping and spring preload
Front Wheel Travel: 113 mm / 4.4 in
Rear Suspension: Bottom link Unit-Trek with gas charged shock, Tetra lever rebound damping
Rear Wheel Travel: 136 mm / 5.4 in
Front Brakes: 2X 310mm discs 4 piston calipers
Rear Brakes: Single 270mm disc 2 piston caliper
Front Tyre: 120/70- ZR17
Rear Tyre: 190/50 -ZR17
Steering Angle, Left / Right: 31 degrees / 31 degrees
Rake: 26.1 degrees
Trail: 112 mm / 4.4 in
Dimensions: Length 2230 mm / 89.4 in. Width 790 mm / 31.4 in Height 1345 mm / 50.8 in. – 1465 mm / 31.4 in. (High position)
Wheelbase: 1520 mm / 59.8 in
Ground Clearance: 125 mm / 4.9 in
Seat Height: 815 mm / 32.1 in.
Wet Weight: 300 kg / 670.3 lbs – ABS 304 kg / 679.1 lbs
Fuel Capacity: 22 Litres / 5.8 US gal
Consumption Average: 15.3 km/lit
Standing 1/4 Mile: 11.2 sec / 202.1.km/h / 125.5 mph
Standing 1000m: 20.8 sec / 238.1 km/h / 148 mph
Top Speed: 253.6 km/h / 157.5 mph

The post Kawasaki Concours 14 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Harley Davidson FXDB Dyna Street Bob (2007-08) https://motorcyclespecifications.com/harley-davidson-fxdb-dyna-street-bob-2007-08-specs/ Mon, 03 Apr 2023 15:07:03 +0000 https://motorcyclespecifications.com/?p=43136 The Harley Davidson FXDB Dyna Street Bob motorcycle was produced from 2007 to 2008. It has a four-stroke, 45-degree V-twin engine with a capacity of 1584cc and a compression ratio

The post Harley Davidson FXDB Dyna Street Bob (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Harley Davidson FXDB Dyna Street Bob motorcycle was produced from 2007 to 2008. It has a four-stroke, 45-degree V-twin engine with a capacity of 1584cc and a compression ratio of 9.2:1. The engine is fitted with electronic sequential port fuel injection and a single-fire, non-wasted, map-controlled spark ignition. Max torque is 124.7 Nm at 3000 rpm, and the six-speed transmission is belt-driven. The bike has a mild steel, tubular frame with stamped, cast, and forged junctions, and the front suspension is a 49mm polished aluminum fork with dual-rate springs. The rear suspension has a coil-over shock. Braking is provided via a single 300mm disc with a four-piston caliper at the front and a single 292mm disc with a two-piston caliper at the rear, and the tyres are 100/90-19 at the front and 160/70-17 at the rear. The bike has a very low seat height, ranging from 648 mm laden to 678 mm unladen. The gross vehicle weight rating is 492.2kg, while dry weight is 288kg and wet weight is 302.6kg. The bike has a fuel capacity of 17.8 litres and an oil capacity of 2.8 litres. Overall, the Harley Davidson FXDB Dyna Street Bob is a stylish and powerful motorcycle with a unique character, thanks to its V-twin engine and distinctive design.


Technical specifications:

Make Model: Harley Davidson FXDB Dyna Street Bob

Year: 2007 – 08
Engine: Four stroke, 45 degrees V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder
Capacity: 1584 cc / 96 cu-in
Bore x Stroke: 95.3 x 111.1 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric
Max Torque: 124.7 Nm / 92 ft/ lbs. @ 3000 rpm
Transmission: 6 Speed
Final Drive: Belt
Primary Drive: Chain, 34/46 ratio
Gear Ratio: 1st 9.311 2nd 6.454 3rd 4.793 4th 3.882 5th 3.307 6th 2.79
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs,
Rear Suspension: Coil over shock ,
Front Brakes: Single 300mm disc 4 piston caliper
Rear Brakes: Single 292mm disc 2 piston caliper
Front Tyre: 100/90-19 57H
Rear Tyre: 160/70-17 73V
Rake: 29 degrees
Trail: 120 mm / 4.7 in
Dimensions: Length 2357 mm / 92.8 in Width 953 mm / 37.5 in. Height 1280 mm / 50.4 in
Wheelbase: 1630 mm / 64.2 in
Seat Height: Laden 648 mm / 25.5 in Unladen 678 mm / 26.7 in
Gross Vehicle Weight Rating: 492.2 kg / 1085 lbs
Dry Weight: 288 kg / 634 lbs.
Wet Weight: 302.6 kg / 667 lbs
Oil Capacity: 2.8 Litres / 3.0 qts
Fuel Capacity: 17.8 Litres / 4.7 US gal

The post Harley Davidson FXDB Dyna Street Bob (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Aprilia Mana 850 (2007-08) https://motorcyclespecifications.com/aprilia-mana-850-2007-08-specs/ Mon, 03 Apr 2023 12:55:05 +0000 https://motorcyclespecifications.com/?p=43011 The Aprilia Mana 850 is a motorcycle produced in 2007-08. It has a four-stroke, longitudinal 90 degrees V twin engine with a capacity of 839.3 cc/51.2 cu in. It has

The post Aprilia Mana 850 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Aprilia Mana 850 is a motorcycle produced in 2007-08. It has a four-stroke, longitudinal 90 degrees V twin engine with a capacity of 839.3 cc/51.2 cu in. It has a compression ratio of 11.0:1 and is liquid-cooled with a dry sump lubrication system. It meets Euro 3 emission standards and has Weber Marelli electronic fuel injection with one A38 mm throttle body for induction. The ignition is a digital electronic ignition with two spark plugs per cylinder integrated with the fuel injection system. It has an electric starting system and a two-in-one stainless steel exhaust system with a three-way catalytic converter and lambda probe. The maximum power of the motorcycle is 75 hp at 7250 rpm, and maximum torque is 76.5 Nm/7.79 kgf-m/56.4 lb-ft at 8000 rpm. The motorcycle’s transmission is sequential with a manual or automatic mode selectable by the user and has seven ratios in manual mode. It has a chain final drive and a high-strength steel trellis frame. The front suspension consists of a 43 mm upside-down fork with 120 mm/4.7 in of wheel travel, and the rear suspension is an aluminum alloy single-piece swingarm with a hydraulic shock absorber adjustable in spring preload/rebound damping and 125 mm/4.9 in of wheel travel. The front brakes consist of two 320 mm discs with four-piston calipers.


Technical specifications:

Make Model: Aprilia NA 850 Mana

Year: 2007-08
Engine: Four stroke, longitudinal 90 degreesV twin, DOHC, 4 valves per cylinder
Capacity: 839.3 cc / 51.2 cu in
Bore x Stroke: 88 x 69 mm
Compression Ratio: 11.0:1
Cooling System: Liquid cooled
Lubrication: Dry sump with separate oil reservoir integrated inside the engine
Emission Standard: Euro 3
Induction: Integrated engine management system. Weber Marelli electronic fuel injection with one ~A38 mm throttle body
Ignition: Digital electronic ignition, with two spark plugs per cylinder, integrated with fuel injection system
Starting: Electric
Exhaust: Two-in-one system in 100% stainless steel with three-way catalytic converter and Lambda probe
Max Power: 55.1 kW / 75 hp @ 7250 rpm
Max Torque: 76.5 Nm / 7.79 kgf-m / 56.4 lb-ft @ 8000 rpm
Transmission: Sequential with manual or automatic mode selectable by the user. 7 ratios in manual mode
Final Drive: Chain
Frame: High strength steel trellis
Front Suspension: ~A43 mm Upside-down fork
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Aluminium alloy single-piece swingarm. Hydraulic shock absorber adjustable in spring preload and rebound damping.
Rear Wheel Travel: 125 mm / 4.9 in
Front Brakes: 2 x ~A320 mm discs, 4 piston caliper

The post Aprilia Mana 850 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Suzuki DL 650 V-Strom (2007-08) https://motorcyclespecifications.com/suzuki-dl-650-v-strom-2007-08-specs/ Mon, 03 Apr 2023 01:55:59 +0000 https://motorcyclespecifications.com/?p=42408 The Suzuki DL 650 V-Strom X is a motorcycle that was produced from 2007-08. It has a four-stroke, 645cc engine that is liquid-cooled and uses fuel injection. The V-twin engine

The post Suzuki DL 650 V-Strom (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Suzuki DL 650 V-Strom X is a motorcycle that was produced from 2007-08. It has a four-stroke, 645cc engine that is liquid-cooled and uses fuel injection. The V-twin engine produces a maximum power of 49 kW and maximum torque of 63.1 Nm. The transmission is six-speed and the final drive is through a chain. The frame is made of aluminum with twin spars. The front suspension is telescopic with coil springs and oil damping, while the rear suspension is link type with oil damping and coil springs. Both front and rear brakes have ABS and the front brakes use two 310mm discs with two-piston calipers. The bike is 2290mm long, 840mm wide, and 1390mm high, with a wheelbase of 1555mm and a seat height of 820mm. It has a fuel capacity of 22 litres and weighs 220kg when wet. The standing quarter-mile time is 13.2 seconds and the top speed is 180 km/h.


Technical specifications:

Make Model: Suzuki DL 650 V-Strom X

Year: 2007 – 08
Engine: Four stroke, 90 degrees-V-twin, DOHC, 4 valves per cylinder.
Capacity: 645 cc / 39.4 cu-in
Bore x Stroke: 81 x 62.6 mm
Cooling System: Liquid cooled
Compression Ratio: 11.5:1
Lubrication: Wet sump
Induction: Fuel Injection 39 mm
Ignition: Electronic Ignition
Spark Plug: NGK, CR8E
Starting: Electric
Max Power: 49 kW / 66.6 hp @ 8800 rpm
Max Torque: 63.1 Nm / 6.4 kgf-m / 45.5 lb-ft @ 7600 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Frame: Aluminium, twin spar
Front Suspension: Telescopic, coil spring, oil damped, spring preload adjustable
Front Wheel Travel: 160 mm / 6.2 in
Rear Suspension: Link type, oil damped, coil spring, spring preload fully adjustable, rebound damping force fully adjustable
Rear Wheel Travel: 163 mm / 6.4 in
Front Brakes: 2 x 310 mm disc, 2 piston calipers, ABS
Rear Brakes: Single 260 mm disc, 1 piston caliper, ABS
Front Tyre: 110/80R19
Rear Tyre: 150/70R17
Dimensions: Length 2290 mm / 90.1 in Width 840 mm / 33.0 in Height 1390 mm / 54.7 in
Wheelbase: 1555 mm / 61.2 in
Seat Height: 820 mm / 32.3 in
Ground Clearance: 165 mm / 6.4 in
Dry Weight: 194 kg / 427.6 lbs
Wet Weight: 220 kg / 485 lbs
Fuel Capacity: 22 Litres / 5.8 US gal / 4.8 Imp gal
Standing 1/4 Mile: 13.2 sec
Top Speed: 180 km/h / 112 mph

The post Suzuki DL 650 V-Strom (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Aprilia RS 125 R (2007-08) https://motorcyclespecifications.com/aprilia-rs-125-r-2007-08-specs/ Sun, 02 Apr 2023 23:46:55 +0000 https://motorcyclespecifications.com/?p=42296 The Aprilia RS 125 R motorcycle was produced from 2007 to 2008. It features a single cylinder, two stroke engine with a capacity of 124.8cc and reed valve induction. The

The post Aprilia RS 125 R (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Aprilia RS 125 R motorcycle was produced from 2007 to 2008. It features a single cylinder, two stroke engine with a capacity of 124.8cc and reed valve induction. The engine has a compression ratio of 12.5:1 and is liquid cooled with separate mixing and a volumetric pump. The bike uses a Dell’Orto PHBH 28 carburetor and has CDI electronic ignition. The bike has a maximum power of 21 kW or 28 hp at 10,500 rpm, and maximum torque of 19 Nm or 14.1 lb-ft at 9,000 rpm. It has a six-speed transmission with a wet mult-disc clutch and chain final drive. The frame is made of cast aluminium and has a reinforced box section with a sloping twin-spar frame. The front suspension features upside-down forks with 40mm of travel, and the front wheel has 120mm of travel.


Technical specifications:

Make Model: Aprilia RS 125 R

Year: 2007 – 08
Engine: Single cylinder, two stroke, reed valves induction
Capacity: 124.8 cc / 7.5 cu in
Bore x Stroke: 54 x 54.5mm
Compression Ratio: 12.5:1
Cooling System: Liquid cooled
Lubrication: Separate mixing, volumetric pump
Induction: Dell’Orto PHBH 28 carburetor
Ignition: CDI electronic ignition
Starting: Electric
Alternator: 12V, 180W
Max Power: 21 kW / 28 hp @ 10500 rpm
Max Torque: 19 Nm / 1.9 kgf-m / 14.1 lb-ft @ 9000 rpm
Clutch: Wet, multi-disc
Transmission: 6 Speed
Final Drive: Chain
Gear Ratios: 1st 10:30 / 2nd 14:29 / 3rd 17:27 / 4th 19:25 / 5th 21:24 / 6th 22:23
Primary Drive: 63:19
Final Drive: 17:40
Frame: Cast aluminium, reinforced box section, sloping twin-spar frame
Front Suspension: Upside-down forks, 40mm
Front Wheel Travel: 120 mm / 4.7 in

The post Aprilia RS 125 R (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
Beta Alp4 (2007-08) https://motorcyclespecifications.com/beta-alp4-2007-08-specs/ Sun, 02 Apr 2023 23:31:04 +0000 https://motorcyclespecifications.com/?p=42281 The Beta Alp 4.0 is a motorcycle that was manufactured between the years 2007 and 2008. It has a four-stroke, single-cylinder, SOHC, 4-valve engine, with a capacity of 349cc. The

The post Beta Alp4 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>
The Beta Alp 4.0 is a motorcycle that was manufactured between the years 2007 and 2008. It has a four-stroke, single-cylinder, SOHC, 4-valve engine, with a capacity of 349cc. The bore and stroke of the engine are 79 x 71.2mm, respectively, and the compression ratio is 9.5:1. The cooling system is air-cooled, and induction is through a Mikuni BST 33 carburetor. The ignition is electronic, and starting is electric. The motorcycle has a maximum power of 20 kW / 27 hp and a maximum torque of 28 Nm / 2.9 kgf-m. The clutch is wet, multi-disc, and the transmission is six-speed. The final drive is through a chain. The frame is a tubular steel, double closed cradle, and the front suspension is a hydraulic fork with 48mm tubes. The rear suspension is a single shock adjustable for spring preload. The front and rear brakes are single discs, and the wheels are alloy with laced spokes. The front tyre is 90/90 -21, and the rear tyre is 140/80 -18. The dimensions of the motorcycle are length: 2185 mm, width: 860 mm, and height: 1230 mm, with a wheelbase of 1410 mm, ground clearance of 300 mm, and seat height of 865 mm. The dry weight of the motorcycle is 133 kg, with a fuel capacity of 10.5 litres and a fuel reserve of 3.5 litres. The fuel consumption is 5.6 L/100 km, and the standing 1/4 mile is 16.1 sec. The top speed of the Beta Alp 4.0 is 131.1 km/h or 81.5 mph.


Technical specifications:

Make Model: Beta Alp 4.0

Year: 2007 – 08
Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 349 cc / 21.3 cu in
Bore x Stroke: 79 x 71.2 mm
Compression Ratio: 9.5:1
Cooling System: Air cooled
Induction: Mikuni BST 33
Ignition: Electronic
Starting: Electric
Max Power: 20 kW / 27 hp
Max Torque: 28 Nm / 2.9 kgf-m 21 lb-ft
Clutch: Wet, multi disc
Transmission: 6 Speed
Final Drive: Chain
Frame: Tubular steel, double closed cradle
Front Suspension: Hydraulic fork, 48mm
Front Wheel Travel: 200 mm / 7.9 in
Rear Suspension: Single shock adjustable spring preload
Rear Wheel Travel: 220 mm / 8.7 in
Front Brakes: Single 260 mm disc, 2-piston caliper
Rear Brakes: Single 220 mm disc, 2-piston caliper
Wheels: Alloy, laced spokes
Front Tyre: 90/90 -21
Rear Tyre: 140/80 -18
Dimensions: Length: 2185 mm / 86.0 in Width: 860 mm / 33.9 in Height: 1230 mm / 48.4 in
Wheelbase: 1410 mm / 55.5 in
Ground Clearance: 300 mm / 1.8 in
Seat Height: 865 mm / 34 in
Dry Weight: 133 kg / 293 lbs
Fuel Capacity: 10.5 Litres / 2.8 US gal
Fuel Reserve: 3.5 Litres / 0.9 US gal
Fuel Consumption: 5.6 L/100 km / 17.7 km/l / 41.6 US mpg
Standing 1/4 Mile: 16.1 sec
Top Speed: 131.1 km/h / 81.5 mph

The post Beta Alp4 (2007-08) appeared first on MotorcycleSpecifications.com.

]]>