The Suzuki A95 motorcycle was produced from 1969 to 1973 and featured a two stroke, single cylinder engine with a capacity of 69 cc and compression ratio of 7:1. The bike was air cooled and used a Posi-Force lubrication system with a separate oil tank. It used an Amal VM15CC carburetor for induction and had a kick start. The maximum power output was 5.6 kW at 7500 rpm and maximum torque was 7.8 Nm at 6000 rpm. The transmission was a 4-speed constant mesh with toe and heel shift, and it had a chain final drive. The frame was made of pressed steel and the front suspension was telescopic fork with oil damping, while the rear suspension was swingarm with oil damping. The tires were 2.25-17 4PR in the front and 2.50-17 4PR in the rear. The bike had a length of 1855 mm, width of 760 mm, and height of 1040 mm. The wheelbase was 1185 mm, ground clearance was 140 mm, and seat height was 780 mm. It weighed 70 kg and had a fuel capacity of 5 L with a top speed of 95 km/h.
Technical specifications:
Make Model: Suzuki A95
| Year | 1969 – 73 |
|---|---|
| Engine | Two stroke, single cylinder |
| Capacity | 69 cc / 4.2 cu in |
| Compression Ratio | 7:1 |
| Cooling System | Air cooled |
| Bore x Stroke | 46 x 42 mm |
| Lubrication System | Posi-Force with separate oil tank |
| Induction | Amal VM15CC carburetor |
| Starting | Kick |
| Max Power | 5.6 kW / 75 hp @7500 rpm |
| Max Torque | 7.8 Nm / 0.8 kgf-m / 5.75 ft-lb @ 6000 rpm |
| Transmission | 4-Speed, constant mesh, toe and heel shift |
| Final Drive | Chain |
| Frame | Pressed steel |
| Front Suspension | Telescopic fork, oil damped |
| Rear Suspension | Swingarm, oil damped |
| Front Tyre | 2.25-17 4PR |
| Rear Tyre | 2.50-17 4PR |
| Dimensions | Length: 1855 mm / 73.0″ Width: 760 mm / 29.9″ Height: 1040 mm / 47.2″ |
| Wheelbase | 1185 mm / 46.7″ |
| Ground Clearance | 140 mm / 5.5″ |
| Seat Height | 780 mm / 30.7″ |
| Dry Weight | 70 kg / 154 lbs |
| Fuel Capacity | 5 L / 1.6 US gal |
| Top Speed | 95 km/h / 59 mph |
