Rickman Predator 1000CR (1982)

The Rickman Predator 1000CR is a motorcycle produced in 1982 with a four-stroke, transverse four-cylinder, DOHC engine that has 2 valves per cylinder and a capacity of 987. It has a compression ratio of 9.2:1, and induction system consisting of four 28mm Mikuni VM 28 SS carbs. The ignition system is electronic, and it starts using electricity. The maximum power output of the Rickman Predator 1000CR is 90 horsepower at 8200 rpm, with a maximum torque of 8.5 kgf-m at 6500 rpm. The transmission has 5 speeds, and the final drive is a chain. The hand-made frame is built using Reynolds 531 nickel-plated material, with Ceriani forks for front suspension and Koni tri-rate rear shocks. The front brakes feature two discs, while the rear brake has one disc. The bike weighs a dry weight and has an unknown fuel capacity.

Technical specifications:

Make Model: Rickman Predator 1000CR

Year: 1982
Engine: Four stroke, transverse four cylinder, DOHC, 2 valves per cylinder.
Capacity: 987
Bore x Stroke: 70 x 64.8 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: 4x 28mm Mikuni VM 28 SS carbs.
Ignition: Electronic
Starting: Elctric
Max Power: 90 hp 65.7 @ 8200 rpm
Max Torque: 8.5 kgf-m @ 6500 rpm
Transmission: 5 Speed
Final Drive: Chain
Frame: Reynolds 531 nickel plated hand made frame
Front Suspension: Ceriani forks
Rear Suspension: Koni tri-rate rear shocks
Front Brakes: 2x discs
Rear Brakes: Single disc
Front Tyre:
Rear Tyre:
Dry Weight:
Fuel Capacity: