The MV Agusta 125S SE motorcycle was produced from 1974 to 1977 with a total production of 2493 units. It had a four-stroke, single-cylinder, pushrod, 2 valve engine with a capacity of 123.5 cc, and a compression ratio of 9.5:1. The bike had a wet sump lubrication system, carburettor induction, and electronic ignition, with a kick start to initiate the engine. The maximum power of the motorcycle was 10.2 kW, 14 hp delivered at 8500 rpm. It had a wet multiple plate clutch and a five-speed transmission system with a chain final drive. The motorcycle had a frame comprised of open double cradle tubular and pressed steel, with hydraulic telescopic forks for the front suspension and dual shocks for the rear. The front brake disk was single and measures 260mm while the rear brake drum had a diameter of 160mm. The motorcycle had a width of 640mm and length of 1940mm, while the wheelbase measured 1300mm. It had a dry weight of 103kg and a fuel capacity of 19 litres or 5.0 US gallons.
Make Model: MV Agusta 125S SE
Year: 1974 – 77
Produced: 2493 Units
Engine: Four stroke, single cylinder, pushrod, 2 valve
Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…
Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…
The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…
The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…
The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…
The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…