MV Agusta 125 (1954)

The MV Agusta 125 (1954) motorcycle had a four-stroke, single-cylinder, SOHC, two-valve engine with a capacity of 172 cc / 10.6 cu-in. The engine featured a Dellorto MA18 carburetor, had a compression ratio of 6.5:1, and produced a maximum power output of 5.4 kW / 7.5 hp at 5400 rpm. The motorcycle had a four-speed transmission and a chain final drive. It had a double-cradle tubular and pressed steel frame and was equipped with hydraulic telescopic forks in the front and a swingarm with hydraulic shocks in the rear. The front brakes were 180mm drum brakes while the rear brakes were 150mm drum brakes. The front and rear tires were both 2.75- 19. The motorcycle had a length of 1895mm, a width of 620mm, and a wheelbase of 1280mm. It weighed 105kg and had a fuel capacity of 16 liters.

Technical specifications:

Make Model: MV Agusta 175 Monoalbero

Year: 1954
Engine: Four stroke, single cylinder, SOHC, 2 valve
Capacity: 172 c / 10.6 cu-in
Bore x Stroke: 59.5 x 62 mm
Cooling System: Air cooled
Compression Ratio: 6.5:1
Induction: Dellorto MA18 carburetor
Lubrication: Wet sump
Ignition: Flywheel-magneto
Starting: Kick
Max Power: 5.4 kW / 7.5 hp @ 5400 rpm
Transmission: 4 Speed
Final Drive: Chain
Frame: Double cradle tubular and pressed steel
Front Suspension: Hydraulic telescopic forks
Rear Suspension: swingarm with hydraulic shocks
Front Brakes: 180mm Drum
Rear Brakes: 150mm Drum
Front Tyre: 2.75- 19
Rear Tyre: 2.75- 19
Dimensions: Length: 1895 mm Width: 620 mm
Wheelbase: 1280 mm /
Dry Weight: 105 kg
Fuel Capacity: 16 Litres