MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Laverda  Specifications

Laverda SFC 750 (1975-76)

Entry updated

At a glance

Capacity
744 cc / 45.4 cu-in
Power
75 hp / 56 kW @ 7400 rpm

The full picture.

The Laverda 750SFC was a motorcycle model produced between 1975-76 with a four stroke, parallel twin-cylinder engine and a capacity of 744cc. It featured 2 valve per cylinder, 10.5:1 compression ratio, and an air-cooled cooling system. The bike came with 2x 36mm PHB Dell’Orto carburetors and a Bosch electronic ignition. It had a maximum power of 75hp / 56kW at 7400 rpm and a 5-speed transmission with a chain final drive. It was equipped with telescopic forks on the front and dual Koni shocks preload shocks on the rear. The bike had 2x 280mm discs and 2 piston calipers on the front brakes, and a single 280mm disc and 2 piston caliper on the rear. The Laverda 750SFC had a front tire of 110/90-18 and a rear tire of 120/90-18. The bike weighed 231 kg/509.3lbs and had a fuel capacity of 25 liters.


Technical specifications:

Make Model: Laverda 750SFC

Motorcycle technical specifications
Year1975 – 76
EngineFour stroke, parallel twin cylinders, SOHC, 2 valve per cylinder
Capacity744 cc / 45.4 cu-in
Bore x Stroke80 x 74 mm
Cooling SystemAir cooled
Compression Ratio10.5:1
Induction2x 36mm PHB Dell’Orto carburetors
IgnitionBosch electronic
StartingElectric
Max Power75 hp / 56 kW @ 7400 rpm
Transmission5 Speed
Final DriveChain
Front Suspension38mm Telescopic forks
Rear SuspensionDual Koni shocks preload shocks
Front Brakes2x 280mm discs 2 piston calipers
Rear BrakesSingle 280mm discs 2 piston caliper
Front Tyre110/90-18
Rear Tyre120/90-18
Wet Weight231 kg / 509.3 lbs
Fuel Capacity25 Litres