The Laverda 125CR was a two-stroke, single cylinder motorcycle released in 1976. It had a capacity of 124cc and a compression ratio of 13.5:1. The bike featured a Dell’Orto premix carburetor and electronic ignition, and produced a maximum power of 23 hp at 9200 rpm. The transmission was a 6-speed with final drive via chain. It had a front suspension consisting of Marzocchi forks and swinging fork with gas shocks at the rear. The front and rear brakes were both drums. The bike had a dry weight of 81.5 kg and fuel capacity of 6.8 liters. Overall, the Laverda 125CR was a lightweight and powerful motorcycle with a sleek design.
Make Model: Laverda 125CR
Year: 1976
Engine: Two stroke, single cylinder
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 55 x 52 mm
Cooling System: Air cooled
Compression Ratio: 13.5:1
Induction: Dell’Orto premix carburetor
Ignition: Electronic
Starting: Kick
Max Power: 23 hp / 16.8 kW @ 9200 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Marzocchi forks
Rear Suspension: Swinging fork with gas shocks
Front Brakes: Drum
Rear Brakes: Drum
Front Tyre: 3.00-21
Rear Tyre: 4.00-18
Dry Weight: 81.5 kg / 179.6 lbs
Fuel Capacity: 6.8 Litres / 1.8 US gal
The 2024 Suzuki V-Strom 800 is the road-focused member of the 776 cc V-Strom family.…
The Suzuki GSX-8R is a fully faired middleweight introduced for the 2024 model year. Its…
The 2024 BMW R 1300 GS introduces a redesigned 1300 cc boxer engine and a…
The Yamaha YZF-R9 joins the supersport range for 2025 with an 890 cc three-cylinder engine.…
The Honda XL750 Transalp combines a 755 cc parallel-twin engine with a 21-inch front wheel…
The 2025 Honda CB750 Hornet is a middleweight roadster powered by a 755 cc parallel…