The Kawasaki Ninja 250SE is a motorcycle manufactured in 2018. It runs on a four-stroke, parallel twin engine with a capacity of 249 cc, cooled by liquid and lubricated by a wet sump. The bike uses fuel injection with 2x 32 mm throttle bodies and has a maximum power of 39 hp at 12500 rpm, with a maximum torque of 23.5 Nm at 10000 rpm. The clutch is wet, multi-disc, manual, with a six-speed transmission and final drive using an o-ring chain. The frame is made of high-tensile steel in a trellis design, and the front suspension is a 41mm telescopic fork, while the rear suspension uses a gas-charged shock with adjustable preload in a bottom-link Uni-Trak configuration. The brakes consist of a single semi-floating 310 mm petal disc in the front and a single 220 mm petal disc in the rear, and the tires are 110/70-17 M/C 54H in the front and 140/70-17 M/C 66H in the rear. The motorcycle is 1990 mm (length) x 710 mm (width) x 1125 mm (height) and has a wheelbase of 1370 mm, with a seat height of 785 mm and ground clearance of 145 mm. It weighs 167 kg (wet) and has a fuel capacity of 14 liters (3.7 US gallons).
Make Model: Kawasaki Ninja 250SE
Year: 2018
Engine: Four stroke . parallel twin, DOHC, 4 valve per cylinder
Capacity: 249 cc / 15.1 cu-in
Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…
Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…
The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…
The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…
The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…
The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…