The Husqvarna FE 450 motorcycle was produced between 2016 and 2017, with a four-stroke, single-cylinder engine featuring SOHC and 4 valves per cylinder. The bike has a capacity of 449 cc and a compression ratio of 11.8:1. It utilizes a liquid cooling system with constant circulation of cooling liquid using a water pump, and has forced oil lubrication with two Eaton pumps. The Keihin EMS provides induction, and the contactless, controlled, fully electronic ignition system features digital ignition timing adjustment, with an electric start.
There is no maximum power or torque data available for this bike. The clutch is a wet, DDS multi-disc clutch with Magura hydraulics, and the transmission is a 6-speed, claw shifted. The final drive is a chain X-ring 5/8 x 1/4″. The bike frame is made of 25CrMo4 steel, and it has WP Suspension Upside Down 4CS forks on the front and a WP Monoshock with linkage on the rear, with respective wheel travels of 300 mm and 330 mm.
The front and rear brakes are single-sided, with specifications of a 260 mm, 4-pot brake caliper for the front, and a 220 mm, 1-pot brake caliper for the rear. The front tire measures 90/90-21 and the rear tire is 140/90-18. The steering head angle is 63.5 degrees, and the trail is 107 mm. This motorcycle has a length of 2260 mm, a wheelbase of 1482 +/-10 mm, a seat height of 970 mm, a ground clearance of 345 mm, and a dry weight of 113.5 kg. With a fuel capacity of 8.5 litres or 2.3 US gallons, the bike is capable of going on long rides.
Make Model: Husqvarna FE 450
Year: 2016 – 17
Engine: Four stroke. single cylinder. SOHC. 4 valve per cylinder
Capacity: 449 cc / 27.4 cu-in
Bore x Stroke: 95 x 63.4 mm
Compression Ratio: 11.8;1
Cooling System: Liquid cooling system, continuous circulation of cooling liquid with water pump
Lubrication: Forced oil lubrication with 2 Eaton pumps
Induction: Keihin EMS
Ignition: Contactless, controlled, fully electronic ignition system with digital ignition timing adjustment
Starting: Electric
Max Power: NA
Max Torque: NA
Clutch: Wet, DDS multi-disc clutch, Magura hydraulics
Transmission: 6 speed, claw shifted
Final Drive: CChain X-Ring 5/8 x 1/4″
Primary Ratio: 24:73
Secondary Ratio: 14:52 (13:52)
Frame: 25CrMo4 steel central-tube frame
Front Suspension: WP Suspension Up Side Down 4CS forks.
Front Wheel Travel: 300 mm /11.8 in
Rear Suspension: WP Monoshock with linkage
Rear Wheel Travel: 330 mm / 13.0 in
Front Brakes: Single 260 mm with 4 pot brake caliper
Rear Brakes: Single 220 mm with 1 pot brake caliper
Front Tyre: 90/90-21
Rear Tyre: 140/90-18
Steering Head Angle: 63.5 degrees
Trail: 107 mm / 4.2 in
Dimensions: Length 2260 mm / 89.0 in
Wheelbase: 1482 +/-10 mm / 58.3 in
Seat Height: 970 mm / 38.2 in
Ground Clearance: 345 mm / 13.6 in
Dry Weight: 113.5 kg / 250.2 lbs
Fuel Capacity: 8.5 Litres / 2.3 US gal
Husqvarna's 2027 FC 250 uses a 249.9 cc engine. The published engine layout is 1-cylinder,…
For the 2027 KTM 125 XC-W, the manufacturer's technical sheet lists a 124.8 cc engine.…
The 2026 Triumph Speed Twin 1200 Cafe Racer Edition has a manufacturer-listed displacement of 1200…
Kawasaki's 2027 KLX140R uses a 144 cc engine. The published engine layout is air-cooled, 4-stroke,…
For the 2027 Suzuki DR-Z4SM, the manufacturer's technical sheet lists a 398 cc engine. The…
The 2027 Yamaha TT-R110E has a manufacturer-listed displacement of 110 cc. Its engine specification is…