Husqvarna FE350 (2016-17)

The Husqvarna FE 350 is a motorcycle with a four-stroke, single-cylinder engine with a capacity of 349.7 cc. It has a compression ratio of 12.8:1 and a cooling system that uses liquid that is continuously circulated by a water pump. The bike has a six-speed transmission and a chain final drive. Its frame is made of chrome molybdenum steel tubing and has WP Suspension Up Side Down 4CS forks for the front suspension and a WP Monoshock with linkage for the rear suspension. The front brake is a single 260 mm with a 4-pot brake caliper, while the rear brake is a single 220 mm with a 1-pot brake caliper. The bike has a steering head angle of 63.5 degrees and a trail of 107 mm. Its dimensions are 2260 mm in length, with a wheelbase of 1482+/-10 mm, a seat height of 970 mm, and a ground clearance of 345 mm. The dry weight of the bike is 109.2 kg, and it has a fuel capacity of 9.5 litres. Overall, the Husqvarna FE 350 is designed for off-road trails with its powerful engine and suspension system.

---

Technical specifications:

Make Model: Husqvarna FE 350

Year: 2016 – 17

Engine: Four stroke. single cylinder. DOHC. 4 valve per cylinder

Capacity: 349.7 cc / 21.3 cu in

Bore x Stroke: 88 x 57.5 mm

Compression Ratio: 12.8:1

Cooling System: Liquid cooling system, continuous circulation of cooling liquid with water pump

Lubrication: Forced oil lubrication with 2 Eaton pumps

Induction: Keihin electronic fuel injection and 42mm throttle body

Ignition: Contactless, controlled, fully electronic ignition system with digital ignition timing adjustment

Starting: Electric

Max Power: 45 hp / 32.8 kW

Max Torque: Nm / ft-lb @ rpm

Clutch: Wet multi-disc clutch DDS / Brembo hydraulics

Transmission: 6-speed, claw shifted

Final Drive: Chain 520 X-Ring

Primary Ratio: 24:73

Secondary Ratio: 14:52 (13:52)

Frame: Central tube frame made of chrome molybdenum steel tubing

Front Suspension: WP Suspension Up Side Down 4CS forks.

Front Wheel Travel: 300 mm /11.8 in

Rear Suspension: WP Monoshock with linkage

Rear Wheel Travel: 330 mm / 13.0 in

Front Brakes: Single 260 mm with 4 pot brake caliper

Rear Brakes: Single 220 mm with 1 pot brake caliper

Front Tyre: 90/90-21

Rear Tyre: 140/90-18

Steering Head Angle: 63.5 degrees

Trail: 107 mm / 4.2 in

Dimensions: Length 2260 mm / 89.0 in

Wheelbase: 1482 +/-10 mm / 58.3 in

Seat Height: 970 mm / 38.2 in

Ground Clearance: 345 mm / 13.6 in

Dry Weight: 109.2 kb / 240.7 lbs

Fuel Capacity: 9.5 Litres / 2.8 US gal