Husqvarna FE 250 (2014-15)

The Husqvarna FE 250 motorcycle was produced between 2014-15 and features a four-stroke, single-cylinder, DOHC engine with a capacity of 249.9cc. The bike has a liquid cooling system, continuous circulation of cooling liquid with a water pump and runs on forced oil lubrication with two Eaton pumps. The induction is Keihin electronic fuel injection and a 42mm throttle body. The bike has an electric starter and a wet multi-disc clutch DDS/Brembo hydraulics. It also has a six-speed, claw shifted transmission and a primary ratio of 24:73. The Husqvarna has a central tube frame made of chrome molybdenum steel tubing, WP Suspension Up Side Down 4CS forks, and a WP Monoshock with linkage. The bike weighs 107.5 kg / 237 lbs dry and has a fuel capacity of 9.5 Litres / 2.8 US gal. Further, the bike is fitted with single 260 mm with 4 pot brake caliper in front & single 220 mm with 1 pot brake caliper at the rear end, with 90/90-21 tyre in front and 140/90-18 tyre in the rear end. The bike also features a steering head angle of 63.5 degrees and a trail of 107 mm/4.2 in. The seat height is 970 mm/38.2 in, the ground clearance is 345 mm/13.6 in, and the wheelbase measures 1482 +/-10 mm/58.3 in.

Technical specifications:

Make Model: Husqvarna FE 250

Year: 2014 – 15
Engine: Four stroke. single cylinder. DOHC. 4 valve per cylinder
Capacity: 249.9 cc / 15.2 cu in
Bore x Stroke: 78 x 52.30 mm
Compression Ratio: 12.8:1.
Cooling System: Liquid cooling system, continuous circulation of cooling liquid with water pump
Lubrication: Forced oil lubrication with 2 Eaton pumps
Induction: Keihin electronic fuel injection and 42mm throttle body
Ignition: Contactless, controlled, fully electronic ignition system with digital ignition timing adjustment
Starting: Electric
Max Power: kW / hp @ rpm
Max Torque: Nm / ft-lb @ rpm
Clutch: Wet multi-disc clutch DDS / Brembo hydraulics
Transmission: 6-speed, claw shifted
Final Drive: Chain 520 X-Ring
Primary Ratio: 24:73
Secondary Ratio: 14:52 (13:52)
Frame: Central tube frame made of chrome molybdenum steel tubing
Front Suspension: WP Suspension Up Side Down 4CS forks.
Front Wheel Travel: 300 mm /11.8 in
Rear Suspension: WP Monoshock with linkage
Rear Wheel Travel: 330 mm / 13.0 in
Front Brakes: Single 260 mm with 4 pot brake caliper
Rear Brakes: Single 220 mm with 1 pot brake caliper
Front Tyre: 90/90-21
Rear Tyre: 140/90-18
Steering Head Angle: 63.5 degrees
Trail: 107 mm / 4.2 in
Dimensions: Length 2260 mm / 89.0 in
Wheelbase: 1482 +/-10 mm / 58.3 in
Seat Height: 970 mm / 38.2 in
Ground Clearance: 345 mm / 13.6 in
Dry Weight: 107.5 kb / 237 lbs
Fuel Capacity: 9.5 Litres / 2.8 US gal