MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Honda Specifications

Honda VF500C Magna V30 (1983)

Entry updated

Honda VF500C Magna V30 (1983)

At a glance

Capacity
498 cc / 30.3 cu-in
Power
68 hp @ 11500 rpm
Torque
31.7 lb-ft @ 10500 rpm

The full picture.

The Honda VF500C Magna V30 was a motorcycle produced in 1983. It was powered by a liquid-cooled, four-stroke 498cc V-four cylinder engine with 4 valves per cylinder and a compression ratio of 11.0:1, producing max power of 68hp at 11500rpm and max torque of 31.7 lb-ft at 10500rpm. The bike featured 4x 34mm Keihin carbs or 4x 32mm CV induction, as well as a transistorized ignition system. The clutch was a multiple plate coil spring and the transmission had 6 speeds with a final drive chain. The front suspension was telescopic air assisted with 140mm of wheel travel, while the rear suspension was a single shock swing arm with 115mm of wheel travel. The front brakes were 2x 255mm discs and the rear brakes were a drum. The bike had a weight of 271kg and a fuel capacity of 14 litres, with a top speed of 196.4km/h and a standing 1/4 mile time of 12.6 sec/164.5 km/h. The front and rear tyres were 100/90-16 and 130/90-18 respectively.


Technical specifications:

Make Model: Honda VF 500C Magna V30

Motorcycle technical specifications
Year1983
EngineFour stroke, 90 degreesV-four cylinder, DOHC, 4 valve per cylinder
Capacity498 cc / 30.3 cu-in
Bore x Stroke60.4 x 44 mm
Compression Ratio11.0:1
Cooling SystemLiquid cooled
Induction4x 34mm Keihin carbs
Induction4x 32mm CV
IgnitionTransistorized
Max Power68 hp @ 11500 rpm
Max Torque31.7 lb-ft @ 10500 rpm
ClutchMultiple plate coil springs
Transmission6 Speed
Final DriveChain
Front SuspensionTelescopic air assisted 140mm wheel travel
Rear SuspensionSingle shock swing arm 115mm wheel travel
Front Brakes2x 255mm discs
Rear BrakesDrum
Front Tyre100/90-16
Rear Tyre130/90-18
Wet-Weight271 kg
Fuel Capacity14 Litres
Standing 1/4 Mile12.6 sec / 164.5 km/h
Top Speed196.4 km/h