The Honda CTX 700N DCT is a motorcycle model that was produced between 2014 and 2015. It features a four-stroke, parallel-twin engine with a 670cc capacity and liquid cooling. The bike has a maximum power output of 38.1 kW and torque of 62 Nm. The Honda CTX 700N DCT has an automatic six-speed transmission that can also be used in manual mode. It has a chain final drive and a rigid tube steel diamond frame. The front suspension is 41mm telescopic forks, while the rear suspension features a single monoshock damper. The bike has a single 320mm hydraulic disc front brake with three-piston calipers and sintered metal pads. The rear brake is a single 240mm hydraulic disc with one-piston calipers and sintered metal pads. The front tyre is a 120/70-ZR17, and the rear tyre is 160/60-ZR17. The motorcycle has a length of 2195mm, a width of 790mm, and a height of 1440mm. It has a wheelbase of 1525mm and a seat height of 718.8mm. The fuel capacity is 12 litres.
Make Model: Honda CTX 700N DCT
Year: 2014 – 15
Engine: Four stroke , Parallel twin, SOHC, 4 valves per cylinder
Capacity: 670 cc / 40.8 cu-in
Bore x Stroke: 73 80 mm
Cooling System: Liquid-cooled
Compression Ratio: 10.7:1
Induction: PGM-FI electronic fuel injection
Ignition: Computer-controlled digital transistorised with electronic advance
Starting: Electric
Max Power: 38.1 kW / 51.1 hp @ 6250 rpm
Max Torque: 62 Nm / 46 lb-ft @ 4750 rpm
Clutch: Wet Multiplate
Transmission: Automatic six speed with two modes and a manual mode
Final Drive: Chain
Frame: Rigid tube steel diamond
Front Suspension: 41 mm telescopic forks,
Front Wheel Travel: 120 mm / 4.3 in
Rear Suspension: Single monoshock damper,
Rear Wheel Travel: 120 mm / 4.3 in
Front Brakes: Single 320 mm hydraulic disc 3 piston calipers and sintered metal pads
Rear Brakes: Single 240 mm hydraulic disc 1 piston caliper and sintered metal pads
Front Tyre: 120/70-ZR17
Rear Tyre: 160/60-ZR17
Rake: 27
Trail: 110 mm / 4.4 in
Dimensions: Length 2195 mm / 86.4 in Width 790 mm / 31.1 in Height 1440 mm / 56.6 in
Wheelbase: 1525 mm / 60.2 in
Seat Height: 718.8 mm / 28.3 in
Weight:
Fuel Capacity: 12 Litres / 3.17 gal
Husqvarna's 2027 FC 250 uses a 249.9 cc engine. The published engine layout is 1-cylinder,…
For the 2027 KTM 125 XC-W, the manufacturer's technical sheet lists a 124.8 cc engine.…
The 2026 Triumph Speed Twin 1200 Cafe Racer Edition has a manufacturer-listed displacement of 1200…
Kawasaki's 2027 KLX140R uses a 144 cc engine. The published engine layout is air-cooled, 4-stroke,…
For the 2027 Suzuki DR-Z4SM, the manufacturer's technical sheet lists a 398 cc engine. The…
The 2027 Yamaha TT-R110E has a manufacturer-listed displacement of 110 cc. Its engine specification is…