Honda SL125 (1972-73)

The Honda SL125 motorcycle was produced from 1972-73 and featured a four-stroke, single-cylinder engine with an OHC and 2 valves. It had a capacity of 125cc and a compression ratio of 9.5:1, as well as a wet sump lubrication system and Keihin carburetor induction. The ignition used points and a condenser, and the bike started with a kick. It had a maximum power output of 12 horsepower at 7900 rpm and a wet plate clutch with a 5-speed transmission and chain final drive. The front suspension consisted of a standard fork, and the rear suspension featured dual shocks. The front and rear brakes were both drum brakes, and the bike had a front tire size of 2.75-21 and a rear tire size of 3.25-18. It weighed 108 kg or 238.1 pounds and had a fuel capacity of 7.5 liters or 1.9 gallons.

---

Technical specifications:

Make Model: Honda SL 125

Year: 1972-73

Engine: Four stroke, single cylinder. OHC, 2 valve

Capacity: 125 cc / 7.4 cu-in

Bore x Stroke: 56.0 x 49.5 mm

Cooling System: Air cooled

Compression Ratio: 9.5:1

Lubrication: Wet sump

Induction: Keihin Carburetor

Ignition: Points and Condensor

Starting: Kick

Max Power: 12 hp / 8.8 kW @ 7900 rpm

Clutch: Wet plate

Transmission: 5 Speed

Final Drive: Chain

Front Suspension:

Rear Suspension: Dual shocks

Front Brakes: Drum

Rear Brakes: Drum

Front Tyre: 2.75-21

Rear Tyre: 3.25-18

Wet Weight: 108.0 kg / 238.1 lbs

Fuel Capacity: 7.5 Litres / 1.9 gal