Honda Monkey 125 ABS (2018-19)

The Honda Monkey 125 ABS is a motorcycle with a four-stroke, single cylinder, SOHC, 2-valve engine and a capacity of 124.9 cc. It has a compression ratio of 9.3:1 and is air-cooled with an oil capacity of 1.1 liters in the upper chamber and 0.9 liters in the lower chamber. The PGMFI electronic fuel injection system powers it, and it has an electronic CDI ignition along with an electric starter. This motorcycle can generate a maximum power of 9.2 hp at 7000 rpm and a maximum torque of 11 Nm at 5250 rpm. It comes with a 4-speed transmission and a chain final drive. The steel mono-backbone frame with upside-down telescopic front forks contributes to front suspension, while dual shocks at the rear address the rear suspension. The front wheel has a single 220 mm hydraulic disc with IMU-based ABS, while the rear wheel has a single 190mm hydraulic disc. It is fitted with 10-spoke cast aluminum wheels, and the front and rear wheels are sized 120/80-12 65J and 130/80-12 69J, respectively. The rake is 25.0 degrees, and the trail is 82mm. The motorcycle is 1710mm in length, 755mm in width, and 1029mm in height, with a wheelbase length of 1155mm. The Honda Monkey 125 ABS weighs 107kg, has a seat height of 776mm, a ground clearance of 160mm, and a fuel capacity of 5.6 liters.

Technical specifications:

Make Model: Honda Monkey 125 ABS

Year: 2018 – 19
Engine: Four stroke, single cylinder, SOHC, 2 valve
Capacity: 124.9 cc / 7.62 cu-in
Bore x Stroke: 52.4 x 57.9 mm
Compression Ratio: 9.3:1
Cooling System: Aircooled
Oil Capacity: Upper 1.1 Litres lower 0.9 Litres
Induction: PGMFI electronic fuel injection
Ignition: Electronic CDI
Starting: Electric
Battery: YTZ5S
Max Power: 9.2 hp / 6.9 kW @ 7000 rpm
Max Torque: 11 Nm / 8.1 ft.lbs @ 5250 rpm
Clutch: Wet multiplate
Transmission: 4 Speed
Final Drive: Chain
Frame: Steel mono-backbone frame
Front Suspension: Upside down telescopic forks
Front Wheel Travel: 100 mm / 3.9 in
Rear Suspension: Dual shocks
Rear Wheel Travel: 104 mm / 4.1 in
Front Brakes: Single 220 mm hydraulic disc with IMU-based ABS
Rear Brakes: Single 190 mm hydraulic disc
Front Wheel: 10 Spoke cast aluminium
Rear Wheel: 10 Spoke cast aluminium
Front Tyre: 120/80-12 65J
Rear Tyre: 130/80-12 69J
Rake: 25.0 degrees
Trail: 82 mm / 3.2 in
Dimensions: Length 1710 mm / 67.3 in Width 755 mm / 29.7 in Height 1029 mm / 40.5 in
Wheelbase: 1155 mm / 45.4 in
Seat Height: 776 mm / 30.5 in
Ground Clearance: 160 mm / 6.3 in
Wet Weight: 107 kg / 235.8 lbs
Fuel Capacity: 5.6 Litres / 1.45 US gal