The Honda CRE 125 Baja motorcycle was made by Honda in 2006, with a liquid-cooled two-stroke engine and a single cylinder. It has a capacity of 124cc and a compression ratio of 12.5:1. The bike uses a Dell`Orto 28mm carburetor for induction and CDI for ignition. The maximum power output is 29 hp or 21.2 kW at 10200 rpm, and the maximum torque is 20 Nm or 2.0 kg-fm. The clutch is wet plate and the transmission is a 6-speed, with a chain final drive. The frame is made of double cradle aluminum perimeter with a removable back, and has a front suspension composed of 46mm Kayaba USD telescopic forks with 290mm of travel. The rear suspension is a hydraulic shock absorber with adjustable extension and preload, offering 20 positions. The front brakes are a single 250mm disc with a 2 piston caliper, while the rear brakes are a single 220mm disc with 1 piston caliper. The front and rear tires have sizes 90/90-21 and 120/90-18 respectively. The bike has a wheelbase of 1455mm, a seat height of 920mm, a ground clearance of 330mm, and a dry weight of 99kg. Finally, it has a fuel capacity of 7.3 litres or 2.0 US gallons.
Make Model: Honda CRE 125 Baja Honda Moto s.p.a
Year: 2006 –
Engine: Two stroke, single cylinder
Capacity: 124 cc / 7.6 cu-in
Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…
Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…
The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…
The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…
The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…
The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…