Categories: Honda

Honda CBR250RR (2019)

The Honda CBR250RR (2019) motorcycle has a four-stroke, parallel twin-cylinder, DOHC engine with a capacity of 249.7cc. It has a liquid cooling system, a compression ratio of 11.5:1 and uses wet (pressing and spray) lubrication. The bike has PGM-FI induction with a throttle-by-wire system and an accelerator position sensor. It starts with electric power and has a maximum power of 36.3 hp at 12500 rpm and 23.3 Nm maximum torque at 10500 rpm. The CBR250RR has a wet multiplate with coil spring clutch and a 6-speed transmission. The bike has a truss frame and inverted front telescopic suspension. The rear suspension has five adjustable mono with pro-link suspension system aluminum swing arm. The front brake uses a single 310mm disc with a 2 piston caliper while the rear brake has a single 240mm disc with a 1 piston caliper. The front tyre measures 110/70-MC17, while the rear tyre measures 140/70-MC17. The CBR250RR measures 2060mm in length, 724mm in width, 1097mm in height with a wheelbase of 1389mm. The seat height is 790mm, ground clearance is 144mm, and the wet weight is 164.5kg. The bike has a 14.5-litre fuel capacity, and the wet weight ABS is 167.8kg.


Technical specifications:

Make Model: Honda CBR 250RR

Year: 2019

Engine: Four stroke, parallel twin cylinder, DOHC, 4 valve per cylinder

Capacity: 249.7 cc / 15.2 cu-in



Bore x Stroke: 62.3 x 41.4 mm

Cooling System: Liquid cooled

Compression Ratio: 11.5: 1

Lubrication: Wet (Pressing and Spray)

Induction: PGM-FI, Throttle-By-Wire System with Accelerator Position SensoR

Ignition: Full Transisterized, Battery

Starting: Electric

Max Power: 36.3 hp / 27.0 kW @ 12500 rpm

Max Torque: 23.3 Nm / 17.2 lb-ft @ 10500 rpm

Clutch: Wet multiplate with Coil Spring

Transmission: 6 Speed

Final Drive: #520 O-ring-sealed chain

Frame: Truss frame


Front Suspension: Inverted front telescopic suspension

Rear Suspension: Aluminum Swing Arm (5 Adjustable Mono With Pro-link Suspension System

Front Brakes: Single 310mm disc 2 piston caliper

Rear Brakes: Single 240mm disc 1 piston caliper

Front Tyre: 110/70-MC17

Rear Tyre: 140/70-MC17

Dimensions: Length 2060 mm / 81.1 in Width 724 mm / 28.5 in Height 1097 mm / 43.2 in

Wheelbase: 1389 mm / 54.7 in

Seat Height: 790 mm / 31.1 in

Ground Clearance: 144 mm / 5.7 in


Wet Weight: 164.5 kg / 363 lbs

Wet Weight ABS: 167.8 kg / 370 lbs

Fuel Capacity: 14.5 Litres / 3.8 US gal
admin

Recent Posts

Moto Guzzi V7 750 Sport Verde Legnano (1971)

Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…

7 months ago

Moto Guzzi V9 Roamer (2016-17)

Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…

7 months ago

Honda XL 600V Transalp (1996)

The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…

1 year ago

Yamaha FZ250 (1985)

The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…

1 year ago

Roehr eSuperBike / RR (2009)

The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…

1 year ago

BSA A65R (1964-72)

The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…

1 year ago