Honda CB75 Dream (1960-62)

The Honda CB75 Dream was a motorcycle model produced from 1960-62. It had an air-cooled four-stroke twin-cylinder SOHC engine with a capacity of 247.3. The bore x stroke was 54 x 54 mm, and the compression ratio was 8.3:1. The bike had a 6-volt magnetic flywheel for ignition and was started via the kick. The clutch was a wet multi-plates model, and the maximum power was 20 hp at 8000 rpm. The maximum torque was 18.3 NM at 5700 rpm. The transmission was a 4-speed with a chain drive. The front suspension used hydra lick forks, while the rear suspension used dual shocks. The front and back both featured drum brakes, and the bike’s front and rear tires sizes were 2.75-16 and 3.00-16 respectively. The bike’s dry weight was 169 kg, and its fuel capacity was 11.8 litres.

Technical specifications:

Make Model: Honda C 72 Dream

Year: 1960-62
Engine: Air cooled, four stroke, twin cylinder SOHC
Capacity: 247.3
Bore x Stroke: 54 x 54 mm
Compression Ratio: 8.3:1
Induction:
Ignition / Starting: 6 Volt Magnetic flywheel / KICK
Clutch: Wet multi-plates
Max Power: 14.6 kW 20 hp @ 8000 rpm
Max Torque: 18.3 NM @ 5700 rpm
Transmission / Drive: 4 Speed / chain
Front Suspension: Hydra lick forks
Rear Suspension: Dual chocks
Front Brakes: Drum
Rear Brakes: Drum
Front Tyre: 2.75-16
Rear Tyre: 3.00-16
Dry Weight: 169 Kg
Fuel Capacity: 11.8 Litres