Honda CB75 Dream (1959-64)

The Honda CB75 Dream motorcycle was produced between 1959-1964. It had a twin cylinder SOHC 2 valve per cylinder engine with an air cooled, four stroke. Its capacity was 124 CC with a bore of 44 mm and stroke of 41 mm. Its compression ratio was 8.6:1 and had a 6 Volt Magnetic flywheel with a KICK ignition starting system. The clutch was Wet multi-plates, and the maximum power generated by the motorcycle was 8.4 kW/ 11.5 hp at 10500 rpm. The maximum torque was 8.9 NM at 8200 rpm. The Honda CB75 Dream had a 4-speed transmission system with a chain drive. The front suspension of the motorcycle was Leading link, and the rear suspension was Swinging arm. It had drum brakes both at the front and rear. The front and rear tyre sizes of the motorcycle were 3.00-16. The dry weight of the Honda CB75 Dream was 242 lb, and it had a fuel capacity of 9 Litres.

Technical specifications:

Make Model: Honda CB 92

Year: 1959-64
Engine: Air cooled, four stroke, twin cylinder SOHC 2 valve per cylinder
Capacity: 124
Bore x Stroke: 44 x 41 mm
Compression Ratio: 8.6:1
Induction:
Ignition / Starting: 6 Volt Magnetic flywheel / KICK
Clutch: Wet multi-plates
Max Power: 8,4 kW/ 11.5 hp @ 10500 rpm
Max Torque: 8.9 NM @ 8200 rpm
Transmission / Drive: 4 Speed / chain
Front Suspension: Leading link
Rear Suspension: Swinging arm
Front Brakes: Drum
Rear Brakes: Drum
Front Tyre: 3.00-16
Rear Tyre: 3.00-16
Dry Weight: 242 lb
Fuel Capacity: 9 Litres