The Honda CB 600F Hornet was a motorcycle model produced in 1998-99. It had a four-stroke, transverse four-cylinder, DOHC, 4 valves per cylinder engine with a capacity of 599cc and a compression ratio of 12.0:1. The bike had four 34mm carbs for induction and computer-controlled digital transistorised ignition with electronic advance. Its maximum power output was 97.5 hp at 12000 rpm, while its maximum torque was 65.6 Nm at 10000 rpm. The transmission had six speeds, and the final drive was by chain. The bike had a steel backbone frame, with telescopic forks in front and a monoshock preload-adjustable suspension at the rear. The front wheel had two 296mm discs and 2 piston calipers, while the rear had a single 220mm disc and 1 piston caliper. The bike had a length of 2055 mm, a width of 745 mm, and a height of 1070 mm. The wheelbase was 1425 mm, and the seat height was 790 mm. The fuel capacity was 16 liters, and the fuel consumption average was 17 km/lit. The bike had good braking performance, with a 60-0 stopping distance of 13.3 meters and a 100-0 stopping distance of 38.3 meters. Its top speed was 226.6 km/h, and it could complete a quarter-mile in 11.4 seconds at a speed of 192.2 km/h.
Make Model: Honda CB 600F Hornet
Year: 1998-99
Engine: Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder
Capacity: 599 cc / 36.5 cu-in
Bore x Stroke: 65 x 45.2 mm
Cooling System: Liquid cooled,
Compression Ratio: 12.0:1
Lubrication: Wet sump
Engine Oil: Semi-Synthetic, 10W/40
Induction: 4x 34mm carbs
Ignition: Computer-controlled digital transitorised with electronic advance
Spark Plug: NGK, CR9EH-9
Starting: Electric
Max Power: 97.5 hp / 71.1 kW @ 12000 rpm
Max Power Rear Tyre: 84.3 hp / 62.8 kW @ 11400 rpm
Max Torque: 65.6 Nm / 6.83 kg-m @ 10000 rpm
Clutch: Wet, multiple discs, cable operated
Transmission: 6 Speed
Final Drive: Chain
Frame: Steel, Backbone frame
Front Suspension: 41mm Telescopic forks
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Monoshock preload adjustable.
Rear Wheel Travel: 128 mm / 4.9 in
Front Brakes: 2x 296mm discs 2 piston calipers
Rear Brakes: Single 220mm disc 1 piston caliper
Front Wheel: 16xMT3.50 hollow-section triple-spoke cast aluminium
Rear Wheel: 17xMT5.00 hollow-section triple-spoke cast aluminium
Front Tyre: 130/70ZR16 (61W) (Michelin Bridgestone)
Rear Tyre: 180/55ZR17 (73W) (Michelin Bridgestone)
Rake: 26 degrees
Trail: 96 mm / 3.7 in
Dimensions: Length 2055 mm / 80.9 in Width 745 mm / 29.3 in Height 1070 mm / 42.1 in
Wheelbase: 1425 mm / 55.9 in
Seat Height: 790 mm / 31.1 in
Ground Clearance:: 140 mm / 5.5 in
Dry Weight: 176 kg / 388.0 lbs
Wet Weight: 198 kg / 456.5 lbs
Fuel Capacity: 16 Litres / 3.6 gal
Consumption Average: 17 km/lit
Braking 60 – 0 / 100 – 0: 13.3 m / 38.3 m
Standing 1/4 Mile: 11.4 sec /192.2 km/h
Top Speed: 226.6 km/h
Husqvarna's 2027 FC 250 uses a 249.9 cc engine. The published engine layout is 1-cylinder,…
For the 2027 KTM 125 XC-W, the manufacturer's technical sheet lists a 124.8 cc engine.…
The 2026 Triumph Speed Twin 1200 Cafe Racer Edition has a manufacturer-listed displacement of 1200…
Kawasaki's 2027 KLX140R uses a 144 cc engine. The published engine layout is air-cooled, 4-stroke,…
For the 2027 Suzuki DR-Z4SM, the manufacturer's technical sheet lists a 398 cc engine. The…
The 2027 Yamaha TT-R110E has a manufacturer-listed displacement of 110 cc. Its engine specification is…