Categories: Honda

Honda CB 500x (2017-18)

The Honda CB 500X motorcycle is a 2017-18 model. It has a four-stroke, parallel-twin, DOHC engine with a capacity of 471cc/28.7 cu-in. The compression ratio is 10.7:1 and it is liquid-cooled with an oil capacity of 3.2 litres. The induction system is PGM-FI with 34mm throttle bodies and the ignition is computer-controlled digital transistorized with electronic advance. The starting system is electric and the maximum power output is 46.9 hp/35 kW at 8500 rpm. The clutch is wet multiplate and the transmission has six speeds with an O-ring-sealed chain. The frame is made of steel and is diamond-shaped with a conventional telescopic 41mm fork front suspension and Prolink mono rear suspension with nine-stage preload adjuster and steel square pipe swingarm. The front and rear brakes are single 320mm wave discs with two-piston calipers and single 240mm wave discs with one-piston calipers, respectively. The front and rear wheels are multi-spoke aluminium cast with front and rear tyre size of 120/70-17 and 160/60-17, respectively. The dimensions of the motorcycle are length 2095 mm, width 830 mm, height 1290 mm, and a wheelbase of 1421mm with a seat height of 810mm and ground clearance of 170mm. The motorcycle weighs 195kg and has a fuel capacity of 17.3 litres or 4.5 US gallons.


Technical specifications:

Make Model: Honda CB 500X

Year: 2017 – 18

Engine: Four stroke, parallel-twin, DOHC; 4 valves per cylinder

Capacity: 471 cc / 28.7 cu-in



Bore x Stroke: 67.0 x 66.8 mm

Compression Ratio: 10.7:1

Cooling System: Liquid cooled

Oil Capacity: 3.2 Litres

Induction: PGM-FI with 34mm throttle bodies

Ignition: Computer-controlled digital transistorized with electronic advance

Headlightsight: 60/55W x 1 l

Battery: 12V 8.6AH

Starting: Electric

Max Power: 46.9 hp / 35 kW @ 8500 rpm

Max Power Rear Wheel: 42.9 hp / 31.9 kW @ 8500 rpm

Max Torque: 43 Nm / 31.7 lb-ft @ 7000 rpm

Clutch: Wet multiplate


Transmission: 6 Speed

Final Drive: O-ring-sealed chain

Frame: Steel, Diamond

Front Suspension: Conventional Telescopic, 41mm forks

Front Wheel Travel: 139.7 mm / 5.5 in

Rear Suspension: Prolink mono with 9 stage Preload adjuster, steel square pipe swingarm

Rear Wheel Travel: 119.3 mm / 4.7 in

Front Brakes: Single 320mm wave disc 2 piston calipers

Rear Brakes: Single 240mm wave disc 1 piston calipers

Front Wheel: Multi-Spoke Aluminium Cast


Rear Wheel: Multi-Spoke Aluminium Cast

Front Tyre: 120/70-17

Rear Tyre: 160/60-17

Rake: 26.5 degrees

Trail: 108 mm / 4.25 in

Dimensions: Length 2095 mm / 82.4 in Width 830 mm / 32.6 in Height 1290 mm / 50.7 in

Wheelbase: 1421 mm / 55.9 in

Seat Height: 810 mm / 31.9 in

Ground Clearance: 170 mm / 6.6 in

Wet Weight: 195 kg / 430 lbs


Fuel Capacity: 17.3 Litres / 4.5 US gal
admin

Share
Published by
admin

Recent Posts

Moto Guzzi V7 750 Sport Verde Legnano (1971)

Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…

7 months ago

Moto Guzzi V9 Roamer (2016-17)

Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…

7 months ago

Honda XL 600V Transalp (1996)

The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…

1 year ago

Yamaha FZ250 (1985)

The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…

1 year ago

Roehr eSuperBike / RR (2009)

The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…

1 year ago

BSA A65R (1964-72)

The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…

1 year ago