Harley Davidson XL 1200N Nightster (2011-12)

The Harley Davidson XL 1200N Nightster is a motorcycle that was produced between 2011 and 2012. It has a four-stroke, 45 degrees V-Twin Evolution engine with a capacity of 1199cc. The bore x stroke measurements are 88.8 x 96.8 mm and the compression ratio is 9.7:1. The Nightster uses pushrod-operated, OHV, 2 valves per cylinder valve train and has electronic sequential port fuel injection (ESPFI) as the induction system. The maximum torque for this motorcycle is 107.3 Nm / 79 lb-ft at 4000 rpm. It uses a clutch that is wet and has nine plates. The transmission is 5-speed, with the final drive using a belt and the primary drive using a chain with a 57/38 ratio. The frame is made of mild steel tubing with cast junctions, and the swingarm uses mild steel rectangular tubing with MIG welding. The front suspension consists of 39mm fork tubes, while the rear has a coil-over, dual-adjustable preload. The front and rear brakes both use a single 292mm disc. The front and rear tires are 100/90B19 57H and 150/80B16 77H, respectively, with a rake of 30.5 degrees and a trail of 117mm / 4.8 in. The dimensions for the Nightster are 2179 mm / 85.8 in in Length, a wheelbase of 1519 mm / 59.8 in, a laden seat height of 653 mm / 25.7 in, an unladen seat height of 683 mm / 26.9 in, and a ground clearance of 100 mm / 4.7 in. The dry weight of the motorcycle is 252 kg / 335 lbs, and the wet weight is 301 kg / 665 lbs. The fuel capacity is 12.5 litres / 3.3 US gal.

---

Technical specifications:

Make Model: Harley Davidson XL 1200N Nightster

Year: 2011 – 12

Engine: Fur stroke, 45 degrees V-Twin Evolution (R) Valve Train Pushrod-operated, OHV, 2 valves per cylinder

Capacity: 1199 cc / 73.2 cu-in

Bore x Stroke: 88.8 x 96.8 mm

Cooling System: Air cooled

Compression Ratio: 9.7:1

Lubrication: Dry-sump

Induction: Electronic Sequential Port Fuel Injection (ESPFI)

Ignition: Digital CDI

Starting: Electric

Max Torque: 107.3 Nm / 79 lb-ft @ 4000 rpm

Clutch: Wet 9-plate

Transmission: 5 Speed

Final Drive: Belt

Primary Drive: Chain, 57/38 ratio

Gear Ratio: 1st 9.315 2nd 6.653 3rd 4.948 4th 4.102 5th 3.517

Frame: Mild steel, tubular frame, circular sections, cast junctions Swingarm Mild steel rectangular tube sections, stamped junctions, MIG welded

Front Suspension: 39mm Forks

Rear Suspension: Coil-over, dual-adjustable preload

Front Brakes: Single 292mm disc 2 piston calipers

Rear Brakes: Single 292mm disc 1 piston caliper

Front Tyre: 100/90B19 57H

Rear Tyre: 150/80B16 77H

Rake: 30.5 degrees

Trail: 117 mm / 4.8 in

Dimensions: Length 2179 mm / 85.8 in

Wheelbase: 1519 mm / 59.8 in

Seat Height: Laden 653 mm / 25.7 in Unladen 683 mm / 26.9 in

Ground Clearance: 100 mm / 4.7 in

Dry Weight: 252 kg / 335 lbs

Wet Weight: 301 kg / 665 lbs

Fuel Capacity: 12.5 Litres / 3.3 US gal