Harley Davidson FXDB Dyna Glide Daytona (1992)

The Harley Davidson FXDB Dyna Glide Daytona motorcycle was produced in 1992 and is equipped with a four-stroke, V-twin engine with a capacity of 1337cc, producing a maximum power of 67 horsepower and a maximum torque of 97Nm. The engine has two valves per cylinder, air cooling, and a dry sump lubrication system. Other features of the motorcycle include a 38mm Keihin carburetor, analog CDI ignition, and a wet 9-plate clutch. The transmission is a five-speed system, and the final drive is a belt. The motorcycle has a mild steel, tubular frame with rectangular section backbone, stamped, cast and forged junctions, forged fender supports, and MIG welded. The front suspension features 49mm with polished aluminum fork triple clamp and dual-rate springs, while the rear suspension is a coil-over shock. The front brakes are two 292mm discs, and the rear brake is a single 292mm disc. The tires are 100/90-19 on the front and 130/90-16 on the rear. The dry weight of the motorcycle is 271.0 kg, and the fuel capacity is 16 liters or 4.2 US gallons.

Technical specifications:

Make Model: Harley Davidson FXDB Dyna Glide Daytona

Year: 1992
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 1337 cc / 81.5 cu-in
Bore x Stroke: 88.8 x 108 mm
Cooling System: Air cooled
Compression Ratio: 8.5:1
Lubrication: Dry sump
Induction: 38mm Keihin carburetor
Ignition: Analogue CDI
Starting: Electric
Max Power: 67 hp / 48.9 kW @ 6000 rpm
Max Torque: 97 Nm / 71.5 lb-ft @ 2350 rpm
Clutch: Wet 9-plate
Transmission: 5 Speed
Final Drive: Belt
Frame: Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded
Front Suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs
Rear Suspension: Coil over shock
Front Brakes: 2x 292mm discs
Rear Brakes: Single 292mm disc
Front Tyre: 100/90-19
Rear Tyre: 130/90-16
Dry Weight: 271.0 kg / 597.5 lbs
Fuel Capacity: 16 Litres / 4.2 US gal