Harley Davidson FLS Softail Slim (2014-15)

The Harley Davidson FLS Softail Slim motorcycle was produced between 2014 and 2015. Its engine is a four-stroke, Twin Cam 103B with pushrod-operated valves and hydraulic, self-adjusting lifters, with a capacity of 1690 cc. It has an air-cooled cooling system and a compression ratio of 9.6:1. The motorcycle comes with electronic sequential port fuel injection and electronic ignition, and it has a maximum torque of 132 Nm at 3250 rpm. The transmission is 6-speed, and the final drive is a belt. The frame is made of mild steel, and the swingarm is made of round tube sections with forged junctions that are MIG welded. The lean angle, left and right, are 24 degrees and 24.9 degrees, respectively. The front suspension is a 41.3 mm telescopic system with beer can covers, while the rear suspension is a hidden, horizontal-mounted, coil-over design. The motorcycle has a single 292 mm disc with a 4 piston caliper in the front and a single 292 mm disc with a 2 piston caliper in the rear. The wheels are black, laced steel, and the front and rear tyres are MT90B16 and MU85B16, respectively. The rake is 32 degrees, the trail is 147 mm, and the length is 2350 mm. The wheelbase is 1635 mm, and the seat height is 605 mm when laden and 658 mm when unladen. The motorcycle has a ground clearance of 115 mm, and its dry weight is 308 kg while its wet weight is 321 kg. It comes with an oil capacity of 3.3 litres and a fuel capacity of 18.9 litres.

---

Technical specifications:

Make Model: Harley Davidson FLS Softail Slim

Year: 2014 – 15

Engine: Four stroke, Twin Cam 103B Valves Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters; two valves per cylinder

Capacity: 1690 cc / 103.1 cub in.

Bore x Stroke: 98.4 x 111.1 mm

Cooling System: Air-cooled

Compression Ratio: 9.6:1

Exhaust: Chrome, over/under shotgun exhaust with slash-cut mufflers

Induction: Electronic Sequential Port Fuel Injection (ESPFI)

Ignition: Electronic

Starting: Electric

Max Torque: 132 Nm / 13.5 kgf-m / 97.4 ft/lb @ 3250 rpm

Transmission: 6 Speed

Final Drive: Belt

Primary Drive: Chain, 34/46 ratio

Gear Ratio: 1st 9.311 / 2nd 6.454 / 3rd 4.793 / 4th 3.882 / 5th 3.307 / 6th 2.79:1

Frame: Frame Mild steel tubular frame; rectangular section backbone; stamped, cast, and forged junctions; forged fender supports; MIG welded Swingarm Mild steel, round tube sections, forged junctions; MIG welded

Lean Angle, Left: 24o

Lean Angle, Right: 24.9o

Front Suspension: 41.3 mm telescopic, beer can covers

Rear Suspension: Hidden, horizontal-mounted, coil-over

Front Brakes: Single 292 mm discs, 4 piston caliper

Rear Brakes: Single 292 mm disc, 2 piston caliper

Front Wheel: Black, Laced Steel

Rear Wheel: Black, Laced Steel

Front Tyre: MT90B16 72H

Rear Tyre: MU85B16 77H

Rake: 32 degrees

Trail: 147 mm / 5.8 in

Trail: Length 2350 mm / 92.5 in

Wheelbase: 1635 mm / 64.3 in

Seat Height: Laden 605 mm / 23.8 in. Unladen 658 mm / 25.9 in.

Ground Clearance: 115 mm / 4.5 in

Dry Weight: 308 kh / 679 lbs

Wet Weight: 321 kg / 708 lbs

Gross Vehicle Weight Rating: 526.0 kg / 1160 lbs

Oil Capacity: 3.3 Litres / 3.5 US qt

Fuel Capacity: 18.9 Litres / 5.0 US gal