Harley Davidson FLHS 1340 Electra Glide (1980-82)

The Harley Davidson FLHS 1340 Electra Glide was produced from 1980-82 and has a four stroke, 45 degrees V-Twin engine with a 1337cc capacity and 2 valves per cylinder. It has an air-cooling system with a bore x stroke of 88.8 x 108.0 mm and a compression ration of 8.5:1. The induction for this motorcycle uses a 38mm Keihin carburetor and has solid state electronic ignition. The bike starts with electric power and reaches a maximum power of 67 hp/48.9 hp @ 5000 rpm and maximum torque of 69 lb-ft @ 3000 rpm. The motorcycle has a four-speed transmission and chain final drive. The front suspension uses telescopic forks and the rear suspension uses dual shocks swinging arm. For brakes, the bike has a single 254mm disc with a 1 piston caliper for the front and rear wheels. The bike also includes an MT90-16T tire for the front and an MT90-16 tire for the rear. This motorcycle is relatively heavy, weighing 343 kg / 756 lbs with a fuel capacity of 19 Liters / 5.0 US gal.

Technical specifications:

Make Model: Harley Davidson FLHS 1340 Electra Glide

Year: 1980 – 82
Engine: Four stroke, 45 degrees V-Twin, OHV, 2 valves per cylinder.
Capacity: 1337 cc / 81.7 cu-in
Cooling System: Air cooled
Bore x Stroke: 88.8 x 108.0 mm
Compression Ratio: 8.5:1
Induction: 38mm Keihin Carburettor
Ignition: Solid state electronic
Starting: Electric
Max Power: 67 hp / 48.9 hp @ 5000 rpm
Max Torque: 69 lb-ft @ 3000 rpm
Transmission / Drive: 4 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Dual shocks swinging arm
Front Brakes: Single 254mm disc 1 piston caliper
Rear Brakes: Single 254mm disc 1 piston caliper.
Front Tyre: MT90-16T
Rear Tyre: MT90-16
Dry Weight: 343 kg / 756 lbs
Fuel Capacity: 19 Litres / 5.0 US gal