Categories: Harley-Davidson

Harley Davidson CVO Limited (2019)

The Harley Davidson CVO Limited 2019 motorcycle has a four-stroke, V-Twin, Milwaukee-Eight 117 engine with a capacity of 1923 cc / 117 cu-in, which generates a maximum torque of 169 Nm / 124.6 lb-ft @ 3500 rpm. It has a six-speed transmission and a primary drive chain with a 34/46 ratio, while the final drive is a belt. The motorcycle has a Gloss Black and Contrast Chrome Slicer wheels combination and is fitted with a Showa dual bending valve front suspension, while the rear suspension is an Emulsion rear suspension with hand-adjustable pre-load. It comes with caliper type 32 mm, 4-piston fixed brakes on both the front and rear wheels. The fuel capacity of the CVO Limited is 22.7 Litres / US 6.0 gal, while the oil capacity is 4.7 Litres / US 5 qts. The bike has a length of 2600 mm / 102.4 in and a wheelbase of 1625 mm / 64.0 in, with a seat height of 760 mm / 29.9 in and a ground clearance of 125 mm / 4.9 in. It weighs 411 kg / 906 lbs dry and 428 kg / 944 lbs wet. The lean angle on the left is 33.4 degrees and on the right is 34.3 degrees. In general, this bike is designed not for speed, but for a more comfortable ride.


Technical specifications:

Make Model: Harley Davidson CVO Limited

Year: 2019

Engine: Four stroke, V-Twin, Milwaukee-Eight 117, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder

Capacity: 1923 cc / 117 cu-in



Bore x Stroke: 103.5 X 114.3 mm

Cooling System: Air cooled

Compression Ratio: 10.2:1

Exhaust: Dual, with crossover

Induction: Electronic Sequential Port Fuel Injection

Lubrication: Pressurized, dry-sump with oil cooler

Ignition: Single-fire, non-wasted, map-controlled spark ignition

Starting: Electric

Max Torque: 169 Nm / 124.6 lb-ft @ 3500 rpm

Transmission: 6 Speed

Primary Drive: Chain, 34/46 ratio

Final Drive: Belt

Gear Ratio: 1st 9.593 2nd 6.65 3rd 4.938 4th 4 5th 3.407 6th 2.875


Lean Angle, Left: 33.4 o

Lean Angle, Right: 34.3 o

Front Suspension: Showa dual bending valve front suspension

Rear Suspension: Emulsion rear suspension with hand-adjustable pre-load

Front Brakes: Caliper Type 32 mm, 4-piston fixed

Rear Brakes: Caliper Type 32 mm, 4-piston fixed

Front Wheel: Gloss Black and Contrast Chrome Slicer

Rear Wheel: Gloss Black and Contrast Chrome Slicer

Front Tyre: 130/80B17 65H

Rear Tyre: 180/65B16 81H


Rake: 26 degrees

Trail: 170 mm / 6.7 in

Dimensions: Length 2600 mm / 102.4 in

Wheelbase: 1625 mm / 64.0 in

Seat Height: 760 mm / 29.9 in

Ground Clearance: 125 mm / 4.9 in

Dry Weight: 411 kg / 906 lbs

Wet Weight: 428 kg / 944 lbs

Oil Capacity: 4.7 Litres / US 5 qts

Fuel Capacity: 22.7 Litres / US 6.0 gal

admin

Share
Published by
admin

Recent Posts

Moto Guzzi V7 750 Sport Verde Legnano (1971)

Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…

7 months ago

Moto Guzzi V9 Roamer (2016-17)

Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…

7 months ago

Honda XL 600V Transalp (1996)

The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…

1 year ago

Yamaha FZ250 (1985)

The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…

1 year ago

Roehr eSuperBike / RR (2009)

The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…

1 year ago

BSA A65R (1964-72)

The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…

1 year ago