Derbi Senda SM 125 4T Baja (2006)

The Derbi Senda SM 125 4T Baja is a motorcycle produced in 2006 with a four stroke, single cylinder, OHC engine and a capacity of 124 cc. The bike has a compression ratio of 11.0:1 and uses a 22mm Keihin induction system with electronic ignition. It has a maximum power output of 9 kW or 12 hp at 6500 rpm, and maximum torque of 9 Nm or 6.6 lb-ft at the same rpm. The transmission is a five-speed, multiplate clutch system with chain final drive. The front suspension comprises 41mm Paoli forks, with a travel of 195 mm or 7.6 in, while the rear suspension uses a Paoli monoshock, with a travel of 170 mm or 6.7 in. Braking is handled by a single 300mm disc at the front and a single 220mm disc at the rear. The bike comes with 110/80 -17 front and 130/70 -17 rear tyres, and has a seat height of 830 mm or 32.7 in. Its dry weight is 116 kg or 255.7 lbs, with a fuel capacity of 7.5 liters or 2.0 US gal.

Technical specifications:

Make Model: Derbi Senda SM 125 4T Baja

Year: 2006
Engine: Four stroke, single cylinder. OHC
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 56 x 49 mm
Cooling System: Air cooled
Compression Ratio: 11.0:1
Induction: 22mm Keihin
Ignition: Electronic
Starting: Electric
Max Power: 9 kW / 12 hp @ 6500 rpm
Max Torque: 9 Nm / 6.6 lb-ft @ 6500 rpm
Clutch: Multiplate
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 41mm Paoli forks
Front Wheel Travel: 195 mm / 7.6 in
Rear Suspension: Paoli monoshock
Rear Wheel Travel: 170 mm / 6.7 in
Front Brakes: Single 300mm disc
Rear Brakes: Single 220mm disc
Front Tyre: 110/80 -17
Rear Tyre: 130/70 -17
Seat Height: 830 mm / 32.7 in
Dry Weight: 116 kg / 255.7 lbs
Fuel Capacity: 7.5 Litres / 2.0 US gal