Derbi Senda SM 125 4T (2004-07)

The Derbi Senda SM 125 4T motorcycle was manufactured between 2004 and 2007. It is powered by a four-stroke, single-cylinder, OHC engine with a capacity of 124 cc. The cooling system is air-cooled and the compression ratio is 11.0:1. The induction is provided by a 22mm Keihin carburetor and the ignition is electronic. The motorcycle has an electric starter and is capable of producing maximum power of 9 kW or 12 hp at 6500 rpm and maximum torque of 9 Nm or 6.6 lb-ft at the same rpm. The clutch is multiplate and the motorcycle has 5-speed transmission with a final drive of chain. It has a 41mm Paoli fork front suspension with a travel of 195 mm or 7.6 in, and a Paoli monoshock rear suspension with a travel of 170 mm or 6.7 in. The front brake is a single 300mm disc and the rear brake is a single 220mm disc. The front and rear tires are 110/80-17 and 130/70-17 respectively. The seat height is 830 mm or 32.7 in, and the dry weight is 116 kg or 255.7 lbs. The motorcycle has a fuel capacity of 7.5 liters or 2.0 US gallons.

Technical specifications:

Make Model: Derbi Senda SM 125 4T

Year: 2004 – 07
Engine: Four stroke, single cylinder. OHC
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 56 x 49 mm
Cooling System: Air cooled
Compression Ratio: 11.0:1
Induction: 22mm Keihin
Ignition: Electronic
Starting: Electric
Max Power: 9 kW / 12 hp @ 6500 rpm
Max Torque: 9 Nm / 6.6 lb-ft @ 6500 rpm
Clutch: Multiplate
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 41mm Paoli forks
Front Wheel Travel: 195 mm / 7.6 in
Rear Suspension: Paoli monoshock
Rear Wheel Travel: 170 mm / 6.7 in
Front Brakes: Single 300mm disc
Rear Brakes: Single 220mm disc
Front Tyre: 110/80 -17
Rear Tyre: 130/70 -17
Seat Height: 830 mm / 32.7 in
Dry Weight: 116 kg / 255.7 lbs
Fuel Capacity: 7.5 Litres / 2.0 US gal