Derbi Senda 125R 4T (2004-07)

The Derbi Senda R 125 4T motorcycle was produced between 2004 and 2007. It has a four-stroke, single-cylinder engine with a capacity of 124cc and a compression ratio of 11.0:1. The bike has an electric start and can reach a maximum power of 9 kW / 12 hp at 6500 rpm and a maximum torque of 9 Nm / 6.6 lb-ft at 6500 rpm. The clutch is multiplate and the transmission is 5-speed. The final drive is done via a chain. The motorcycle has a front suspension featuring 41mm Paoli forks, while the rear suspension uses a Paoli monoshock. The Braking system has a single 260mm disc in the front and a single 220mm disc at the rear. The wheelbase of the bike stands at 1450 mm / 57.1 in and it has a dry weight of 118 kg / 269 lbs. The fuel capacity is 7.5 litres or 2.0 US gal. The bike can reach the top speed of 97.3 km/h and hit the standing-quarter mile in 12.4 seconds.

Technical specifications:

Make Model: Derbi Senda R 125 4T

Year: 2004 – 07
Engine: Four stroke, single cylinder. OHC
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 56 x 49 mm
Cooling System: Air cooled
Compression Ratio: 11.0:1
Induction: 22mm Keihin
Ignition: Electronic
Starting: Electric
Max Power: 9 kW / 12 hp @ 6500 rpm
Max Torque: 9 Nm / 6.6 lb-ft @ 6500 rpm
Clutch: Multiplate
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 41mm Paoli forks
Front Wheel Travel: 195 mm / 7.6 in
Rear Suspension: Paoli monoshock
Rear Wheel Travel: 170 mm / 6.7 in
Front Brakes: Single 260mm disc
Rear Brakes: Single 220mm disc
Front Tyre: 80/90 -21
Rear Tyre: 180/80 -18
Wheelbase: 1450 mm / 57.1 in
Dry Weight: 118 kg / 269 lbs
Fuel Capacity: 7.5 Litres / 2.0 US gal
Standing 1/4 Mile: 12.4 sec
Top Speed: 97.3 km/h