Derbi Senda 125R 4T (1999-03)

The Derbi Senda R 125 4T was a motorcycle produced from 1999-03. It has a four-stroke, single-cylinder engine with a capacity of 124cc, and an OHC system with air cooling. It has a max power of 9 kW/12 hp at 6500 rpm and a max torque of 9 Nm/6.6 lb-ft at 6500 rpm. The transmission is a 5-speed chain drive. The front suspension consists of 41mm Paoli forks, and the rear suspension is a Paoli monoshock. The front and rear brakes are single discs, and the front tyre is 80/90-21, while the rear tyre is 180/80-18. The wheelbase is 1450 mm/57.1 in, and the dry weight is 118 kg/269 lbs. The fuel capacity is 7.5 litres/2.0 US gal. The standing 1/4 mile time is 12.4 seconds, and the top speed is 97.3 km/h.

Technical specifications:

Make Model: Derbi Senda R 125 4T

Year: 1999 – 03
Engine: Four stroke, single cylinder. OHC
Capacity: 124 cc / 7.6 cu-in
Bore x Stroke: 56 x 49 mm
Cooling System: Air cooled
Compression Ratio: 11.0:1
Induction: 22mm Keihin
Ignition: Electronic
Starting: Electric
Max Power: 9 kW / 12 hp @ 6500 rpm
Max Torque: 9 Nm / 6.6 lb-ft @ 6500 rpm
Clutch: Multiplate
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 41mm Paoli forks
Front Wheel Travel: 195 mm / 7.6 in
Rear Suspension: Paoli monoshock
Rear Wheel Travel: 170 mm / 6.7 in
Front Brakes: Single 260mm disc
Rear Brakes: Single 220mm disc
Front Tyre: 80/90 -21
Rear Tyre: 180/80 -18
Wheelbase: 1450 mm / 57.1 in
Dry Weight: 118 kg / 269 lbs
Fuel Capacity: 7.5 Litres / 2.0 US gal
Standing 1/4 Mile: 12.4 sec
Top Speed: 97.3 km/h