The Can-Am Spyder F3-S motorcycle was produced from 2015-2016. It had a Rotax 1330 ACE engine with a transverse three cylinder configuration and an electronic fuel injection system. The engine had a bore x stroke of 84 x 80 mm and a compression ratio of 12.2:1. The bike produced a maximum power output of 115 hp at 7250 rpm and a maximum torque of 130 Nm at 5000 rpm. The clutch was wet and multi-plate, and the transmission had six speeds. The front suspension was double A-arms with anti-roll bars, and the rear suspension was a swing-arm with a SACHS shock absorber. The bike had foot-activated, fully-integrated hydraulic 3-wheel braking, with a single 270mm disc and 4-piston caliper per wheel in the front and a single 270mm disc and 2-piston caliper with an integrated parking brake in the rear. The front and rear rims were made of aluminum and had metallic silver finish, with the front rim being 15×5 inches and the rear rim being 15×7 inches. The front tire had dimensions of MC165/55R15 55H, while the rear tire measured MC225/50R15 76H. The bike had a length of 2642 mm, width of 1497 mm, and height of 1099 mm, with a wheelbase of 1709 mm and a ground clearance of 115 mm. The dry weight of the bike was 386 kg, with a fuel capacity of 27 liters and a maximum vehicle load of 199 kg. The bike had storage capacity of 24.4 liters.
Make Model: BRP Can Am Spyder F3-S
Year: 2015 – 16
Engine: Rotax 1330 ACE, four stroke, transverse three cylinder, DOHC, 4 valve per cylinder
Capacity: 1330cc / 81.1 cu-in
Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…
Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…
The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…
The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…
The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…
The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…