MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Cagiva Specifications

Cagiva SST350 (1979-83)

Entry updated

Cagiva SST350 (1979-83)

At a glance

Capacity
341 cc / 21.3 cu-in
Power
27 hp / 20 kW @ 7000 rpm
Seat height
828 mm / 32.6 in

The full picture.

The Cagiva SST350 motorcycle was produced from 1979-1983. It featured a two-stroke, single cylinder engine with a 341cc capacity, and had a compression ratio of 9.6:1. The bike had a 34mm Dell’Orto carburetor and a battery & coil ignition system, later switched to an electronic CDI. The SST350 had both electric and kick starting options and produced a maximum power of 27 hp at 7000rpm. The clutch was a wet multi-plate system and it had a 5-speed transmission with final drive chain. The bike had a Ceriant telescopic fork suspension for the front and a pivoted fork and Betor dampers with 3-way adjustment for the rear. It had a single disc front brake and a drum rear brake. The front and rear tires were 3.25-19 and 4.00-18 respectively. The SST350 had a seat height of 828mm and a dry weight of 114kg. It could hold 10.5 liters of fuel, had a consumption average of 55mpg, and could go up to a top speed of 90.3mph. Its standing 1/4 mile time was 15.7 seconds.


Technical specifications:

Make Model: Cagiva SST350

Motorcycle technical specifications
Year1979 – 83
EngineTwo stroke, single cylinder
Capacity341 cc / 21.3 cu-in
Bore x Stroke80 x 68 mm
Cooling SystemAir cooled
Compression Ratio9.6:1
Induction34mm Dell’Orto
IgnitionBattery & coil later Electronic CDI
StartingElectric & kick
Max Power27 hp / 20 kW @ 7000 rpm
ClutchWet multi-plate
Transmission5 Speed
Final DriveChain
Front SuspensionOil damper Ceriant telescopic fork
Rear SuspensionPivoted fork and Betor dampers 3-way adjustment
Front BrakesSingle disc
Rear BrakesDrum
Front Tyre3.25 -19
Rear Tyre4.00 -18
Seat Height828 mm / 32.6 in
Dry Weight114 kg / 252 lbs
Fuel Capacity10.5 Litres / 2.7 US gal
Consumption average55 mpg
Standing 1/4 Mile15.7 sec
Top Speed90.3 mph