MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Cagiva Specifications

Cagiva SST250 (1979-83)

Entry updated

Cagiva SST250 (1979-83)

At a glance

Capacity
243 cc / 15 cu-in
Power
17 HP / 12.4 kW @ 7000 rpm

The full picture.

The Cagiva SST 250 and Chopper were introduced in 1979 and produced until 1983. They were both air-cooled, two-stroke, single-cylinder motorcycles with a capacity of 243 cc and a compression ratio of 10.6:1. The models had a Dell’Orto carburetor and used a battery and coil ignition system, later replaced by an electronic CDI. The motorcycles had a maximum power output of 17 HP at 7000 RPM and a 5-speed transmission with chain final drive.

The front suspension of the bike featured an oil damper Ceriant telescopic fork, while the rear suspension used a pivoted fork and Betor dampers with 3-way adjustment. The front brakes were a single disc, while the rear brakes were drums. The SST 250 weighed 143 kg and had a fuel capacity of 10.5 liters.

The Yamaha XS250S, Cagiva SST250, and Suzuki GS250T all underwent road tests by Which Bike in 1980.


Technical specifications:

Make Model: Cagiva SST 250 & Chopper

Motorcycle technical specifications
Year1979 – 83
EngineAir cooled, two stroke, single cylinder,
Capacity243 cc / 15 cu-in
Bore x Stroke72 x 59.6 mm
Cooling SystemAir cooled
Compression Ratio10.6:1
Induction1x 32mm Dell’Orto carburetor
IgnitionBattery & coil later Electronic CDI
StartingKick
Max Power17 HP / 12.4 kW @ 7000 rpm
Transmission5 Speed
Final DriveChain
Front SuspensionOil damper Ceriant telescopic fork
Rear SuspensionPivoted fork and Betor dampers 3-way adjustment
Front BrakesSingle disc
Rear BrakesDrum
Front Tyre3.25-19
Rear Tyre4.00-18
Wet Weight143.0 kg / 315.3 lbs
Fuel Capacity10.5 Litres / 2.7 US gal
Road TestYamaha XS250S Cagiva SST250. Suzuki GS250T Which Bike 1980