MotorcycleSpecifications.com

The motorcycle referenceMakes / Models / Technical data

Aprilia Specifications

Aprilia Tuareg 600 Wind (1988-89)

Entry updated

Aprilia Tuareg 600 Wind (1988-89)

At a glance

Capacity
562 cc / 34.3 cu in
Power
34 kW / 46 hp @7100 rpm
Torque
58 Nm / 5.9 kgf-m / 42.8 ft-lb @ 5800 rpm

The full picture.

The Aprilia Tuareg 600 Wind was a motorcycle produced from 1988 to 1989. It had a single-cylinder, air-cooled, four-stroke engine with a capacity of 562cc and a compression ratio of 9.4:1. The bike was equipped with a ~A35mm Dell’Orto carburetor and Nipponese electronic ignition. It had an electric starter and produced a maximum power of 34 kW (46 hp) at 7,100 rpm and a maximum torque of 58 Nm at 5,800 rpm. The bike featured a six-speed transmission and a chain final drive. The front suspension consisted of ~A40 mm telescopic forks with 210 mm of travel, while the rear suspension was a monoshock with adjustable preload and 220 mm of travel. Braking was handled by a single ~A300 mm disc with a two-piston caliper on the front and a single ~A220 mm disc on the rear. The bike had a front tire size of 90/90-21 and a rear tire size of 130/80-18.


Technical specifications:

Make Model: Aprilia Tuareg 600 Wind

Motorcycle technical specifications
Year1988 – 89
EngineFour stroke, single cylinder, SOHC, 4 valves
Capacity562 cc / 34.3 cu in
Bore x Stroke94 x 81 mm
Compression Ratio9.4:1
Cooling SystemAir cooled
LubricationWet sump
Induction~A35 mm Dell’Orto PHBR35BD carburetor
IgnitionNipponese electronic
StartingElectric
Max Power34 kW / 46 hp @7100 rpm
Max Power Rear Tyre29.9 kW / 40.07 hp @ 7000 rpm
Max Torque58 Nm / 5.9 kgf-m / 42.8 ft-lb @ 5800 rpm
Transmission6 Speed
Final DriveChain
Front Suspension~A40 mm Telescopic forks
Front Wheel Travel210 mm / 8.3 in
Rear SuspensionMonoshock with adjustable preload.
Rear Wheel Travel220 mm / 8.7 in
Front BrakesSingle ~A300 mm disc, 2 piston caliper
Rear BrakesSingle ~A220 mm disc
Front Tyre90/90-21
Rear Tyre130/80-18