Aprilia RSV 4 Factory (2009)

The Aprilia RSV-4 Factory motorcycle from 2009 boasts a four-stroke, longitudinal 65-degree V four engine with DOHC and 4 valves per cylinder, and a capacity of 998.9 cc or 61 cubic inches. Other features include variable height intake trumpets, a four-throttle body with 8 injectors, and ride-by-wire fuel management with multi-mapping. The bike also has wet sump lubrication with two oil pumps, electronic digital ignition integrated into the fuel management system, and a multi-plate wet clutch with a slipper device. The six-speed transmission has a chain drive ratio of 40/16. The double beam aluminum frame has mixed cast and pressed sheet sections with adjustments for headstock position and angle, engine height, and swingarm pivot height. The front suspension features a Ohlins A43 mm upside-down fork with adjustments for preload, compression, and rebound, while the rear suspension has a double arch aluminum swingarm with an Ohlins monoshock and APS rising rate linkages. The front brakes are lightweight stainless steel floating discs with Brembo monobloc radial calipers with four opposed pistons and sintered pads, and the rear brakes are a single disc with a Brembo floating caliper with two insulated pistons. The bike has a fuel capacity of 17 L, weighs 179 kg when dry and 205 kg when wet, and has a top speed of 289.9 km/h or 180.14 mph.

Technical specifications:

Make Model: Aprilia RSV-4 Factory