Aprilia RS 125 R Valentino Rossi Replica (1999-00)

The Aprilia RS 125 R Valentino Rossi Replica motorcycle was produced in 1999-2000 and features a single cylinder, two-stroke engine with reed valve induction and 125cc capacity. The compression ratio is 14.5:1 and the cooling system is liquid-cooled with Dell’Orto VHSB 34LD induction and electronic ignition. The motorcycle has a maximum power output of 24.8 kW / 34 hp at 11,000 rpm and a max torque of 25 Nm / 2.5 kgf-m / 18.4 lb-ft at 9,000 rpm.

The transmission is a 6-speed manual with final drive being delivered through a chain mechanism. It has upside-down front forks of 40mm and a rear monoshock with 120mm / 4.7inch wheel travel. The front brakes consist of a single 320mm disc with a 4-piston caliper and the rear brakes comprise of a single 240mm disc with a 2-piston caliper.

The front and rear tyre sizes are 110/70-17 and 150/60-17, respectively. The dry weight of the motorcycle is 115 kg / 254 lbs. The motorcycle is popular among racing enthusiasts as it is a reliable and powerful vehicle with good suspension and braking systems.

Technical specifications:

Make Model: Aprilia RS 125 R Valentino Rossi Replica

Year: 1999 – 00
Engine: Single cylinder, two stroke, reed valves induction
Capacity: 125 cc / 7.6 cu in
Bore x Stroke: 54 x 54.5mm
Compression Ratio: 14.5:1
Cooling System: Liquid cooled
Induction: Dell’Orto VHSB 34LD
Ignition: Electronic
Starting: Electric
Max Power: 24.8 kW / 34 hp @ 11000 rpm
Max Torque: 25 Nm / 2.5 kgf-m / 18.4 lb-ft @ 9000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Upside-down forks, 40mm
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Monoshock
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: Single 320 mm discs, 4 piston caliper
Rear Brakes: Single 240 mm disc, 2 piston caliper
Front Tyre: 110/70-17
Rear Tyre: 150/60-17
Dry Weight: 115 kg / 254 lbs