Aprilia RS 125 R Lorenzo Replica (2007)

The Aprilia RS 125 R Lorenzo Replica is a 2007 motorcycle with a single cylinder, two-stroke engine and reed valve induction. It has a capacity of 124.8 cc and a compression ratio of 12.5:1. The bike is liquid-cooled and has a separate mixing, volumetric pump for lubrication, along with a Dell’Orto PHBH 28 carburetor for induction and CDI electronic ignition for ignition. It has a maximum power of 21 kW at 10500 rpm and a maximum torque of 19 Nm at 9000 rpm. The clutch is wet, multi-disc and the transmission is six-speed with a chain final drive. The frame is a cast aluminum reinforced box section sloping twin-spar frame, and the front suspension consists of upside-down forks with a travel of 120 mm.

Technical specifications:

Make Model: Aprilia RS 125 R Lorenzo Replica

Year: 2007
Engine: Single cylinder, two stroke, reed valves induction
Capacity: 124.8 cc / 7.5 cu in
Bore x Stroke: 54 x 54.5mm
Compression Ratio: 12.5:1
Cooling System: Liquid cooled
Lubrication: Separate mixing, volumetric pump
Induction: Dell’Orto PHBH 28 carburetor
Ignition: CDI electronic ignition
Starting: Electric
Alternator: 12V, 180W
Max Power: 21 kW / 28 hp @ 10500 rpm
Max Torque: 19 Nm / 1.9 kgf-m / 14.1 lb-ft @ 9000 rpm
Clutch: Wet, multi-disc
Transmission: 6 Speed
Final Drive: Chain
Gear Ratios: 1st 10:30 / 2nd 14:29 / 3rd 17:27 / 4th 19:25 / 5th 21:24 / 6th 22:23
Primary Drive: 63:19
Final Drive: 17:40
Frame: Cast aluminium, reinforced box section, sloping twin-spar frame
Front Suspension: Upside-down forks, 40mm
Front Wheel Travel: 120 mm / 4.7 in