The Aprilia RS 125 R Harada Replica is a motorcycle model from 1999-2000. It has a single cylinder, two-stroke engine with reed valve induction and a capacity of 125 cc. The compression ratio is 14.5:1 and the cooling system is liquid-cooled. The bike has Dell’Orto VHSB 34LD induction and electronic ignition. The maximum power is 24.8 kW or 34 hp at 11,000 rpm, and the maximum torque is 25 Nm at 9,000 rpm. The transmission has six speeds and the final drive is a chain. The bike has upside-down forks with a 40mm front wheel travel and monoshock with 120mm rear wheel travel. The front brakes are single 320mm discs with a 4 piston caliper while the rear brakes are single 240mm discs with a two piston caliper. The bike has a front tyre size of 110/70-17 and a rear tyre size of 150/60-17. The dry weight of the bike is 115 kg or 254 lbs.
Make Model: Aprilia RS 125 R Harada Replica
Year: 1999 – 00
Engine: Single cylinder, two stroke, reed valves induction
Capacity: 125 cc / 7.6 cu in
Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…
Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…
The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…
The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…
The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…
The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…