Aprilia Pegaso 650ie Tuscany Tibet (2003)

The Aprilia Pegaso 650ie Tuscany Tibet motorcycle was produced in 2003 and features a single-cylinder, four-stroke engine with a displacement of 652cc. The engine has a compression ratio of 9.1:1 and is liquid-cooled with an induction system of 2 x ~A32 mm Mikuni BST33. The bike has an electric starter and can produce a maximum power of 36.4 kW at 7000 rpm and a torque of 59 Nm at 6500 rpm. The transmission is five-speed with a chain final drive. The front suspension is ~A45 mm Upside down forks preload adjustable, Marzocci with 175mm of wheel travel, while the rear suspension features a varying section high strength steel swing-arm with Aprilia Progressive System (APS) rising rate linkage. The front brakes are a single ~A300 mm disc with a 2 piston caliper, while the rear single ~A220 mm disc has a 1 piston caliper. The front and rear tires are 100/90-19 and 130/80-17, respectively. The bike has a length of 2159 mm, width of 810 mm, and a wheelbase of 1478 mm. The seat height is 810 mm.

Technical specifications:

Make Model: Aprilia Pegaso 650ie Tuscany Tibet

Year: 2003
Engine: Four stroke, single-cylinder, DOHC, 5 valves
Capacity: 652 cc / 39.8 cu in
Bore x Stroke: 100 x 83 mm
Compression Ratio: 9.1:1
Cooling System: Liquid cooled
Induction: 2 x ~A32 mm Mikuni BST33
Starting: Electric
Max Power: 36.4 kW / 50 hp @ 7000 rpm
Max Torque: 59 Nm / 6.02 kgf-m / 43.5 lb-ft @ 6500 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: ~A45 mm Upside down forks preload adjustable, Marzocci
Front Wheel Travel: 175 mm / 6.9 in
Rear Suspension: Varying section high strength steel swing-arm, Aprilia Progressive System (APS) rising rate linkage
Front Brakes: Single ~A300 mm disc, 2 piston caliper
Rear Brakes: Single ~A220 mm disc, 1 piston caliper
Front Tyre: 100/90-19
Rear Tyre: 130/80-17
Dimensions: Length: 2159 mm / 85.0 in Width: 810 mm / 31.9 in
Wheelbase: 1478 mm / 58.2 in
Seat Height: 810 mm / 31.9 in