The Aprilia Pegaso 650ie, produced from 2001-02, has a four stroke, single-cylinder, DOHC 5 valve engine with a capacity of 652cc/39.8 cu in. It has a compression ratio of 9.1:1 and is liquid-cooled, with an induction of two ~A32mm Mikuni BST33 carburettors. The motorcycle is electrically started and can generate a maximum power output of 36.4 kW/50 hp @ 7000 rpm and 59 Nm/6.02 kgf-m/43.5 lb-ft of torque at 6500 rpm. The transmission has five speeds and a chain drive for the final drive. It has ~A45mm upside-down forks that are preload adjustable Marzocci, with a front wheel travel of 175mm/6.9in, while the rear wheel is supported by varying section high strength steel swing-arm with Aprilia Progressive System rising rate linkage. The front and rear brakes are a single A300 mm disc and A220 mm disc, respectively, with a 2 piston caliper and 1 piston caliper. The dimensions of the bike are 2159 mm/85.0 in length, 810 mm/31.9 in width, a wheelbase of 1478 mm/58.2 in, and a seat height of 810 mm/31.9 in. The front tyre is 100/90-19 and the rear tyre is 130/80-17.
Make Model: Aprilia Pegaso 650ie
Year: 2001 – 02
Engine: Four stroke, single-cylinder, DOHC, 5 valves
Capacity: 652 cc / 39.8 cu in
Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…
Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…
The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…
The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…
The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…
The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…