Aprilia Pegaso 650 Trail (2006-07)

The Aprilia Pegaso 650 Strada was produced in 2006 and 2007. The motorcycle has a four-stroke, single cylinder engine with a capacity of 659cc and a compression ratio of 10.0:1. It is liquid-cooled and has an electronic fuel injection induction system with a 44mm throttle body. The ignition is digital and starting is electronic. The maximum power output is 36.4 kW / 48 hp at 6250 rpm and the maximum torque is 61.3 Nm / 6.25 kgf-m / 45.2 lb-ft at 5200 rpm. The clutch is multi-plate in oil bath and the transmission is a 5-speed with a final drive of chain. The frame is made of steel with an open cradle, single spar frame. The front suspension is a 45mm Marzocchi telescopic fork with a travel of 170 mm / 6.7 in. The rear suspension is a high strength steel swingarm with Aprilia Progressive System (APS) rising rate linkages and a Sachs hydraulic monoshock with adjustable rebound and preload. The motorcycle meets Euro 2 emission standards and has a dry sump with oil pump lubrication system.

Technical specifications:

Make Model: Aprilia Pegaso 650 Strada

Year: 2006 – 07

Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 659 cc / 40.2 in
Bore x Stroke: 100 x 84 mm
Compression Ratio: 10.0:1
Cooling System: Liquid cooled
Lubrication: Dry sump with oil pump
Emission Standard: Euro 2
Induction: Electronic fuel injection. ~A44mm throttle body
Ignition: Digital
Starting: Electric
Max Power: 36.4 kW / 48 hp @ 6250 rpm
Max Torque: 61.3 Nm / 6.25 kgf-m / 45.2 lb-ft @ 5200 rpm
Clutch: Multi-plate in oil bath
Transmission: 5 Speed
Final Drive: Chain

Gear Ratios: 1st 12:30 / 2nd 16/26 / 3rd 20/23 / 4th 22:20 / 5th 26:20
Frame: Steel, open cradle, single spar frame
Front Suspension: ~A45 mm Marzocchi telescopic fork
Front Wheel Travel: 170 mm / 6.7 in
Rear Suspension: High strength steel swingarm. Aprilia Progressive System (APS) rising rate linkages. Sachs hydraulic monoshock with adjustable rebound and preload.

Related models: