The Aprilia Pegaso 650 Outback is a motorcycle that was manufactured between 2000 and 2001. It has a single-cylinder, four-stroke engine with a capacity of 652cc and a compression ratio of 9.1:1. The cooling system is liquid-cooled and the bike has a 5-speed transmission and chain drive. The front suspension is adjustable upside-down forks, while the rear suspension is a varying section high strength steel swing-arm with the Aprilia Progressive System (APS) rising rate linkage. The front and rear brakes are single-disc with 2-piston caliper and 1-piston caliper, respectively. The dimensions of the bike are 2159 mm length, 810 mm width and a wheelbase of 1478 mm, while the seat height is at 810 mm. The Aprilia Pegaso 650 Outback has a maximum power of 36.4 kW / 50 hp at 7000 rpm, and its maximum torque is 59 Nm / 6.02 kgf-m / 43.5 lb-ft at 6500 rpm. Its front and rear tyres are 100/90-19 and 130/80-17 respectively.
Technical specifications:
Make Model: Aprilia Pegaso 650 Outback
| Year | 2000 – 01 |
|---|---|
| Engine | Four stroke, single-cylinder, DOHC, 5 valves |
| Capacity | 652 cc / 39.8 cu in |
| Bore x Stroke | 100 x 83 mm |
| Compression Ratio | 9.1:1 |
| Cooling System | Liquid cooled |
| Induction | 2 x ~A32 mm Mikuni BST33 |
| Starting | Electric |
| Max Power | 36.4 kW / 50 hp @ 7000 rpm |
| Max Torque | 59 Nm / 6.02 kgf-m / 43.5 lb-ft @ 6500 rpm |
| Transmission | 5 Speed |
| Final Drive | Chain |
| Front Suspension | ~A45 mm Upside down forks preload adjustable, Marzocci |
| Front Wheel Travel | 175 mm / 6.9 in |
| Rear Suspension | Varying section high strength steel swing-arm, Aprilia Progressive System (APS) rising rate linkage |
| Front Brakes | Single ~A300 mm disc, 2 piston caliper |
| Rear Brakes | Single ~A220 mm disc, 1 piston caliper |
| Front Tyre | 100/90-19 |
| Rear Tyre | 130/80-17 |
| Dimensions | Length: 2159 mm / 85.0 in Width: 810 mm / 31.9 in |
| Wheelbase | 1478 mm / 58.2 in |
| Seat Height | 810 mm / 31.9 in |
