The Aprilia Moto 6.5 motorcycle was produced from 1995 to 2002. It features a four-stroke, single-cylinder, DOHC engine with a capacity of 649cc and a compression ratio of 9.0:1. The cooling system is liquid-cooled and it has a Mikuni carburetor with a diameter of approximately 40 mm. The ignition is digital and it starts with an electric starter. The maximum power output is 31.3 kW (43 hp) at 7000 rpm, with rear tire power of 30.4 kW (40.8 hp) at 6500 rpm, and the maximum torque is 53 Nm (39.1 lb-ft) at 5000 rpm. It has a five-speed transmission and a chain final drive. The frame is made of tubular steel, and the front suspension features telescopic forks with approximately 41 mm diameter and Marzocchi suspension. The rear suspension has a rising rate monoshock with preload adjustment and Matzocchi suspension. The front brakes consist of a single disc with approximately 298 mm diameter and a four-piston caliper, while the rear brakes have a single disc with approximately 220 mm diameter and a two-piston caliper. The front and rear tires are a 100/90-18 and 130/90-17 respectively. The seat height is approximately 780 mm (30.7 in).
Make Model: Aprilia Moto 6.5
Year: 1995-02
Engine: Four stroke, single cylinder, DOHC, 5-valves
Capacity: 649 cc / 39.6 cu in
Make Model: Moto Guzzi V7 750 Sport Verde Legnano Year: 1971 – Engine: Four stroke,…
Make Model: Moto Guzzi V9 Roamer Year: 2016 – 17 Engine: Transversal 90 degrees V-twin,…
The Honda XL 600V Transalp is a motorcycle model that was produced in 1996. It…
The Yamaha FZ 250 Fazer is a motorcycle model that was released in 1985. It…
The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4…
The BSA A65R (Thunderbolt) motorcycle was produced from 1964 to 1972, and was marketed in…